Commission Regulation (EC) No 105/2005 of 17 November 2004 amending Council Regulation (EC) No 1420/1999 and Regulation (EC) No 1547/1999 as regards shipments of certain types of waste to China and Saudi ArabiaText with EEA relevance
105/2005 • 32005R0105
Legal Acts - Regulations
- Inbound citations: 4
- •
- Cited paragraphs: 0
- •
- Outbound citations: 18
22.1.2005
EN
Official Journal of the European Union
L 20/9
COMMISSION REGULATION (EC) No 105/2005
of 17 November 2004
amending Council Regulation (EC) No 1420/1999 and Regulation (EC) No 1547/1999 as regards shipments of certain types of waste to China and Saudi Arabia
(Text with EEA relevance)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Council Regulation (EEC) No 259/93 of 1 February 1993 on the supervision and control of shipments of waste within, into and out of the European Community (1), and in particular Article 17(3) thereof,
Having regard to Council Regulation (EC) No 1420/1999 of 29 April 1999 establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste (2), and in particular Article 3(5) thereof,
Whereas:
(1)
On 4 August 2003, the Ministry of Defence and Aviation, Presidency of Meteorology and Environment of the Kingdom of Saudi Arabia sent a request to the European Commission that normal commercial transactions (‘green list’ procedure) apply to the material GH 014 ‘waste, parings and scrap of polyurethane foam not containing chlorofluorocarbons’.
(2)
On 13 May 2004, the Mission of the People’s Republic of China to the European Communities sent a request to the European Commission for an amendment to the list of wastes in Annex D to Commission Regulation (EC) No 1547/1999 (3) which are allowed without recourse to any of the control procedures provided for in Council Regulation (EEC) No 259/93. This amended list will be subject, as before, to additional pre-shipment inspection procedures under the responsibility of the Chinese authorities.
(3)
In accordance with Article 17(3) of Regulation (EEC) No 259/93, the committee set up by Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste (4) was notified of the official requests of Saudi Arabia and of China on 2 April 2004 and 18 May 2004.
(4)
In order to take into account the new situation of these countries, it is necessary to amend at the same time Regulation (EC) No 1420/1999 and Regulation (EC) No 1547/1999.
(5)
The measures provided for in this Regulation are in accordance with the opinion of the Committee set up by Article 18 of Directive 75/442/EEC,
HAS ADOPTED THIS REGULATION:
Article 1
Annex D to Regulation (EC) No 1547/1999 is amended as set out in Annex I to this Regulation.
Article 2
Annex A to Regulation (EC No 1420/1999 is amended as set out in Annex II to this Regulation.
Article 3
This Regulation shall enter into force on the twentieth day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 17 November 2004.
For the Commission
Pascal LAMY
Member of the Commission
(1) OJ L 30, 6.2.1993, p.1. Regulation as last amended by Commission Regulation (EC) No 2557/2001 (OJ L 349, 31.12.2001, p. 1).
(2) OJ L 166, 1.7.1999, p. 6. Regulation as last amended by Commission Regulation (EC) No 2118/2003 (OJ L 318, 3.12.2003, p. 5).
(3) OJ L 185, 17.7.1999, p. 1. Regulation as last amended by Regulation (EC) No 2118/2003.
(4) OJ L 194, 25.7.1975, p. 39. Directive as last amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council (OJ L 284, 31.10.2003, p. 1).
ANNEX I
Annex D to Regulation (EC) No 1547/1999 is amended as follows:
1.
In Annex D, between the entry relating to São Tomé and Príncipe and the entry relating to Sierra Leone, the following entry is inserted:
‘SAUDI ARABIA
GH 014 ex ex 3915 90 Waste, parings and scrap of plastics of polyurethane (not containing chlorofluorocarbons).’
2.
In Annex D, between the entry relating to Chile and the entry related to The Comoros, the entry relating to China should be deleted and the following entry inserted:
‘CHINA
Pre-shipment inspection is required by the Chinese authorities
1.
In section GA (Metal and metal-alloy wastes in metallic, non-dispersible form) (1)
GA 120
7404 00
Copper waste and scrap
GA 130
7503 00
Nickel waste and scrap
GA 140
7602 00
Aluminium waste and scrap
GA 160
7902 00
Zinc waste and scrap
GA 170
8002 10
Tin waste and scrap
GA 200
ex ex 8103 10
Tantalum waste and scrap
GA 430
7204
Iron or steel scrap.
2.
In section GC (Other wastes containing metals):
GC 030
ex ex 8908 00
Vessels and other floating structures for breaking up, properly emptied of any cargo and other materials arising from the operation of the vessel which may have been classified as a dangerous substance or waste
GC 070
ex ex 2619 00
Slags arising from the manufacture of iron and carbon steel (including low alloy steel) excluding those slags which have been specifically produced to meet both national and relevant international requirements and standards (2)
3.
In section GH (Solid plastic wastes):
Including, but not limited to:
GH 010
3915
Waste, parings and scrap of plastics of:
GH 011
ex ex 3915 10
Polymers of ethylene
GH 012
ex ex 3915 20
Polymers of styrene
GH 013
ex ex 3915 30
Polymers of vinyl chloride
GH 014
ex ex 3915 90
Polymers or copolymers, for example:
—
Polypropylene
—
Polyethylene terephthalate
—
Acrylonitrile copolymer
—
Butadiene copolymer
—
Styrene copolymer
—
Polyamides
—
Polybutylene terephthalates
—
Polycarbonates
—
Polyphenylene sulphides
—
Acrylic polymers
—
Paraffins (C10-C13) (4)
—
Polyurethane (not containing chlorofluorocarbons)
—
Polysiloxalanes (silicones)
—
Polymethyl metharcrylate
—
Polyvinyl alcohol
—
Polyvinyl butyral
—
Polyvinyl acetate
—
Polymers of fluorinated ethylene (Teflon, PTFE)
GH 015
ex ex 3915 90
Resins or condensation products, for example:
—
Urea formaldehyde resins
—
Phenol formaldehyde resins
—
Melamine formaldehyde resins
—
Epoxy resins
—
Alkyd resins
—
Polyamides.
4.
In section GI (Paper, paperboard and paper product wastes):
GI 010
4707
Waste and scrap of paper or paperboard:
GI 011
4707 10
—
Of unbleached kraft paper or paperboard or of corrugated paper or paperboard
GI 012
4707 20
—
Of other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass
GI 013
4707 30
—
Of paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)
GI 014
4707 90
—
Other, including but not limited to:
1.
Laminated paperboard
2.
Unsorted waste and scrap.
5.
In section GJ (Textile wastes):
GJ 030
5202
Cotton waste (including yarn waste and garnetted stock)
GJ 031
5202 10
— Yarn waste (including thread waste)
GJ 032
5202 91
— arnetted stock
GJ 033
5202 99
— Other
GJ 110
5505
— Waste (including noils, yarn waste and garnetted stock) of man-made fibres
GJ 111
5505 10
— Of synthetic fibres
GJ 112
5505 20
— Of artificial fibres.
6.
In section GL (Untreated cork and wood wastes):
GL 010
ex ex 4401 30
Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
GL 020
4501 90
Cork waste; crushed, granulated or ground cork.
7.
In section GM (Wastes arising from agro-food industries):
GM 100
0506 90
Waste of bones and horn-cones, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised.’
(1) “Non-dispersible” does not include any waste in the form of powder, sludge, dust or solid items containing encased hazardous liquids.
(2) This entry covers the use of such slags as a source of titanium dioxide and vanadium.
ANNEX II
Annex A to Regulation (EC) No 1420/1999 is amended as follows:
In Annex A to Regulation (EC) No 1420/1999, the entry relating to Saudi Arabia is replaced by the following:
‘All types except:
In section GH (Solid Plastic Wastes):
GH 014 ex ex 3915 90 Waste, parings and scrap of plastics of polyurethane not containing chlorofluorocarbons.’