Council Regulation (EC) No 1420/1999 of 29 April 1999 establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste
1420/1999 • 31999R1420
Legal Acts - Regulations
- 90 Inbound citations:
- •
- 2 Cited paragraphs:
- •
- 41 Outbound citations:
Avis juridique important
Council Regulation (EC) No 1420/1999 of 29 April 1999 establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste Official Journal L 166 , 01/07/1999 P. 0006 - 0028
COUNCIL REGULATION (EC) No 1420/1999 of 29 April 1999 establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty establishing the European Community, and in particular Articles 113 and 130s(1) thereof, Having regard to the proposal from the Commission(1), Having regard to the opinion of the Economic and Social Committee(2), Acting in accordance with the procedure laid down in Article 189c of the Treaty(3), (1) Whereas Article 1(3)(a) of Council Regulation (EEC) No 259/93 of 1 February 1993 on the supervision and control of shipments of waste within, into and out of the European Community(4) excludes from the scope of application of that Regulation shipments of waste destined for recovery only and listed in Annex II thereto, except as provided for in, inter alia, Article 17(1), (2) and (3); (2) Whereas, in accordance with Article 17(1) of Regulation (EEC) No 259/93, the Commission has notified to every country to which the OECD Council Decision of 30 March 1992 on the control of transfrontier movements of waste destined for recovery operation does not apply the list of waste set out in Annex II to the said Regulation and has requested confirmation that such waste is not subject to control in the country of destination, or has asked that such countries indicate whether such waste should be subject to the control procedures which apply to waste listed in Annex III or IV to the said Regulation or to the procedure laid down in Article 15 thereof; (3) Whereas certain countries have indicated that such waste should be subject to one or other of those control procedures and the Commission on 20 July 1994, pursuant to the provisions of Article 17(3) of the said Regulation adopted Decision 94/575/EC(5) to determine the appropriate control procedures; (4) Whereas the second subparagraph of Article 17(1) of Regulation (EEC) No 259/93 provides that if such confirmation is not received, the Commission is to make appropriate proposals to the Council; whereas it is therefore necessary to establish, on a Community-wide basis, a system to regulate trade in such waste from the Community by establishing the appropriate common rules and procedures relating to exports thereof; (5) Whereas, in the case of countries which have replied that they do not wish to receive some or all types of waste listed in Annex II to the said Regulation, their will must be respected and therefore those types of waste cannot be exported to those countries; (6) Whereas, in the case of countries which have not replied, silence cannot be taken as implying consent and therefore it is appropriate to adopt a similar regulatory framework in order to enable such countries to evaluate such shipments on a case-by-case basis; (7) Whereas, in the case of countries which have replied that they do not wish to receive some or all types of waste listed in Annex II or have not replied, the possibility exists that they will change their position, or will reply in the future, and a mechanism must, therefore, exist within a comitology procedure, to change this Regulation; (8) Whereas the Commission will, as soon as possible and at the latest before 1 July 1998, review and amend Annex V to Regulation (EEC) No 259/93 taking into full consideration those wastes featuring on the list of wastes adopted in accordance with Article 1(4) of Council Directive 91/689/EEC of 12 December 1991 on hazardous waste(6), and any list of wastes characterised as hazardous for the purposes of the Basel Convention, and will adapt Regulation (EEC) No 259/93 accordingly; (9) Whereas the Commission should provide information to countries covered by this Regulation on changes to Annexes A and B on a regular basis; (10) Whereas with regard to shipments to ACP countries, Article 39 of the Fourth ACP-EC Convention prohibits exports of all waste listed in Annexes I and II of the Basel Convention; whereas, furthermore, certain items of such waste can be found in Annex II to Regulation (EEC) No 259/93; whereas, in these circumstances and in order to respect the Community's international obligations shipments of such items to ACP countries have to be prohibited; (11) Whereas it must be made clear that such items are excluded from the scope of this Regulation; (12) Whereas the arrangements covered by this Regulation should be subject to periodic review by the Commission, HAS ADOPTED THIS REGULATION: Article 1 The export of waste listed in Annex II to Regulation (EEC) No 259/93 and mentioned in Annex A to this Regulation to countries listed in said Annex A shall be prohibited. Article 2 The control procedure laid down in Article 15 of Regulation (EEC) No 259/93 shall apply to exports to the countries listed in Annex B to this Regulation with respect to those categories of waste destined for recovery only and listed in Annex II to Regulation (EEC) No 259/93. Article 3 1. Upon request by the country of destination the control procedure applicable to that country under this Regulation shall be amended in accordance with this Article. 2. The Commission shall determine, in accordance with the procedure laid down in Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste(7), and in cooperation with the country concerned, which of the control procedures shall apply, that is to say: (i) the procedure applicable to wastes listed in Annex III or Annex IV to Regulation (EEC) No 259/93, or (ii) the procedure laid down in Article 15 of Regulation (EEC) No 259/93, or (iii) none of the procedures referred to in paragraphs (i) and (ii) above. 3. The Commission shall inform the Member States of the change of position of a country of destination within 21 days of receipt of the request from that country and shall submit its proposed determination to the Committee established under said Article 18 of Directive 75/442/EEC as soon as possible within three months of receipt of the request. 4. Furthermore, where there is any other exceptional change of circumstances, for example, war, natural disaster or a trade embargo decided by the United Nations, which would affect the control procedure applicable under this Regulation, this control procedure may be amended. The Commission may determine, after consultation with the country of destination, as appropriate, and in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, which of the procedures referred to in paragraph 2 of this Article shall apply. 5. The Commission shall, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, regularly review Annexes A and B of this Regulation, in order to bring them into line with the amendments made to the Annexes to Regulation (EEC) No 259/93. Article 4 The control procedures established by this Regulation shall be subject to periodic review by the Commission and for the first time no later than nine months following its publication in the Official Journal, taking into account the experience gained. If the results of the review lead to the conclusion that it would be appropriate, the Commission may, without prejudice to the provisions of Article 3, make new proposals to the Council. Article 5 The Commission, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, shall, as soon as possible, review and amend this Regulation in order to bring it into line with Regulation (EEC) No 259/93. Article 6 This Regulation shall enter into force on the 90th day following that of its publication in the Official Journal of the European Communities. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 29 April 1999. For the Council The President W. MÜLLER (1) OJ C 214, 10.7.1998, p. 74. (2) Opinion delivered on 29 April 1998 (OJ C 169, 16.6.1999). (3) Opinion of the European Parliament of 17 July 1997 (OJ C 286, 22.9.1997, p. 23), Council common position of 4 June 1998 (OJ C 333, 30.10.1998, p. 1 ) and Decision of the European Parliament of 9 February 1999 (OJ C 250, 28.5.1999). (4) OJ L 30, 6.2.1993, p. 1. Regulation as last amended by Regulation (EC) No 120/97 (OJ L 22, 24.1.1997, p.14). (5) OJ L 220, 25.8.1994, p. 15. (6) OJ L 377, 31.12.11, p. 20. Directive amended by Directive 94/31/EC (OJ L 168, 2.7.1994, p. 28). (7) OJ L 194, 25.7.1975, p. 39. Directive as last amended by Commission Decision 96/350/EC (OJ L 135, 6.6.1996, p. 32). ANNEX A Countries and territories which have indicated to the Commission that they do not wish to receive shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93 ALBANIA All types except: 1. In Section GA ("Metal and metal-alloy wastes in metallic, no-dispersible form"): (a) the following ferrous waste and scrap of iron and steel: >TABLE> (b) the following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. All types included in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"): 3. All types included in section GE ("Glass waste in non-dispersible form"). 4. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"): >TABLE> 5. All types in section GI ("Paper, paperboard and paper product wastes"). 6. In section GJ ("Textile wastes"): >TABLE> ANDORRA All types ANTIGUA and BARBUDA All types ARUBA All types BAHAMAS All types BARBADOS All types BELIZE All types BHUTAN All types BOLIVIA All types BOTSWANA All types BRAZIL All types except: 1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"): (a) the following ferrous waste and scrap of iron and steel: >TABLE> (b) the following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"): >TABLE> 3. In section GC ("Other wastes containing metals" [...] >TABLE> 4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"). >TABLE> 5. In section GG ("Other wastes containing principally inorganic constituents, which mas contain metals and organic materials") >TABLE> 6. In section GH ("Solid plastic wastes"): >TABLE> 7. In section GJ ("Textile wastes") >TABLE> 8. In section GK ("Rubber wastes"): >TABLE> 9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"): >TABLE> BULGARIA All types except: 1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"): (a) The following waste and scrap of precious metals and their alloys: >TABLE> N.B.: Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams (b) The following ferrous waste and scrap of iron or steel: >TABLE> (c) The following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"): >TABLE> 3. In section GC ("Other wastes containing metals") >TABLE> 4. In section GH ("Solid plastic wastes"): >TABLE> 5. All types in section GI ("Paper, paperboard and paper product wastes"). BURKINA FASO All types except: All types in section GA ("Metal and metal-alloy wastes in metallic, non-disprsible(1) from") CAMEROON All types except: 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispesible form") (a) The following waste and scrap of precious metals and their alloys: >TABLE> N.B. Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams (b) The following ferrous waste and scrap of iron or steel: >TABLE> 2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals") >TABLE> 3. In section GC ("Other wastes containing metals") >TABLE> 4. In section GE ("Glass waste in non-dispersible form") >TABLE> 5. In section GF ("Ceramic wastes in non-dispersible form") >TABLE> 6. In section GH ("Solid plastic wastes") >TABLE> 7. All types in section GI ("Paper, paperboard and paper product wastes") 8. In section GJ ("Textile wastes") >TABLE> 9. In section GK ("Rubber wastes") >TABLE> 10. All types in section GL ("RUntreatea cork and waad wastes") 11. In section GM ("Woetes orisins from agro-food industries") >TABLE> CAPE VERDE All types COLOMBIA 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(2) form"): All types of waste and scrap of non-ferrous metals and their alloys: [...] 2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"): >TABLE> 3. In section GC ("Other wastes containing metals"): >TABLE> 4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"): >TABLE> 5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"): >TABLE> 6. In section GH ("Solid plastic wastes"): >TABLE> 7. In section GJ ("Textile wastes"): >TABLE> 8. In section GK ("Rubber wastes"): >TABLE> 9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"): >TABLE> COMOROS, Federal Islamic republic All types except: In section GJ ("Textile wastes"): >TABLE> COSTA RICA All types DOMINICA All types DOMINICAN REPUBLIC All types DJIBOUTH All types EGYPT All types except: 1. All types in section GA ("Metal and metal-alloy wastes in metallic non-dispersible form"). 2. All types in section GI ("Paper, paperboard and paper product wastes"). 3. All types in section GJ ("Textile wastes"). FIJI All types GAMBIA All types except:In section GJ ("Textile wastes"): >TABLE> GHANA All types GRENADA All types except:In section GK ("Rubber wastes"): >TABLE> GUYANA All types KIRIBATI All types KUWAIT All types except:In section GH ("Solid plastic wastes"): >TABLE> LEBANON All types except:In section GJ ("Textile wastes"): >TABLE> MALAWI All types excepts: 1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"). 2. All types in section GE ("Glass waste in non-dispersible form"). 3. All types in section GI ("Paper, paperboard and paper product wastes"). 4. In section GJ ("Textile wastes"): >TABLE> MALDIVES All types MALI 1. In section GA ("Metal and metal-alloy wastes in metallic, non dispersible(3) form") All types of waste and scrap of non-ferrous metals and their alloys. 2. All types in section GE ("Glass waste in non-dispersible form"). 3. All types in section GF ("Ceramic wastes in non-dispersible form") 4. All types in section GH ("Solid plastic wastes") 5. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use") MOLDOVA All types MONGOLIA All types MYANMAR All types NICRAGUA All types NIGER All types except: 1. In section GJ ("Textile wastes") >TABLE> 2. In section GK ("Rubber wastes") >TABLE> NIGERIA All types except:All types in section GH ("Solid plastic wastes") PAKISTAN 1. In section GK ("Rubber wastes"): >TABLE> 2. In section GM ("Wastes arising from agro-food industries"): >TABLE> 3. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"): >TABLE> PAPUA NEW GUINEA All types PARAGUAY All types except: 1. All types included in section GI ("Paper, paperboard and paper product wastes") 2. In section GJ ("Textile wastes"): >TABLE> 3. In section GL ("Untreated cork and wood wastes"): >TABLE> PERU All types SÃO TOME AND PRINCIPE All types except: 1. In section GJ ("Textile wastes"): >TABLE> 2. In section GK ("Rubber wastes"): >TABLE> SAUDIA ARABIA All types SENEGAL All types SEYCHELLES All types SINGAPORE All types except: 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"): (a) The following waste and scrap of precious metals and their alloys: >TABLE> N.B.: Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams (b) the following ferrous waste and scrap of iron or steel: >TABLE> (c) the following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. In section GC ("Other wastes containing metals"): >TABLE> 3. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"): >TABLE> 4. In section GH ("Solid plastic wastes"): >TABLE> ST. KITTS AND NEVIS All types ST LUCIA All types ST VINCENT AND THE GRENADINES All types TANZANIA All types except:In section GJ ("Textile wastes"): >TABLE> UGANDA All types except: 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form") >TABLE> 2. In section GJ ("Textile wastes") >TABLE> TUVALU All types VANUATU All types WESTERN SAMOA All types (1) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids. (2) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids. (3) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids. ANNEX B Countries and territories which have not responded to the Commission's communications on shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93 AFGHANISTAN All types ALGERIA All types ANGOLA All types except: 1. All types in section GA ("Metal and metal alloy wastes in metallic, non-dispersible form"). 2. All types in section GE ("Glass wastes in non-dispersible form"). 3. All types in section GI ("Paper, paperboard and paper product wastes"). 4. All types in section GJ ("Textile wastes"). 5. All types in section GK ("Rubber wastes"). ARMENIA All types AZERBAIJAN All types BAHRAIN All types BANGLADESH All types BRUNEI All types BURUNDI All types CAMBODIA All types ECUADOR All types EL SALVADOR All types EQUATORIAL GUINEA All types ERITREA All types ETHIOPIA All types FORMER YUGOSLAV REPUBLIC OF MACEDONIA All types GABON All types GUATEMALA All types GUINEA All types except: In section GJ ("Textile wastes"): >TABLE> HAITI All types HONDURAS All types IVORY COAST All types KAZAKHSTAN All types KYRGYSTAN All types LAOS All types LESOTHO All types MOROCCO All types MOZAMBIQUE All types NAMIBIA All types NEPAL All types OMAN All types PANAMA All types QATAR All types RUSSIAN FEDERATION All types except: 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"): (a) The following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"): >TABLE> 3. In section GC ("Other wastes containing metals"): >TABLE> 4. In section GD ("Waste from mining operations: these wastes to be in non-dispersible form"): >TABLE> 5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic metals"): >TABLE> 6. All types included in section GH ("Solid plastic wastes"). 7. In section GJ ("Textile wastes"): >TABLE> 8. All types included in section GK ("Rubber wastes"). 9. In section GM ("Wastes arising from agro-food industries"): >TABLE> 10. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"): >TABLE> 11. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"): >TABLE> SOLOMON ISLANDS All types SUDAN All types SWAZILAND All types SYRIA All types TAJIKISTAN All types TONGA All types TUNISIA All types in Annex II except: 1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"): (a) The following ferrous waste and scrap of iron and steel: >TABLE> (b) The following waste and scrap of non-ferrous metals and their alloys: >TABLE> 2. In section GC ("Other wastes containing metals"): >TABLE> 3. All types in section GH ("Solid plastic wastes"). 4. All types in section GI ("Paper, paperboard and paper product wastes"). 5. In section GJ ("Textile wastes"): >TABLE> 6. All types in section GK ("Rubber wastes"). 7. In section GM ("Wastes arising from agro-food industries"): >TABLE> 8. In section GN ("Wastes arising from tanning and fellmongery operations and leather use") >TABLE> TURKMENISTAN All types UZBEKISTAN All types VATICAN CITY All types VENEZUELA All types VIETNAM All types YEMEN All types ZIMBABWE All types
COUNCIL REGULATION (EC) No 1420/1999
of 29 April 1999
establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Articles 113 and 130s(1) thereof,
Having regard to the proposal from the Commission(1),
Having regard to the opinion of the Economic and Social Committee(2),
Acting in accordance with the procedure laid down in Article 189c of the Treaty(3),
(1) Whereas Article 1(3)(a) of Council Regulation (EEC) No 259/93 of 1 February 1993 on the supervision and control of shipments of waste within, into and out of the European Community(4) excludes from the scope of application of that Regulation shipments of waste destined for recovery only and listed in Annex II thereto, except as provided for in, inter alia, Article 17(1), (2) and (3);
(2) Whereas, in accordance with Article 17(1) of Regulation (EEC) No 259/93, the Commission has notified to every country to which the OECD Council Decision of 30 March 1992 on the control of transfrontier movements of waste destined for recovery operation does not apply the list of waste set out in Annex II to the said Regulation and has requested confirmation that such waste is not subject to control in the country of destination, or has asked that such countries indicate whether such waste should be subject to the control procedures which apply to waste listed in Annex III or IV to the said Regulation or to the procedure laid down in Article 15 thereof;
(3) Whereas certain countries have indicated that such waste should be subject to one or other of those control procedures and the Commission on 20 July 1994, pursuant to the provisions of Article 17(3) of the said Regulation adopted Decision 94/575/EC(5) to determine the appropriate control procedures;
(4) Whereas the second subparagraph of Article 17(1) of Regulation (EEC) No 259/93 provides that if such confirmation is not received, the Commission is to make appropriate proposals to the Council; whereas it is therefore necessary to establish, on a Community-wide basis, a system to regulate trade in such waste from the Community by establishing the appropriate common rules and procedures relating to exports thereof;
(5) Whereas, in the case of countries which have replied that they do not wish to receive some or all types of waste listed in Annex II to the said Regulation, their will must be respected and therefore those types of waste cannot be exported to those countries;
(6) Whereas, in the case of countries which have not replied, silence cannot be taken as implying consent and therefore it is appropriate to adopt a similar regulatory framework in order to enable such countries to evaluate such shipments on a case-by-case basis;
(7) Whereas, in the case of countries which have replied that they do not wish to receive some or all types of waste listed in Annex II or have not replied, the possibility exists that they will change their position, or will reply in the future, and a mechanism must, therefore, exist within a comitology procedure, to change this Regulation;
(8) Whereas the Commission will, as soon as possible and at the latest before 1 July 1998, review and amend Annex V to Regulation (EEC) No 259/93 taking into full consideration those wastes featuring on the list of wastes adopted in accordance with Article 1(4) of Council Directive 91/689/EEC of 12 December 1991 on hazardous waste(6), and any list of wastes characterised as hazardous for the purposes of the Basel Convention, and will adapt Regulation (EEC) No 259/93 accordingly;
(9) Whereas the Commission should provide information to countries covered by this Regulation on changes to Annexes A and B on a regular basis;
(10) Whereas with regard to shipments to ACP countries, Article 39 of the Fourth ACP-EC Convention prohibits exports of all waste listed in Annexes I and II of the Basel Convention; whereas, furthermore, certain items of such waste can be found in Annex II to Regulation (EEC) No 259/93; whereas, in these circumstances and in order to respect the Community's international obligations shipments of such items to ACP countries have to be prohibited;
(11) Whereas it must be made clear that such items are excluded from the scope of this Regulation;
(12) Whereas the arrangements covered by this Regulation should be subject to periodic review by the Commission,
HAS ADOPTED THIS REGULATION:
Article 1
The export of waste listed in Annex II to Regulation (EEC) No 259/93 and mentioned in Annex A to this Regulation to countries listed in said Annex A shall be prohibited.
Article 2
Article 3
1. Upon request by the country of destination the control procedure applicable to that country under this Regulation shall be amended in accordance with this Article.
2. The Commission shall determine, in accordance with the procedure laid down in Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste(7), and in cooperation with the country concerned, which of the control procedures shall apply, that is to say:
(i) the procedure applicable to wastes listed in Annex III or Annex IV to Regulation (EEC) No 259/93, or
(ii) the procedure laid down in Article 15 of Regulation (EEC) No 259/93, or
(iii) none of the procedures referred to in paragraphs (i) and (ii) above.
3. The Commission shall inform the Member States of the change of position of a country of destination within 21 days of receipt of the request from that country and shall submit its proposed determination to the Committee established under said Article 18 of Directive 75/442/EEC as soon as possible within three months of receipt of the request.
4. Furthermore, where there is any other exceptional change of circumstances, for example, war, natural disaster or a trade embargo decided by the United Nations, which would affect the control procedure applicable under this Regulation, this control procedure may be amended. The Commission may determine, after consultation with the country of destination, as appropriate, and in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, which of the procedures referred to in paragraph 2 of this Article shall apply.
5. The Commission shall, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, regularly review Annexes A and B of this Regulation, in order to bring them into line with the amendments made to the Annexes to Regulation (EEC) No 259/93.
Article 4
The control procedures established by this Regulation shall be subject to periodic review by the Commission and for the first time no later than nine months following its publication in the Official Journal, taking into account the experience gained. If the results of the review lead to the conclusion that it would be appropriate, the Commission may, without prejudice to the provisions of Article 3, make new proposals to the Council.
Article 5
The Commission, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, shall, as soon as possible, review and amend this Regulation in order to bring it into line with Regulation (EEC) No 259/93.
Article 6
This Regulation shall enter into force on the 90th day following that of its publication in the Official Journal of the European Communities.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 29 April 1999.
For the Council
The President
W. MÜLLER
(1) OJ C 214, 10.7.1998, p. 74.
(2) Opinion delivered on 29 April 1998 (OJ C 169, 16.6.1999).
(3) Opinion of the European Parliament of 17 July 1997 (OJ C 286, 22.9.1997, p. 23), Council common position of 4 June 1998 (OJ C 333, 30.10.1998, p. 1 ) and Decision of the European Parliament of 9 February 1999 (OJ C 250, 28.5.1999).
(4) OJ L 30, 6.2.1993, p. 1. Regulation as last amended by Regulation (EC) No 120/97 (OJ L 22, 24.1.1997, p.14).
(5) OJ L 220, 25.8.1994, p. 15.
(6) OJ L 377, 31.12.11, p. 20. Directive amended by Directive 94/31/EC (OJ L 168, 2.7.1994, p. 28).
(7) OJ L 194, 25.7.1975, p. 39. Directive as last amended by Commission Decision 96/350/EC (OJ L 135, 6.6.1996, p. 32).
ANNEX A
Countries and territories which have indicated to the Commission that they do not wish to receive shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93
ALBANIA
All types except:
1. In Section GA ("Metal and metal-alloy wastes in metallic, no-dispersible form"):
(a) the following ferrous waste and scrap of iron and steel:
>TABLE>
(b) the following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. All types included in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):
3. All types included in section GE ("Glass waste in non-dispersible form").
4. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"):
>TABLE>
5. All types in section GI ("Paper, paperboard and paper product wastes").
6. In section GJ ("Textile wastes"):
>TABLE>
ANDORRA
All types
ANTIGUA and BARBUDA
All types
ARUBA
All types
BAHAMAS
All types
BARBADOS
All types
BELIZE
All types
BHUTAN
All types
BOLIVIA
All types
BOTSWANA
All types
BRAZIL
All types except:
1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):
(a) the following ferrous waste and scrap of iron and steel:
>TABLE>
(b) the following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):
>TABLE>
3. In section GC ("Other wastes containing metals"
[...]
>TABLE>
4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form").
>TABLE>
5. In section GG ("Other wastes containing principally inorganic constituents, which mas contain metals and organic materials")
>TABLE>
6. In section GH ("Solid plastic wastes"):
>TABLE>
7. In section GJ ("Textile wastes")
>TABLE>
8. In section GK ("Rubber wastes"):
>TABLE>
9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):
>TABLE>
BULGARIA
All types except:
1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):
(a) The following waste and scrap of precious metals and their alloys:
>TABLE>
N.B.:
Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams
(b) The following ferrous waste and scrap of iron or steel:
>TABLE>
(c) The following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):
>TABLE>
3. In section GC ("Other wastes containing metals")
>TABLE>
4. In section GH ("Solid plastic wastes"):
>TABLE>
5. All types in section GI ("Paper, paperboard and paper product wastes").
BURKINA FASO
All types except:
All types in section GA ("Metal and metal-alloy wastes in metallic, non-disprsible(1) from")
CAMEROON
All types except:
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispesible form")
(a) The following waste and scrap of precious metals and their alloys:
>TABLE>
N.B.
Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams
(b) The following ferrous waste and scrap of iron or steel:
>TABLE>
2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")
>TABLE>
3. In section GC ("Other wastes containing metals")
>TABLE>
4. In section GE ("Glass waste in non-dispersible form")
>TABLE>
5. In section GF ("Ceramic wastes in non-dispersible form")
>TABLE>
6. In section GH ("Solid plastic wastes")
>TABLE>
7. All types in section GI ("Paper, paperboard and paper product wastes")
8. In section GJ ("Textile wastes")
>TABLE>
9. In section GK ("Rubber wastes")
>TABLE>
10. All types in section GL ("RUntreatea cork and waad wastes")
11. In section GM ("Woetes orisins from agro-food industries")
>TABLE>
CAPE VERDE
All types
COLOMBIA
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(2) form"):
All types of waste and scrap of non-ferrous metals and their alloys:
[...]
2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):
>TABLE>
3. In section GC ("Other wastes containing metals"):
>TABLE>
4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"):
>TABLE>
5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"):
>TABLE>
6. In section GH ("Solid plastic wastes"):
>TABLE>
7. In section GJ ("Textile wastes"):
>TABLE>
8. In section GK ("Rubber wastes"):
>TABLE>
9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):
>TABLE>
COMOROS, Federal Islamic republic
All types except:
In section GJ ("Textile wastes"):
>TABLE>
COSTA RICA
All types
DOMINICA
All types
DOMINICAN REPUBLIC
All types
DJIBOUTH
All types
EGYPT
All types except:
1. All types in section GA ("Metal and metal-alloy wastes in metallic non-dispersible form").
2. All types in section GI ("Paper, paperboard and paper product wastes").
3. All types in section GJ ("Textile wastes").
FIJI
All types
GAMBIA
All types except:In section GJ ("Textile wastes"):
>TABLE>
GHANA
All types
GRENADA
All types except:In section GK ("Rubber wastes"):
>TABLE>
GUYANA
All types
KIRIBATI
All types
KUWAIT
All types except:In section GH ("Solid plastic wastes"):
>TABLE>
LEBANON
All types except:In section GJ ("Textile wastes"):
>TABLE>
MALAWI
All types excepts:
1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form").
2. All types in section GE ("Glass waste in non-dispersible form").
3. All types in section GI ("Paper, paperboard and paper product wastes").
4. In section GJ ("Textile wastes"):
>TABLE>
MALDIVES
All types
MALI
1. In section GA ("Metal and metal-alloy wastes in metallic, non dispersible(3) form")
All types of waste and scrap of non-ferrous metals and their alloys.
2. All types in section GE ("Glass waste in non-dispersible form").
3. All types in section GF ("Ceramic wastes in non-dispersible form")
4. All types in section GH ("Solid plastic wastes")
5. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use")
MOLDOVA
All types
MONGOLIA
All types
MYANMAR
All types
NICRAGUA
All types
NIGER
All types except:
1. In section GJ ("Textile wastes")
>TABLE>
2. In section GK ("Rubber wastes")
>TABLE>
NIGERIA
All types except:All types in section GH ("Solid plastic wastes")
PAKISTAN
1. In section GK ("Rubber wastes"):
>TABLE>
2. In section GM ("Wastes arising from agro-food industries"):
>TABLE>
3. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"):
>TABLE>
PAPUA NEW GUINEA
All types
PARAGUAY
All types except:
1. All types included in section GI ("Paper, paperboard and paper product wastes")
2. In section GJ ("Textile wastes"):
>TABLE>
3. In section GL ("Untreated cork and wood wastes"):
>TABLE>
PERU
All types
SÃO TOME AND PRINCIPE
All types except:
1. In section GJ ("Textile wastes"):
>TABLE>
2. In section GK ("Rubber wastes"):
>TABLE>
SAUDIA ARABIA
All types
SENEGAL
All types
SEYCHELLES
All types
SINGAPORE
All types except:
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):
(a) The following waste and scrap of precious metals and their alloys:
>TABLE>
N.B.:
Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams
(b) the following ferrous waste and scrap of iron or steel:
>TABLE>
(c) the following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. In section GC ("Other wastes containing metals"):
>TABLE>
3. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"):
>TABLE>
4. In section GH ("Solid plastic wastes"):
>TABLE>
ST. KITTS AND NEVIS
All types
ST LUCIA
All types
ST VINCENT AND THE GRENADINES
All types
TANZANIA
All types except:In section GJ ("Textile wastes"):
>TABLE>
UGANDA
All types except:
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form")
>TABLE>
2. In section GJ ("Textile wastes")
>TABLE>
TUVALU
All types
VANUATU
All types
WESTERN SAMOA
All types
(1) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.
(2) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.
(3) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.
ANNEX B
Countries and territories which have not responded to the Commission's communications on shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93
AFGHANISTAN
All types
ALGERIA
All types
ANGOLA
All types except:
1. All types in section GA ("Metal and metal alloy wastes in metallic, non-dispersible form").
2. All types in section GE ("Glass wastes in non-dispersible form").
3. All types in section GI ("Paper, paperboard and paper product wastes").
4. All types in section GJ ("Textile wastes").
5. All types in section GK ("Rubber wastes").
ARMENIA
All types
AZERBAIJAN
All types
BAHRAIN
All types
BANGLADESH
All types
BRUNEI
All types
BURUNDI
All types
CAMBODIA
All types
ECUADOR
All types
EL SALVADOR
All types
EQUATORIAL GUINEA
All types
ERITREA
All types
ETHIOPIA
All types
FORMER YUGOSLAV REPUBLIC OF MACEDONIA
All types
GABON
All types
GUATEMALA
All types
GUINEA
All types except:
In section GJ ("Textile wastes"):
>TABLE>
HAITI
All types
HONDURAS
All types
IVORY COAST
All types
KAZAKHSTAN
All types
KYRGYSTAN
All types
LAOS
All types
LESOTHO
All types
MOROCCO
All types
MOZAMBIQUE
All types
NAMIBIA
All types
NEPAL
All types
OMAN
All types
PANAMA
All types
QATAR
All types
RUSSIAN FEDERATION
All types except:
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):
(a) The following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):
>TABLE>
3. In section GC ("Other wastes containing metals"):
>TABLE>
4. In section GD ("Waste from mining operations: these wastes to be in non-dispersible form"):
>TABLE>
5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic metals"):
>TABLE>
6. All types included in section GH ("Solid plastic wastes").
7. In section GJ ("Textile wastes"):
>TABLE>
8. All types included in section GK ("Rubber wastes").
9. In section GM ("Wastes arising from agro-food industries"):
>TABLE>
10. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"):
>TABLE>
11. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):
>TABLE>
SOLOMON ISLANDS
All types
SUDAN
All types
SWAZILAND
All types
SYRIA
All types
TAJIKISTAN
All types
TONGA
All types
TUNISIA
All types in Annex II except:
1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):
(a) The following ferrous waste and scrap of iron and steel:
>TABLE>
(b) The following waste and scrap of non-ferrous metals and their alloys:
>TABLE>
2. In section GC ("Other wastes containing metals"):
>TABLE>
3. All types in section GH ("Solid plastic wastes").
4. All types in section GI ("Paper, paperboard and paper product wastes").
5. In section GJ ("Textile wastes"):
>TABLE>
6. All types in section GK ("Rubber wastes").
7. In section GM ("Wastes arising from agro-food industries"):
>TABLE>
8. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")
>TABLE>
TURKMENISTAN
All types
UZBEKISTAN
All types
VATICAN CITY
All types
VENEZUELA
All types
VIETNAM
All types
YEMEN
All types
ZIMBABWE
All types