Council Regulation (EC) No 1870/2006 of 11 December 2006 on trade in certain steel products between the Community and the Republic of Kazakhstan
1870/2006 • 32006R1870
Legal Acts - Regulations
- Inbound citations: 7
- •
- Cited paragraphs: 2
- •
- Outbound citations: 2
19.12.2006
EN
Official Journal of the European Union
L 360/1
COUNCIL REGULATION (EC) No 1870/2006
of 11 December 2006
on trade in certain steel products between the Community and the Republic of Kazakhstan
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 133 thereof,
Having regard to the Treaty of Accession of Bulgaria and Romania, and in particular Article 4(3) thereof,
Having regard to the Act of Accession of Bulgaria and Romania, and in particular Article 56 thereof,
Having regard to the proposal from the Commission,
Whereas:
(1)
Article 17(1) of the Partnership and Cooperation Agreement between the European Communities and their Member States, and the Republic of Kazakhstan (1) provides that trade in certain steel products are to be subject to a specific Agreement on quantitative arrangements.
(2)
The current Agreement between the European Community and the Government of the Republic of Kazakhstan on trade in certain steel products (2), concluded on 19 July 2005, will expire on 31 December 2006.
(3)
Preliminary discussions between the Parties indicate that both of them intend to conclude a new Agreement for 2007 and subsequent years.
(4)
Pending the signature and entry into force of the new Agreement, quantitative limits for 2007 should be established.
(5)
Given that the conditions that led to the fixing of the quantitative limits for 2006 remain in place, it is appropriate to set the quantitative limits for 2007 at the same level as for 2006.
(6)
It is necessary to provide the means to administer this regime within the Community in such a way as to facilitate the implementation of the new Agreement by envisaging as much as possible similar provisions.
(7)
It is necessary to ensure that the origin of the products in question is checked and appropriate methods of administrative cooperation are set up to this end.
(8)
Products placed in a free zone or imported under the arrangements governing customs warehouses, temporary importation or inward processing (suspension system) should not be counted against the limits established for the products in question.
(9)
The effective application of this Regulation calls for the introduction of a requirement for a Community import licence for the entry into free circulation in the Community of the products in question.
(10)
In order to ensure that these quantitative limits are not exceeded, it is necessary to establish a management procedure whereby the competent authorities of the Member States do not issue import licences before obtaining confirmation from the Commission that appropriate amounts remain available within the quantitative limit in question,
HAS ADOPTED THIS REGULATION:
Article 1
1. This Regulation shall apply from 1 January 2007 to 31 December 2007 to imports into the Community of steel products listed in Annex I originating in the Republic of Kazakhstan.
2. The steel products shall be classified in product groups as set out in Annex I.
3. The classification of products listed in Annex I shall be based on the Combined Nomenclature (CN) established by Council Regulation (EEC) No 2658/87 (3).
4. The origin of the products referred to in paragraph 1 shall be determined in accordance with the rules in force in the Community.
Article 2
1. The importation into the Community of the steel products listed in Annex I originating in the Republic of Kazakhstan shall be subject to the quantitative limits laid down in Annex V. The release for free circulation in the Community of the products set out in Annex I originating in the Republic of Kazakhstan shall be subject to the presentation of a certificate of origin, set out in Annex II, and of an import licence issued by the Member States' authorities in accordance with the provisions of Article 4.
2. In order to ensure that quantities for which import licences are issued do not exceed at any moment the total quantitative limits for each product group, the competent authorities listed in Annex IV shall issue import licences only upon confirmation by the Commission that there are still quantities available within the quantitative limits for the relevant product group of steel products in respect of the supplier country, for which an importer or importers have submitted applications to the said authorities.
3. The authorised imports shall be counted against the relevant quantitative limit set out in Annex V. Shipment of products shall be considered as having taken place on the date on which they were loaded onto the exporting means of transport.
Article 3
1. The quantitative limits referred to in Annex V shall not apply to products placed in a free zone or free warehouse or imported under the arrangements governing customs warehouses, temporary importation or inward processing (suspension system).
2. Where the products referred to in paragraph 1 are subsequently released for free circulation, either in the unaltered state or after working or processing, Article 2(2) shall apply and the products so released shall be counted against the relevant quantitative limit set out in Annex V.
Article 4
1. For the purpose of applying Article 2(2), before issuing import licences, the competent authorities of the Member States listed in Annex IV shall notify the Commission of the amounts of the requests for import licences, supported by original export licences, which they have received. By return, the Commission shall notify whether the requested amount(s) of quantities are available for importation in the chronological order in which the notifications of the Member States are received (‘first come, first served basis’).
2. The requests included in the notifications to the Commission shall be valid if they establish clearly in each case the exporting country, the product code concerned, the amounts to be imported, the number of the export licence, the quota year and the Member State in which the products are intended to be put into free circulation.
3. As far as possible, the Commission shall confirm to the authorities the full amount indicated in the requests notified for each group of products.
4. The competent authorities shall notify the Commission immediately after being informed of any quantity that is not used during the duration of validity of the import licence. Such unused quantities shall automatically be transferred into the remaining quantities of the total Community quantitative limit for each product group.
5. The notifications referred to in paragraphs 1 to 4 shall be communicated electronically within the integrated network set up for this purpose, unless, for imperative technical reasons, it is necessary to use other means of communication temporarily.
6. The import licences or equivalent documents shall be issued in accordance with Articles 12 to 16.
7. The competent authorities of the Member States shall notify the Commission of any cancellation of import licences or equivalent documents already issued in cases where the corresponding export licences have been withdrawn or cancelled by the competent authorities of the Republic of Kazakhstan. However, if the Commission or the competent authorities of a Member State have been informed by the competent authorities of the Republic of Kazakhstan of the withdrawal or cancellation of an export licence after the related products have been imported into the Community, the quantities in question shall be set off against the relevant quantitative limit set out in Annex V.
Article 5
1. Where the Commission has indications that products listed in Annex I originating in the Republic of Kazakhstan have been transhipped, rerouted or otherwise imported into the Community through circumvention of the quantitative limits referred to in Article 2 and that there is a need for the necessary adjustments to be made, it shall request that consultations be opened so that agreement may be reached on the necessary adjustment of the corresponding quantitative limits to be made.
2. Pending the outcome of the consultations referred to in paragraph 1, the Commission may ask the Republic of Kazakhstan to take the necessary precautionary steps to ensure that adjustments to the quantitative limits agreed following such consultations may be carried out.
3. Should the Community and the Republic of Kazakhstan fail to arrive at a satisfactory solution and should the Commission note that there is clear evidence of circumvention, the Commission shall deduct from the quantitative limits an equivalent volume of products originating in the Republic of Kazakhstan.
Article 6
Loading citations...1. An export licence (to be issued by the competent authorities of the Republic of Kazakhstan) shall be required in respect of any consignment of steel products subject to the quantitative limits laid down in Annex V up to the level of the said limits.
2. The original of the export licence shall be presented by the importer for the purposes of the issue of the import licence referred to in Article 12.
Article 7
1. The export licence for quantitative limits shall conform to the specimen set out in Annex II and shall certify, inter alia, that the quantity of goods in question has been set off against the quantitative limit established for the product group concerned.
2. Each export licence shall cover only one of the product groups listed in Annex I.
Article 8
Exports shall be set off against the relevant quantitative limits set out in Annex V and shipped within the meaning of Article 2(3).
Article 9
1. The export licence referred to in Article 6 may include additional copies duly indicated as such. The export licence and the copies thereof, as well as the certificate of origin and the copies, thereof, shall be drawn up in English.
2. If the documents referred to in paragraph 1 are completed by hand, entries must be in ink and in block letters.
3. The export licences or equivalent documents shall measure 210 × 297 mm. The paper shall be white writing paper, sized, not containing mechanical pulp and weighing not less than 25 g/m2. Each part shall have a printed guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.
4. Only the original shall be accepted by the competent authorities in the Community as being valid for import purposes in accordance with the provisions of this Regulation.
5. Each export licence or equivalent document shall bear a standardised serial number, whether or not printed, by which it can be identified.
6. The serial number shall be composed of the following elements:
—
two letters identifying the exporting country as follows:
KZ
=
Republic of Kazakhstan
—
two letters identifying the Member State of intended destination as follows:
BE
=
Belgium
BG
=
Bulgaria
CZ
=
Czech Republic
DK
=
Denmark
DE
=
Germany
EE
=
Estonia
EL
=
Greece
ES
=
Spain
FR
=
France
IE
=
Ireland
IT
=
Italy
CY
=
Cyprus
LV
=
Latvia
LT
=
Lithuania
LU
=
Luxembourg
HU
=
Hungary
MT
=
Malta
NL
=
Netherlands
AT
=
Austria
PL
=
Poland
PT
=
Portugal
RO
=
Romania
SI
=
Slovenia
SK
=
Slovakia
FI
=
Finland
SE
=
Sweden
GB
=
United Kingdom,
—
a one-digit number identifying the quota year corresponding to the last figure in the year in question, e.g. ‘7’ for 2007,
—
a two-digit number identifying the issuing office in the exporting country,
—
a five-digit number running consecutively from 00 001 to 99 999 allocated to the specific Member State of destination.
Article 10
The export licence may be issued after the shipment of the products to which it relates. In such cases it shall bear the endorsement ‘issued retrospectively’.
Article 11
In the event of the theft, loss or destruction of an export licence, the exporter may apply to the competent authority which issued the document for a duplicate to be made out on the basis of the export documents in his possession.
The duplicate licence issued in this way shall bear the endorsement ‘duplicate’. It shall bear the date of the original licence.
Article 12
1. To the extent that the Commission, pursuant to Article 4, has confirmed that the amount requested is available within the quantitative limit in question, the competent authorities of the Member States shall issue an import licence within a maximum of five working days of the presentation by the importer of the original of the corresponding export licence. This presentation must be effected not later than 31 March of the year following that in which the goods covered by the licence have been shipped. Import licences shall be issued by the competent authorities of any Member State irrespective of the Member State indicated on the export licence, to the extent that the Commission, pursuant to Article 4, has confirmed that the amount requested is available within the quantitative limit in question.
2. The import licences shall be valid for four months from the date of their issue. Upon duly motivated request by an importer, the competent authorities of a Member State may extend the duration of validity for a further period not exceeding four months.
3. Import licences shall be drawn up in the form set out in Annex III and shall be valid throughout the customs territory of the Community.
4. The declaration or request made by the importer in order to obtain the import licence shall contain:
(a)
the full name and address of the exporter;
(b)
the full name and address of the importer;
(c)
the exact description of the goods and the TARIC code(s);
(d)
the country of origin of the goods;
(e)
the country of consignment;
(f)
the appropriate product group and the quantity for the products in question;
(g)
the net weight by TARIC heading;
(h)
the c.i.f. value of the products at Community frontier by TARIC heading;
(i)
whether the products concerned are seconds or of substandard quality;
(j)
where appropriate, dates of payment and delivery and a copy of the bill of lading and of the purchase contract;
(k)
date and number of the export licence;
(l)
any internal code used for administrative purposes;
(m)
date and signature of importer.
5. Importers shall not be obliged to import the total quantity covered by an import licence in a single consignment.
Article 13
The validity of import licences issued by the authorities of the Member States shall be subject to the validity of export licences and the quantities indicated in the export licences issued by the competent authorities of the Republic of Kazakhstan on the basis of which the import licences have been issued.
Article 14
Import licences or equivalent documents shall be issued by the competent authorities of the Member States in conformity with Article 2(2) and without discrimination to any importer in the Community wherever the place of his establishment may be in the Community, without prejudice to compliance with other conditions required under the current rules.
Article 15
1. If the Commission finds that the total quantities covered by export licences issued by the Republic of Kazakhstan for a particular product group exceed the quantitative limit established for that product group, the competent licence authorities in the Member States shall be informed immediately in order to suspend the further issue of import licences. In this event, consultations shall be initiated forthwith by the Commission.
2. The competent authorities of a Member State shall refuse to issue import licences for products originating in the Republic of Kazakhstan which are not covered by export licenses issued in accordance with the provisions of Articles 6 to 11.
Article 16
1. The forms to be used by the competent authorities of the Member States for issuing the import licences referred to in Article 12 shall conform to the specimen of the import licence set out in Annex III.
2. Import licence forms and extracts thereof shall be drawn up in duplicate, one copy, marked ‘Holder's copy’ and bearing the number 1 to be issued to the applicant, and the other, marked ‘Copy for the issuing authority’ and bearing the number 2, to be kept by the authority issuing the licence. For administrative purposes the competent authorities may add additional copies to form 2.
3. Forms shall be printed on white paper free of mechanical pulp, dressed for writing and weighing between 55 and 65 g/m2. Their size shall be 210 × 297 mm; the type space between the lines shall be 4,24 mm (one sixth of an inch); the layout of the forms shall be followed precisely. Both sides of copy No 1, which is the licence itself, shall in addition have a red printed guilloche pattern background so as to reveal any falsification by mechanical or chemical means.
4. Member States shall be responsible for having the forms printed. The forms may also be printed by printers appointed by the Member State in which they are established. In the latter case, reference to the appointment by the Member State must appear on each form. Each form shall bear an identification of the printer's name and address or a mark enabling the printer to be identified.
5. At the time of their issue the import licences or extracts shall be given an issue number determined by the competent authorities of the Member State. The import licence number shall be notified to the Commission electronically within the integrated network set up under Article 4.
6. Licences and extracts shall be completed in the official language, or one of the official languages, of the Member State of issue.
7. In box 10 the competent authorities shall indicate the appropriate steel product group.
8. The marks of the issuing agencies and debiting authorities shall be applied by means of a stamp. However, an embossing press combined with letters or figures obtained by means of perforation, or printing on the licence may be substituted for the issuing authority's stamp. The issuing authorities shall use any tamper-proof method to record the quantity allocated in such a way as to make it impossible to insert figures or references.
9. The reverse of copy No 1 and copy No 2 shall bear a box in which quantities may be entered, either by the customs authorities when import formalities are completed, or by the competent administrative authorities when an extract is issued. If the space set aside for debits on a licence or extract thereof is insufficient, the competent authorities may attach one or more extension pages bearing boxes matching those on the reverse of copy No 1 and copy No 2 of the licence or extract. The debiting authorities shall place their stamp in such a way that one half is on the licence or extract thereof and the other half is on the extension page. If there is more than one extension page, a further stamp shall be placed in like manner across each page and the preceding page.
10. Import licences and extracts issued, and entries and endorsements made, by the authorities of one Member State shall have the same legal effect in each of the other Member States as documents issued, and entries and endorsements made, by the authorities of such Member States.
11. The competent authorities of the Member States concerned may, where indispensable, require the contents of licences or extracts to be translated into the official language or one or the official languages of that Member State.
Article 17
As regards release for free circulation in Bulgaria and Romania as of 1 January 2007 of the steel products covered by this Regulation, an import licence shall be required, even if the steel products have been shipped before that date. If the steel products are shipped to Bulgaria or Romania before 1 January 2007, the import licence shall be granted automatically without quantitative limitations on presentation of the bill of lading or another transport document deemed to be equivalent by the Community licensing offices proving the shipment date and after approval from the Commission's office responsible for the management of licences (SIGL). If the steel products are shipped to Bulgaria or Romania on 1 January or after that date, they shall be subject to the specific rules governing quantitative limits as defined in this Regulation.
Article 18
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. By derogation, Article 17 shall enter into force on the date of entry into force of the Treaty of Accession of Bulgaria and Romania to the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 11 December 2006.
For the Council
The President
E. TUOMIOJA
(1) OJ L 196, 28.7.1999, p. 3.
(2) OJ L 232, 8.9.2005, p. 64.
(3) OJ L 256, 7.9.1987, p. 1. Regulation as amended by Regulation (EC) No 1758/2006 (OJ L 335, 1.12.2006, p. 1).
ANNEX I
SA Flat-rolled products
SA1. Coils
7208100000
7208250000
7208260000
7208270000
7208360000
7208370010
7208370090
7208380010
7208380090
7208390010
7208390090
7211140010
7211190010
7219110000
7219121000
7219129000
7219131000
7219139000
7219141000
7219149000
7225301000
7225303010
7225309000
7225401510
7225502010
SA2. Heavy Plate
7208400010
7208512010
7208512091
7208512093
7208512097
7208512098
7208519100
7208519810
7208519891
7208519899
7208529100
7208521000
7208529900
7208531000
7211130000
SA3. Other flat rolled products
7208400090
7208539000
7208540000
7208908010
7209150000
7209161000
7209169000
7209171000
7209179000
7209181000
7209189100
7209189900
7209250000
7209261000
7209269000
7209271000
7209279000
7209281000
7209289000
7209908010
7210110010
7210122010
7210128010
7210200010
7210300010
7210410010
7210490010
7210500010
7210610010
7210690010
7210701010
7210708010
7210903010
7210904010
7210908091
7211140090
7211190090
7211232010
7211233010
7211233091
7211238010
7211238091
7211290010
7211908010
7212101000
7212109011
7212200011
7212300011
7212402010
7212402091
7212408011
7212502011
7212503011
7212504011
7212506111
7212506911
7212509013
7212600011
7212600091
7219211000
7219219000
7219221000
7219229000
7219230000
7219240000
7219310000
7219321000
7219329000
7219331000
7219339000
7219341000
7219349000
7219351000
7219359000
7225401290
7225409000
ANNEX II
ANNEX III
ANNEX IV
LISTA DE LAS AUTORIDADES NACIONALES COMPETENTES
SEZNAM PŘÍSLUŠNÝCH VNITROSTÁTNÍCH ORGÁNŮ
LISTE OVER KOMPETENTE NATIONALE MYNDIGHEDER
LISTE DER ZUSTÄNDIGEN BEHÖRDEN DER MITGLIEDSTAATEN
PÄDEVATE RIIKLIKE ASUTUSTE NIMEKIRI
ΔΙΕΥΘΥΝΣΕΙΣ ΤΩΝ ΑΡΧΩΝ ΕΚΔΟΣΗΣ ΑΔΕΙΩΝ ΤΩΝ ΚΡΑΤΩΝ ΜΕΛΩΝ
LIST OF THE COMPETENT NATIONAL AUTHORITIES
LISTE DES AUTORITÉS NATIONALES COMPÉTENTES
ELENCO DELLE COMPETENTI AUTORITA NAZIONALI
VALSTU KOMPETENTO IESTĀŽU SARAKSTS
ATSAKINGŲ NACIONALINIŲ INSTITUCIJŲ SĄRAŠAS
AZ ILLETÉKES NEMZETI HATÓSÁGOK LISTÁJA
LISTA TA' L-AWTORITAJIET KOMPETENTI NAZZJONALI
LIJST VAN BEVOEGDE NATIONALE INSTANTIES
LISTA WŁAŚCIWYCH ORGANÓW KRAJOWYCH
LISTA DAS AUTORIDADES NACIONAIS COMPETENTES
ZOZNAM PRÍSLUŠNÝCH ŠTÁTNYCH ORGÁNOV
SEZNAM PRISTOJNIH NACIONALNIH ORGANOV
LUETTELO TOIMIVALTAISISTA KANSALLISISTA VIRANOMAISISTA
FÖRTECKNING ÖVER BEHÖRIGA NATIONELLA MYNDIGHETER
BELGIQUE/BELGIË
Service public fédéral économie, PME, classes moyennes & énergie
Administration du potentiel économique
Service licences
Rue de Louvain 44
B-1000 Bruxelles
Fax (32-2) 548 65 70
Federale Overheidsdienst Economie, kmo, Middenstand en Energie
Bestuur Economisch Potentieel
Dienst Vergunningen
Leuvenseweg 44
B-1000 Brussel
Fax (32-2) 548 65 70
БЪЛГАРИЯ
Министерство на икономиката и енергетиката
Дирекция ‘Регистриране, лицензиране и контрол’
ул. ‘Славянска’ № 8
1052 София
Факс: +35929815041
(Fax)
+35929804710
+35929883654
ČESKÁ REPUBLIKA
Ministerstvo průmyslu a obchodu
Licenční správa
Na Františku 32
CZ-110 15 Praha 1
Fax: (420) 224 21 21 33
DANMARK
Erhvervs- og Byggestyrelsen
Økonomi- og Erhvervsministeriet
Langelinie Allé 17
DK-2100 København Ø
Fax (45) 35 46 60 29
DEUTSCHLAND
Bundesamt für Wirtschaft und Ausfuhrkontrolle
(BAFA) — Referat 421
Frankfurter Straße 29—35
D-65760 Eschborn
Fax (49-6196) 90 88 00
EESTI
Majandus- ja Kommunikatsiooniministeerium
Harju 11
EE-15072 Tallinn
Faks: (+372) 631 3660
ΕΛΛΑΔΑ
Υπουργείο Οικονομίας & Οικονομικών
Γενική Διεύθυνση Διεθνούς Οικονομικής Πολιτικής
Διεύθυνση Καθεστώτων Εισαγωγών-Εξαγωγών, Εμπορικής Άμυνας
Κορνάρου 1
GR-105 63 Αθήνα
Φαξ (30) 210-328 60 94
ESPAÑA
Ministerio de Industria, Turismo y Comercio
Secretaría General de Comercio Exterior
Subdirección General de Comercio Exterior de Productos Industriales
Paseo de la Castellana, 162
E-28046 Madrid
Fax (34) 913 49 38 31
FRANCE
Ministère de l'économie, des finances et de l'industrie
Direction générale des entreprises
Sous-direction des biens de consommation
Bureau textile-importations
Le Bervil, 12 rue Villiot
F-75572 Paris Cedex 12
Fax (33-1) 53 44 91 81
IRELAND
Department of Enterprise, Trade and Employment
Import/Export Licensing, Block C
Earlsfort Centre
Hatch Street
Dublin 2
Ireland
Fax (353-1) 631 25 62
ITALIA
Ministero delle Attività produttive
Direzione generale per la politica commerciale e per la gestione del regime degli scambi
Viale America 341
I-00144 Roma
Fax (39-06) 59 93 22 35/59 93 26 36
KYΠPOΣ
Υπουργείο Εμπορίου, Βιομηχανίας και Τουρισμού
Υπηρεσία Εμπορίου
Μονάδα Έκδοσης Αδειών Εισαγωγής/Εξαγωγής
Οδός Ανδρέα Αραούζου αρ. 6
CY-1421 Λευκωσία
Φαξ (357) 22-37 51 20
LATVIJA
Latvijas Republikas Ekonomikas ministrija
Brīvības iela 55
LV-1519 Rīga
Fax: + 371-728 08 82
LIETUVA
Lietuvos Respublikos ūkio ministerija
Prekybos departamentas
Gedimino pr. 38/2
LT-01104 Vilnius
Faksas (370-5) 262 39 74
LUXEMBOURG
Ministère de l'économie et du commerce extérieur
Office des licences
BP 113
L-2011 Luxembourg
Fax (352) 46 61 38
MAGYARORSZÁG
Magyar Kereskedelmi Engedélyezési Hivatal
Margit krt. 85.
HU-1024 Budapest
Fax: + 36-1-336 73 02
MALTA
Servizzi ta' Kummerċ
Diviżjoni għall-Kummerċ
Lascaris
MT-Valletta CMR02
Fax: + 356-21-23 19 19
NEDERLAND
Belastingdienst/Douane centrale dienst voor in- en uitvoer
Postbus 30003, Engelse Kamp 2
9700 RD Groningen
Nederland
Fax (31-50) 523 22 10
ÖSTERREICH
Bundesministerium für Wirtschaft und Arbeit
Außenwirtschaftsadministration
Abteilung C2/2
Stubenring 1
A-1011 Wien
Fax (43-1) 7 11 00-83 86
POLSKA
Ministerstwo Gospodarki
Plac Trzech Krzyży 3/5
PL-00-507 Warszawa
Faks: (48-22) 693 40 21/693 40 22
PORTUGAL
Ministério das Finanças
Direcção-Geral das Alfândegas e dos Impostos
Especiais sobre o Consumo
Rua Terreiro do Trigo, Edifício da Alfândega de Lisboa
PT-1140-060 Lisboa
Fax: (351) 21 881 42 61
ROMÂNIA
Ministerul Economiei și Comerțului
Direcția Generală Politici Comerciale
Str. Ion Câmpineanu, nr. 16
București, sect. 1
Cod poștal 010036
Tel.: 0040.21.315.00.81
Fax: 0040.21.315.04.54
e-mail: clc@dce.gov.ro
SLOVENIJA
Ministrstvo za finance
Carinska uprava Republike Slovenije
Carinski urad Jesenice
Center za TARIC in kvote
Spodnji Plavž 6c
SI-4270 Jesenice
Faks: (386-4) 297 44 72
SLOVENSKÁ REPUBLIKA
Ministerstvo hospodárstva SR
Odbor licencií
Mierová 19
827 15 Bratislava 212
Slovenská republika
Fax: (421-2) 43 42 39 19
SUOMI/FINLAND
Tullihallitus
PL 512
FI-00101 Helsinki
Faksi (358-20) 492 28 52
Tullstyrelsen
PB 512
FI-00101 Helsingfors
Fax (358-20) 492 28 52
SVERIGE
Kommerskollegium
Box 6803
S-113 86 Stockholm
Fax (46-8) 30 67 59
UNITED KINGDOM
Department of Trade and Industry
Import Licensing Branch
Queensway House — West Precinct
Billingham
TS23 2NF
United Kingdom
Fax (44-1642) 36 42 69
ANNEX V
QUANTITATIVE LIMITS
(tonnes)
Products
Year 2007
SA. Flat products
SA1. Coils
87 125
SA2. Heavy plate
0
SA3. Other flat products
117 875