Commission Decision of 19 October 2009 amending Decisions 2006/679/EC and 2006/860/EC as regards technical specifications for interoperability relating to subsystems of the trans-European conventional and high-speed rail systems (notified under document C(2009) 7787) (Text with EEA relevance)
2006/679/EC • 32010D0079
Legal Acts - Directives
- Inbound citations: 8
- •
- Cited paragraphs: 0
- •
- Outbound citations: 10
10.2.2010
EN
Official Journal of the European Union
L 37/74
COMMISSION DECISION
of 19 October 2009
amending Decisions 2006/679/EC and 2006/860/EC as regards technical specifications for interoperability relating to subsystems of the trans-European conventional and high-speed rail systems
(notified under document C(2009) 7787)
(Text with EEA relevance)
(2010/79/EC)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (1), and in particular Article 6(1) thereof,
Having regard to the recommendation of the European Railway Agency (ERA-REC-38-2009-ERTMS) of 24 April 2009, on updating the Annex A of the TSI Control Command and Signalling for High Speed and Conventional Rail systems,
Whereas:
(1)
Commission Decision 2006/679/EC of 28 March 2006 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system (2) laid down the technical specification for interoperability (TSI) relating to the control-command and signalling subsystem of the trans-European conventional rail system.
(2)
Commission Decision 2006/860/EC of 7 November 2006 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system (3) laid down the TSI relating to the control-command and signalling subsystem of the trans-European high speed rail system.
(3)
In accordance with Article 2 of Commission Decision 2008/386/EC of 23 April 2008 modifying Annex A to Decision 2006/679/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system and Annex A to Decision 2006/860/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high-speed rail system (4), the ETCS specifications should be completed to include updated common test specifications.
(4)
A number of technical documents referred to in Annex A to Decisions 2006/679/EC and 2006/860/EC must be updated to adapt them to technical progress.
(5)
Decisions 2006/679/EC and 2006/860/EC should therefore be amended accordingly.
(6)
The measures provided for in this Decision are in accordance with the opinion of the Railway Interoperability and Safety Committee, established in accordance with Article 29 of Directive 2008/57/EC,
HAS ADOPTED THIS DECISION:
Article 1
The list of mandatory specifications and the list of informative specifications set out in Annex A to Decision 2006/679/EC and in Annex A to Decision 2006/860/EC, are replaced by the list of mandatory specifications and the list of informative specifications contained in the Annex to this Decision. The footnotes referring to Decision 2002/731/EC in Annex H to the TSI attached to Decision 2006/679/EC and in Annex H to the TSI attached to Decision 2006/860/EC are deleted.
Article 2
This Decision shall apply from 1 April 2010.
Article 3
This Decision is addressed to the Member States.
Done at Brussels, 19 October 2009.
For the Commission
Antonio TAJANI
Vice-President
(1) OJ L 191, 18.7.2008, p. 1.
(2) OJ L 284, 16.10.2006, p. 1.
(3) OJ L 342, 7.12.2006, p. 1.
(4) OJ L 136, 24.5.2008, p. 11.
ANNEX
LIST OF MANDATORY SPECIFICATIONS
Index No
Reference
Document name
Version
1
ERA/ERTMS/003204
ERTMS/ETCS Functional Requirement Specification
5.0
2
Intentionally deleted
3
UNISIG SUBSET-023
Glossary of Terms and Abbreviations
2.0.0
4
UNISIG SUBSET-026
System Requirement Specification
2.3.0
5
UNISIG SUBSET-027
FFFIS Juridical Recorder-Downloading Tool
2.3.0
6
UNISIG SUBSET-033
FIS for Man-Machine Interface
2.0.0
7
UNISIG SUBSET-034
FIS for the Train Interface
2.0.0
8
UNISIG SUBSET-035
Specific Transmission Module FFFIS
2.1.1
9
UNISIG SUBSET-036
FFFIS for Eurobalise
2.4.1
10
UNISIG SUBSET-037
Euroradio FIS
2.3.0
11
Reserved 05E537
Off line key management FIS
12
UNISIG SUBSET-039
FIS for the RBC/RBC Handover
2.3.0
13
UNISIG SUBSET-040
Dimensioning and Engineering rules
2.3.0
14
UNISIG SUBSET-041
Performance Requirements for Interoperability
2.1.0
15
ERA SUBSET-108
Interoperability-related consolidation on TSI Annex A documents
1.2.0
16
UNISIG SUBSET-044
FFFIS for Euroloop sub-system
2.3.0
17
Intentionally deleted
18
UNISIG SUBSET-046
Radio In-fill FFFS
2.0.0
19
UNISIG SUBSET-047
Track-side-Trainborne FIS for Radio In-Fill
2.0.0
20
UNISIG SUBSET-048
Trainborne FFFIS for Radio In-Fill
2.0.0
21
UNISIG SUBSET-049
Radio In-fill FIS with LEU/Interlocking
2.0.0
22
Intentionally deleted
23
UNISIG SUBSET-054
Assignment of Values to ETCS variables
2.0.0
24
Intentionally deleted
25
UNISIG SUBSET-056
STM FFFIS Safe Time Layer
2.2.0
26
UNISIG SUBSET-057
STM FFFIS Safe Link Layer
2.2.0
27
UNISIG SUBSET-091
Safety Requirements for the Technical Interoperability of ETCS in Levels 1 & 2
2.5.0
28
Reserved
Reliability — Availability Requirements
29
UNISIG SUBSET-102
Test specification for Interface ‘k’
1.0.0
30
Intentionally deleted
31
UNISIG SUBSET-094
UNISIG Functional Requirements for an On-board Reference Test Facility
2.0.2
32
EIRENE FRS
GSM-R Functional Requirements Specification
7
33
EIRENE SRS
GSM-R System Requirements Specification
15
34
A11T6001 12
(MORANE) Radio Transmission FFFIS for EuroRadio
12
35
ECC/DC(02)05
ECC Decision of 5 July 2002 on the designation and availability of frequency bands for railway purposes in the 876-880 and 921-925 MHz bands
36a
Intentionally deleted
36b
Intentionally deleted
36c
UNISIG SUBSET-074-2
FFFIS STM Test cases document
1.0.0
37a
Intentionally deleted
37b
UNISIG SUBSET-076-5-2
Test cases related to features
2.3.1
37c
UNISIG SUBSET-076-6-3
Test sequences
2.3.1
37d
UNISIG SUBSET-076-7
Scope of the test specifications
1.0.2
37e
Intentionally deleted
38
06E068
ETCS marker board definition
1.0
39
UNISIG SUBSET-092-1
ERTMS EuroRadio Conformance Requirements
2.3.0
40
UNISIG SUBSET-092-2
ERTMS EuroRadio Test cases Safety Layer
2.3.0
41
Reserved
UNISIG SUBSET 028
JRU Test Specification
42
Intentionally deleted
43
UNISIG SUBSET 085
Test Specification for Eurobalise FFFIS
2.2.2
44
Reserved
Odometry FIS
45
UNISIG SUBSET-101
Interface ‘K’ specification
1.0.0
46
UNISIG SUBSET-100
Interface ‘G’ specification
1.0.1
47
Reserved
Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System
48
Reserved
Test specification for mobile equipment GSM-R
49
UNISIG SUBSET-059
Performance requirements for STM
2.1.1
50
UNISIG SUBSET-103
Test specification for EUROLOOP
1.0.0
51
Reserved
Ergonomic aspects of the DMI
52
UNISIG SUBSET-058
FFFIS STM Application Layer
2.1.1
53
Reserved
AEIF-ETCS-Variables-Manual
AEIF-ETCS-Variables-Manual
54
Intentionally deleted
55
Reserved
Juridical recorder baseline requirements
56
Reserved
05E538
ERTMS Key Management Conformance Requirements
57
Reserved
UNISIG SUBSET-107
Requirements on pre-fitting of ERTMS on-board equipment
58
UNISIG SUBSET-097
Requirements for RBC-RBC Safe Communication Interface
1.1.0
59
Reserved
UNISIG SUBSET-105
Requirements on pre-fitting of ERTMS track side equipment
60
Reserved
UNISIG SUBSET-104
ETCS version management
61
Reserved
GSM-R version management
62
Reserved
UNISIG SUBSET-099
RBC-RBC Test specification for Safe Communication Interface
63
UNISIG SUBSET-098
RBC-RBC Safe Communication Interface
1.0.0
LIST OF INFORMATIVE SPECIFICATIONS
Type ‘1’ specifications represent the current state of the work for the preparation of a mandatory specification still ‘reserved’.
Type ‘2’ specifications give additional information, justifying the requirements in mandatory specifications and providing help for their application.
Index B32 is intended to ensure unique references in the Annex A documents. As this is used for editorial purposes and to support future changes of documents referred only, it is not classified as a ‘Type’ and not linked to a mandatory Annex A document.
Documents B25, B27, B28, B29 and B30 are applicable only for the GSM-R DMI. For the ETCS DMI only B34 applies.
Index No
Reference
Document name
Version
Type
B1
EEIG 02S126
RAM requirements (chapter 2 only)
6
2 (index 28)
B2
EEIG 97S066
Environmental conditions
5
2 (index A5)
B3
UNISIG SUBSET-074-1
Methodology for testing FFFIS STM
1.0.0
2 (index 36)
B4
EEIG 97E267
ODOMETER FFFIS
5
1 (index 44)
B5
O_2475
ERTMS GSM-R QoS Test Specification
1.0.0
2
B6
UNISIG SUBSET-038
Off-line Key Management FIS
2.1.9
1 (index 11)
B7
UNISIG SUBSET-074-3
FFFIS STM test specification traceability of test cases with Specific Transmission Module FFFIS
1.0.0
2 (index 36)
B8
UNISIG SUBSET-074-4
FFFIS STM Test Specification Traceability of testing the packets specified in the FFFIS STM Application Layer
1.0.0
2 (index 36)
B9
UNISIG SUBSET 076-0
ERTMS/ETCS Class 1, Test plan
2.3.1
2 (index 37)
B10
UNISIG SUBSET 076-2
Methodology to prepare features
2.3.0
2 (index 37)
B11
UNISIG SUBSET 076-3
Methodology of testing
2.3.1
2 (index 37)
B12
UNISIG SUBSET 076-4-1
Test sequence generation: Methodology and Rules
1.0.2
2 (index 37)
B13
UNISIG SUBSET 076-4-2
ERTMS ETCS Class 1 States for Test Sequences
1.0.2
2 (index 37)
B14
UNISIG SUBSET 076-5-3
On-Board Data Dictionary
2.3.0
2 (index 37)
B15
UNISIG SUBSET 076-5-4
SRS v.2.2.2 Traceability
2.3.1
2 (index 37)
B16
UNISIG SUBSET 076-6-1
UNISIG test data base
2.3.1
2 (index 37)
B17
UNISIG SUBSET 076-6-4
Test Cases Coverage
2.3.1
2 (index 37)
B18
Intentionally deleted
B19
UNISIG SUBSET 077
UNISIG Causal Analysis Process
2.2.2
2 (index 27)
B20
UNISIG SUBSET 078
RBC interface: Failure modes and effects analysis
2.4.0
2 (index 27)
B21
UNISIG SUBSET 079
MMI: Failure Modes and Effects Analysis
2.2.2
2 (index 27)
B22
UNISIG SUBSET 080
TIU: Failure Modes and Effects Analysis
2.2.2
2 (index 27)
B23
UNISIG SUBSET 081
Transmission system: Failure Modes and Effects Analysis
2.3.0
2 (index 27)
B24
UNISIG SUBSET 088
ETCS Application Levels 1 & 2 — Safety Analysis
2.3.0
2 (index 27)
B25
TS50459-1
Railway applications — European Rail Traffic Management System — Driver Machine Interface — part 1 — Ergonomic principles of ERTMS/ETCS/GSM-R Information
2005
2 (index 51)
B26
intentionally deleted
superseded by B34
B27
TS50459-3
Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 3 — Ergonomic arrangements of ERTMS/GSM-R Information
2005
2 (index 51)
B28
TS50459-4
Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 4 — Data entry for the ERTMS/ETCS/GSM-R systems
2005
2 (index 51)
B29
TS50459-5
Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 5 — Symbols
2005
2 (index 51)
B30
TS50459-6
Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 6 — Audible Information
2005
2 (index 51)
B31
Reserved
EN50xxx
Railway applications — European Rail Traffic Management System — Driver Machine Interface — part 7 — Specific Transmission Modules
2 (index 51)
B32
Reserved
Guideline for references
NoneB33
EN 301515
Global System for Mobile communication (GSM); Requirements for GSM operation in railways
2.1.0
2 (index 32, 33)
B34
ERA-ERTMS-015560
ERTMS/ETCS Driver Machine Interface
2.3
1 (index 51)
B35
Reserved
UNISIG SUBSET-069
ERTMS Key Management Conformance Requirements
1 (index 56)
B36
04E117
ETCS/GSM-R Quality of Service user requirements — Operational Analysis
1
2 (index 32)
B37
UNISIG SUBSET-093
GSM-R Interfaces — Class 1 requirements
2.3.0
1 (index 32, 33)
B38
UNISIG SUBSET-107A
Requirements on pre-fitting of ERTMS on-board equipment
1.0.0
2 (index 57)
B39
UNISIG SUBSET-076-5-1
ERTMS ETCS Class 1 Feature List
2.3.1
2 (index 37)
B40
UNISIG SUBSET-076-6-7
Test Sequences Evaluation and Validation
1.0.2
2 (index 37)
B41
UNISIG SUBSET-076-6-8
Generic train data for test Sequences
1.0.1
2 (index 37)
B42
UNISIG SUBSET-076-6-10
Test Sequence Viewer (TSV)
3.0.8
2 (index 37)
B43
04E083
Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System
1.0
1 (index 47)
B44
04E084
Justification Report for the Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System.
1.0
2 (index B43)
B45
ERA/ERTMS/003205
Traceability Of Changes To ETCS FRS
0.1
2 (index 1)
B46
UNISIG SUBSET-099
RBC-RBC Safe Communication Interface Test Specifications
1.0.0
1 (index 62)