Avis juridique important

Commission Regulation (EC) No 1081/96 of 14 June 1996 establishing a reference method for the detection of cows' milk and caseinate in cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk and repealing Regulation (EEC) No 690/92 Official Journal L 142 , 15/06/1996 P. 0015 - 0025

COMMISSION REGULATION (EC) No 1081/96 of 14 June 1996 establishing a reference method for the detection of cows' milk and caseinate in cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk and repealing Regulation (EEC) No 690/92 THE COMMISSION OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Community, Having regard to Council Regulation No 804/68 of 27 June 1968 on the common organization of the market in milk and milk products (1), as last amended by Regulation (EC) No 2931/95 (2), and in particular Article 9 (3), Article 16 (1) and (4) and Article 17 (14) thereof, Whereas aid for private storage of cheeses made from ewes' milk can be granted under Council Regulation (EEC) No 508/71 of 8 March 1971 laying down general rules on private storage aid for long-keeping cheeses (3); whereas a special refund for these same products can be decided under Article 17 of Regulation (EEC) No 804/68; whereas the import of cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk into the Community under preferential arrangements from certain third countries is foreseen; Whereas, in view of the existence of the abovementioned provisions concerning cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk, it is necessary to verify by appropriate controls that no cows' milk has been incorporated into the products concerned; whereas it is appropriate to establish a Community reference method for the detection of cows' milk, without prejudice to the use of routine methods, if they comply with certain criteria; Whereas a reference method applicable for cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk replaces the reference method described in Commission Regulation (EEC) No 690/92 (4), which can therefore be repealed; Whereas the measures provided for in this Regulation are in accordance with the opinion of the Management Committee for Milk and Milk Products, HAS ADOPTED THIS REGULATION: Article 1 The reference method of analysis figuring in the Annex shall be applied to ensure that cheese which must be made exclusively from ewes' milk, goats' milk or buffalos' milk or from a mixture of ewes', goats' and buffalos' milk does not in fact contain cows' milk casein. Cows' milk casein shall be held to be present, if the apparent cows' milk casein content of the sample to be analysed is equal to or higher than the content of the reference sample containing 1 % cows' milk described in the Annex. Article 2 Routine methods for the detection of cows' milk casein in cheeses referred to in Article 1 may be used under the following conditions: - the detection limit must be 0,5 % or lower, - false-positive results must not occur. If this cannot be excluded, any sample giving a positive result has to be analysed using the reference method, - cows' milk casein must be detectable with the required sensitivity even after long ripening periods, as may occur under usual commercial conditions. If this requirement is not fulfilled for a certain type of cheese referred to in Article 1, that cheese must be analysed using the reference method. Article 3 Regulation (EEC) No 690/92 is repealed. References to Regulation (EEC) No 690/92 shall be understood as references to the present Regulation. Article 4 This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Communities. It shall apply from 1 October 1996. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 14 June 1996. For the Commission Franz FISCHLER Member of the Commission (1) OJ No L 148, 28. 6. 1968, p. 13. (2) OJ No L 307, 20. 12. 1995, p. 10. (3) OJ No L 58, 11. 3. 1971, p. 1. (4) OJ No L 74, 20. 3. 1992, p. 23. ANNEX REFERENCE METHOD FOR THE DETECTION OF COWS' MILK AND CASEINATE IN CHEESES FROM EWES' MILK, GOATS' MILK OR BUFFALOS' MILK OR MIXTURES OF EWES', GOATS' AND BUFFALOS' MILK 1. Scope Detection of cows' milk and caseinate in cheeses made from ewes' milk, goats' milk, buffalos' milk or mixtures of ewes', goats' and buffalos' milk by isoelectric focusing of ã-caseins after plasminolysis. 2. Field of application The method is suitable for sensitive and specific detection of native and heat-treated cows' milk and caseinate in fresh and ripened cheeses made from ewes' milk, goats' milk, buffalos' milk or mixtures of ewes', goats' and buffalos' milk. It is not suitable for the detection of milk and cheese adulteration by heat-treated bovine whey protein concentrates. 3. Principle of the method 3.1. Isolation of caseins from cheese and the reference standards. 3.2. Dissolving of the isolated caseins and submitting to plasmin (EC.3.4.21.7) cleavage. 3.3. Isoelectric focusing of plasmin-treated caseins in the presence of urea and staining of proteins. 3.4. Evaluation of stained ã3 and ã2-casein patterns (evidence of cows' milk) by comparison of the pattern obtained from the sample with those obtained in the same gel from the reference standards containing 0 % and 1 % cows' milk. 4. Reagents Unless otherwise indicated, analytical grade chemicals must be used. Water must be double-distilled or of equivalent purity. Note: The following details apply to laboratory prepared polyacrylamide gels containing urea, of dimensions 265 × 125 × 0,25 mm. Where other sizes and types of gel are used, the separation conditions may have to be adjusted. Isoelectric focusing 4.1. Reagents for production of the urea containing polyacrylamide gels 4.1.1. Stock gel solution Dissolve: 4,85 g acrylamide 0,15g N, N'-methylene-bis-acrylamide (BIS) 48,05 g urea 15,00 g glycerol (87 % w/w), in water and make up to 100 ml and store in a brown glass bottle in the refrigerator. Note: A commercially available preblended acrylamide/BIS solution can be used in preference to the quoted fixed weights of the neurotoxic acrylamides. Where such a solution contains 30 % w/v acrylamide and 0,8 % w/v BIS, a volume of 16,2 ml must be used for the formulation instead of the fixed weights. The shelf life of the stock solution is a maximum of 10 days; if its conductivity is more than 5 ìS, de-ionize by stirring with 2 g Amberlite MB-3 for 30 minutes, then filter through a 0,45 ìm membrane. 4.1.2. Gel solution Prepare a gel solution by mixing additives and ampholytes with the stock gel solution (see 4.1.1). 9,0 ml stock solution 24 mg ß-alanine 500 ìl ampholyte pH 3,5 - 9,5 (1) 250 ìl ampholyte pH 5-7 (2) 250 ìl ampholyte pH 6-8 (3). Mix the gel solution and de-gas for two to three minutes in an ultrasonic bath or in vacuo. Note: Prepare the gel solution immediately prior to pouring it (see 6.2). 4.1.3. Catalyst solutions 4.1.3.1. N, N, N' N' - tetramethylethylenediamine (Temed). 4.1.3.2. 40 % w/v ammonium persulphate (PER): Dissolve 800 mg PER in water and make up to 2 ml. Note: Always use freshly prepared PER solution. 4.2. Contact fluid Kerosene or liquid paraffin 4.3. Anode solution Dissolve 5,77 g phosphoric acid (85 % w/w) in water and dilute to 100 ml. 4.4. Cathode solution Dissolve 2,00 g sodium hydroxide in water and dilute to 100 ml with water. Sample preparation 4.5. Reagents for protein isolation 4.5.1. Dilute acetic acid (25,0 ml of glacial acetic acid made up to 100 ml with water) 4.5.2. Dichloromethane 4.5.3. Acetone 4.6. Protein dissolving buffer Dissolve 5,75 g glycerol (87 % w/w) 24,03 g urea 250 mg dithiothreitol, in water and make up to 50 ml Note: Store in a refrigerator, maximum shelf-life one week. 4.7. Reagents for plasmin cleavage of caseins 4.7.1. Ammonium carbonate buffer Titrate a 0,2 mol/l ammonium hydrogencarbonate solution (1,58 g/100 ml water) containing 0,05 mol/l ethylenediaminetetraacetic acid (EDTA, 1,46 g/100 ml), with a 0,2 mol/l ammonium carbonate solution (1,92 g/100 ml water) containing 0,05 mol/l EDTA to ph 8. 4.7.2. Bovine plasmin (EC. 3.4.21.7), activity at least 5 U/ml. 4.7.3. å-Aminocaproic acid solution for enzyme inhibition Dissolve 2,624 g å-aminocaproic acid (6 amino-n-hexanoic acid) in 100 ml of 40 % (v/v) ethanol. 4.8. Standards 4.8.1. Certified reference standards of a mixture of renneted ewes' and goats' skimmed milk containing 0 % and 1 % of cows' milk are available from the Commission's Institute for Reference Materials and Measurements, B-2440 Geel, Belgium. 4.8.2. Preparation of laboratory interim-standards of buffalos' renneted milk containing 0 % and 1 % of cows' milk Skimmed milk is prepared by centrifuging of either buffalo or bovine raw bulk milk at 37 °C at 2 500 g for 20 minutes. After cooling the tube and contents rapidly to 6 to 8 °C, the upper fat layer is removed completely. For the preparation of the 1 % standard add 5,00 ml of bovine skimmed milk to a 495 ml of buffalos' skimmed milk in a 1 l beaker, adjust the pH to 6,4 by the addition of dilute lactic acid (10 % w/v). Adjust the temperature to 35 °C and add 100 ìl of calf rennet (rennet activity 1: 10 000, c. 3 000 U/ml), stir for 1 minute and then leave the beaker covered with an aluminium foil at 35 °C for one hour to allow formation of the curd. After the curd has formed, the whole renneted milk is freeze-dried without prior homogenization or draining of the whey. After freeze-drying it is finely ground to produce a homogeneous powder. For the preparation of the 0 % standard, carry out the same procedure using genuine buffalo skimmed milk. The standards must be stored at - 20 °C. Note: It is advisable to check the purity of the buffalos' milk by isoelectric focusing of the plasmin-treated caseins before preparation of the standards. Reagents for protein staining 4.9. Fixative Dissolve 150 g trichloroacetic acid in water and make up to 1 000 ml. 4.10. Destaining solution Dilute 500 ml methanol and 200 ml glacial acetic acid to 2 000 ml with distilled water. Note: Prepare the destaining solution fresh every day; it can be prepared by mixing equal volumes of stock solutions of 50 % (v/v) methanol and 20 % (v/v) glacial acetic acid. 4.11. Staining solutions 4.11.1. Staining solution (stock solution 1) Dissolve 3,0 g Coomassie Brilliant Blue G-250 (C.I. 42655) in 1 000 ml 90 % (v/v) methanol using a magnetic stirrer (approximately 45 minutes), filter through two medium-speed folded filters. 4.11.2. Staining solution (stock solution 2) Dissolve 5,0 g copper sulphate pentahydrate in 1 000 ml 20 % (v/v) acetic acid. 4.11.3. Staining solution (working solution) Mix together 125 ml of each of the stock solutions (4.11.1, 4.11.2) immediately prior to staining. Note: The staining solution should be prepared on the day that it is used. 5. Equipment 5.1. Glass plates (265 × 125 × 4 mm); rubber roller (width 15 cm); levelling table 5.2. Gel carrier sheet (265 × 125 mm). 5.3. Covering sheet (280 × 125 mm). Stick on strip of adhesive tape (280 × 6 × 0,25 mm) to each long edge (see Figure 1). 5.4. Electrofocusing chamber with cooling plate (e.g. 265 × 125 mm) and suitable power supply (≥ 2,5 kV) or automatic electrophoresis device. 5.5. Circulation cryostat, thermostatically controlled at 12 ± 0,5 °C. 5.6. Centrifuge, adjustable to 3 000 g. 5.7. Electrode strips (≥ 265 mm long). 5.8. Plastic dropping bottles for the anode and cathode solutions. 5.9. Sample applicators (10 × 5 mm, viscose or low protein-absorption filter paper). 5.10. Stainless steel scissors, scalpels and tweezers. 5.11. Stainless steel or glass staining and destaining dishes (e.g. 280 × 150 mm instrument trays). 5.12. Adjustable rod homogenizer (10 mm shaft diameter), rpm range 8 000 to 20 000. 5.13. Magnetic stirrer. 5.14. Ultrasonic bath. 5.15. Film welder. 5.16. 25 ìl micropipettes. 5.17. Vacuum concentrator or freeze-dryer. 5.18. Thermostatically controlled water bath adjustable to 35 and 40 ± 1 °C with shaker. 5.19. Densitometer equipment reading at ë = 634 nm. 6. Procedure 6.1. Sample preparation 6.1.1. Isolation of caseins Weigh the amount equivalent to 5 g dry mass of cheese or the reference standards into a 100 ml centrifuge tube, add 60 distilled water and homogenize with a rod homogenizer (8 000 to 10 000 rpm). Adjust to pH 4,6 with dil. acetic acid (4.5.1) and centrifuge (5 minutes, 3 000 g). Decant the fat and whey, homogenize the residue at 20 000 rpm in 40 ml distilled water adjusted to pH 4,5 with dil. acetic acid (4.5.1), add 20 ml dichloromethane (4.5.2), homogenize again and centrifuge (5 minutes, 3 000 g). Remove the casein layer that lies between the aqueous and organic phases (see Figure 2) with a spatula and decant off both phases. Rehomogenize the casein in 40 ml distilled water (see above) and 20 ml dichloromethane (4.5.2) and centrifuge. Repeat this procedure until both extraction phases are colourless (two to three times). Homogenize the protein residue with 50 ml acetone (4.5.3) and filter through a medium-speed folded filter paper. Wash the residue on the filter with two separate 25 ml portions of acetone each time and allow to dry in the air or a stream of nitrogen, then pulverize finely in a mortar. Note: Dry casein isolates should be kept at -20 °C. 6.1.2. Plasmin cleavage of ß-caseins to intensify ã-caseins Disperse 25 mg of isolated caseins (6.1.1) in 0,5 ml ammonium carbonate buffer (4.7.1) and homogenize for 20 minutes by e.g. using ultrasonic treatment. Heat to 40 °C and add 10 ìl plasmin (4.7.2), mix and incubate for one hour at 40 °C with continuous shaking. To inhibit the enzyme add 20 ìl å-aminocaproic acid solution (4.7.3), then add 200 mg of solid urea and 2 mg of dithiothreitol. Note: To obtain more symmetry in the focused casein bands it is advisable to freeze-dry the solution after adding the å-aminocaproic acid and then dissolving the residues in 0,5 ml protein dissolving buffer (4.6). 6.2. Preparation of the urea containing polyacrylamide gels With the aid of a few drops of water roll the gel carrier sheet (5.2) onto a glass plate (5.1), removing any extraneous water with paper towel or tissue. Roll the cover sheet (5.3) with spacers (0,25 mm) onto another glass plate in the same way. Lay the plate horizontally on a levelling table. Add 10 ìl Temed (4.1.3.1) to the prepared and de-aerated gel solution (4.1.2), stir and add 10 ìl PER-solution (4.1.3.2), mix thoroughly and immediately pour out evenly onto the centre of the cover sheet. Place one edge of the gel carrier plate (sheet side down) on the cover sheet plate and lower it slowly so that a gel film forms between the sheets and spreads out regularly and free of bubbles (Figure 3). Carefully lower the gel carrier plate completely using a thin spatula and place three more glass plates on top of it to act as weights. After polymerization is complete (about 60 minutes) remove the gel polymerized onto the gel carrier sheet along with the cover sheet by tipping the glass plates. Clean the reverse of the carrier sheet carefully to remove gel residues and urea. Weld the gel sandwich into a film tube and store in a refrigerator (maximum six weeks). Note: The cover sheet with the spacers can be re-used. The polyacrylamide gel can be cut to smaller sizes, recommended when there are few samples or if an automatic electrophoresis device is used (two gels, size 4,5 × 5 cm). 6.3. Isoelectric focusing Set the cooling thermostat to 12 °C. Wipe off the reverse of the gel carrier sheet with kerosene, then drip a few drops of kerosene (4.2) onto the centre of the cooling block. Then roll the gel sandwich, carrier side down, onto it, taking care to avoid bubbles. Wipe off any excess kerosene and remove the cover sheet. Soak the electrode strips with the electrode solutions (4.3, 4.4), cut to gel length and place in the positions provided (distance of electrodes 9,5 cm). Conditions for isoelectric focusing: 6.3.1. Gel size 265 × 125 × 0,25 mm >TABLE> Note: If thickness or width of the gels are changed, the values for current and power have to be suitably adjusted (e.g. double the values for electric current and power if a 265 × 125 × 0,5 mm gel is used). 6.3.2. Example of a voltage programme for an automatic electrophoresis device (2 gels of 5,0 × 4,5 cm), electrodes without strips applied directly to the gel. >TABLE> Place sample applicator in step 2 at 0 Vh. Remove sample applicator in step 2 at 30 Vh. 6.4. Protein staining 6.4.1. Protein fixation Remove the electrode strips immediately after turning off the power and put the gel immediately into a staining / destaining dish filled with 200 ml fixative (4.9); leave for 15 minutes, shaking continuously. 6.4.2. Washing and staining the gel plate Thoroughly drain off the fixative and wash the gel plate twice for 30 seconds each time with 100 ml destaining solution (4.10). Pour off the destaining solution and fill the dish with 250 ml staining solution (4.11.3); allow to stain for 45 minutes with gentle shaking. 6.4.3. Destaining the gel plate Pour off the staining solution, wash the gel plate twice using a 100 ml destaining solution (4.10) each time, then shake with 200 ml destaining solution for 15 minutes and repeat the destaining step at least two or three times until the background is clear and uncoloured. Then rinse the gel plate with distilled water (2 × 2 minutes) and dry in the air (2 to 3 hours) or with a hairdryer (10 to 15 minutes). Note 1: Carry out fixing, washing, staining and destaining at 20 °C. Do not use elevated temperatures. Note 2: If more sensitive silver staining (e.g. Silver Staining Kit, Protein, Pharmacia Biotech, Code No 17-1150-01) is preferred, plasmin-treated casein samples have to be diluted to 5 mg/ml. 7. Evaluation Evaluation is performed by comparing the protein patterns of the unknown sample with reference standards on the same gel. Detection of cows' milk in cheeses from ewes' milk, goats' milk and buffalos' milk and mixtures of ewes', goats' and buffalos' milk is done via the ã3- and ã2-caseins, whose isoelectric points range between pH 6,5 and pH 7,5 (Figures 4 a, b, Figure 5). The detection limit is less than 0,5 %. 7.1. Visual estimation For visual evaluation of the amount of bovine milk it is advisable to adjust the concentrations of samples and standards to obtain the same level of intensity of the ovine, caprine and/or buffalo ã2- and ã3-caseins (see 'ã2 E,G,B` and 'ã3 E,G,B` in figures 4 a, b and Figure 5). After which the amount of bovine milk (less than, equal to or greater than 1 %) in the unknown sample can be judged directly by comparing the intensity of the bovine ã3- and ã2-caseins (see 'ã3 C` and 'ã2 C` in Figures 4 a, b and Figure 5) to those of the 0 % and 1 % reference standards (ewe, goat) or, laboratory interim-standards (buffalo). 7.2. Densitometric estimation If available, apply densitometry (5.19) for the determination of the peak area ratio of bovine to ovine, caprine and/or buffalo ã2- and ã3-caseins (see Figure 5). Compare this value to ã2- and ã3-casein peak area ratio of the 1 % reference standard (ewe, goat) or laboratory interim-standard (buffalo) analysed on the same gel. Note: The method is operating satisfactorily, if there is a clear positive signal for both bovine ã2- and ã3-caseins in the 1 % reference standard but not in the 0 % reference standard. If not, optimize the procedure following the details of the method precisely. A sample is judged as being positive, if both bovine ã2- and ã3-caseins or the corresponding peak area ratios are equal to or greater than the level of the 1 % reference standard. 8. References 1. Addeo F., Moio L., Chianese L., Stingo C., Resmini P., Berner I., Krause I., Di Luccia A., Bocca A.: Use of plasmin to increase the sensitivity of the detection of bovine milk in ovine and/or caprine cheese by gel isoelectric focusing of ã2-caseins. Milchwissenschaft 45, 708-711 (1990). 2. Addeo F., Nicolai M.A., Chianese L., Moio L., Spagna Musso S., Bocca A., Del Giovine L.: A control method to detect bovine milk in ewe and water buffalo cheese using immunoblotting. Milchwissenschaft 50, 83-85 (1995). 3. Krause I., Berner I., Klostermeyer H.: Sensitive detection of cow milk in ewe and goat milk and cheese by carrier ampholyte - and carrier ampholyte/immobilized pH gradient - isoelectric focusing of ã-caseins using plasmin as signal amplifier. in: Electrophoresis-Forum 89 (B. J. Radola, ed.) pp 389-393, Bode-Verlag, München (1989). 4. Krause I., Belitz H.-D., Kaiser K.-P.: Nachweis von Kuhmilch in Schaf- und Ziegenmilch bzw. -käse durch isoelektrische Fokussierung in harnstoffhaligen Polyacrylamidgelen. Z. Lebensm. Unters. Forsch. 174, 195-199 (1982). 5. Radola B.J.: Ultrathin-layer isoelectric focusing in 50-100 ìm polyacrylamide gels on silanised glass plates or polyester films. Electrophoresis 1, 43-56 (1980). >REFERENCE TO A FILM> Figure 1: Schematic drawing of the covering sheet >REFERENCE TO A FILM> Figure 2: Casein layer floating between aqueous and organic phases after centrifugation >REFERENCE TO A FILM> Figure 3: Flapping technique for casting of ultrathin polyacrylamide gels a = spacer tape (0,25 mm); b = covering sheet (5.3); c, e = glass plates (5.1); d = gel solution (4.1.2); f = gel carrier sheet (5.2) >REFERENCE TO A FILM> Figure 4a: Isoelectric focusing of plasmin-treated caseins from ewes' and goats' milk cheese containing different amounts of cows' milk. % CM = percentage of cows' milk, C = cow, E = ewe, G = goat Upper half of the IEF gel is shown. >REFERENCE TO A FILM> Figure 4b: Isoelectric focusing of plasmin treated caseins from cheese made from mixtures of ewes', goats' and buffalos' milk containing different amounts of cows' milk. % CM = percentage of cows' milk; 1+ = sample containing 1 % of cows' milk and spiked with pure bovine casein at the middle of the track. C = cow, E = ewe, G = goat, B = buffalo. Total separation distance of the IEF gel is shown. >REFERENCE TO A FILM> Figure 5: Superposition of densitograms of standards (STD) and cheese samples made from a mixture of ewes' and goats' milk after isoelectric focusing. a,b = standards containing 0 and 1 % of cows' milk; c-g = cheese samples containing 0, 1, 2, 3 and 7 % of cows' milk. C = cow, E = ewe, G = goat. Upper half of the IEF gel was scanned at ë = 634 nm. (1) The products Ampholine® pH 3,5-9,5 (Pharmacia) and Resolyte® pH 5-7 and pH 6-8 (BDH, Merck) have proved particularly suitable for obtaining the required separation of ã-caseins.

COMMISSION REGULATION (EC) No 1081/96 of 14 June 1996 establishing a reference method for the detection of cows' milk and caseinate in cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk and repealing Regulation (EEC) No 690/92

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Regulation No 804/68 of 27 June 1968 on the common organization of the market in milk and milk products (1), as last amended by Regulation (EC) No 2931/95 (2), and in particular Article 9 (3), Article 16 (1) and (4) and Article 17 (14) thereof,

Whereas aid for private storage of cheeses made from ewes' milk can be granted under Council Regulation (EEC) No 508/71 of 8 March 1971 laying down general rules on private storage aid for long-keeping cheeses (3); whereas a special refund for these same products can be decided under Article 17 of Regulation (EEC) No 804/68; whereas the import of cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk into the Community under preferential arrangements from certain third countries is foreseen;

Whereas, in view of the existence of the abovementioned provisions concerning cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk, it is necessary to verify by appropriate controls that no cows' milk has been incorporated into the products concerned; whereas it is appropriate to establish a Community reference method for the detection of cows' milk, without prejudice to the use of routine methods, if they comply with certain criteria;

Whereas a reference method applicable for cheeses made from ewes' milk, goats' milk or buffalos' milk or mixtures of ewes', goats' and buffalos' milk replaces the reference method described in Commission Regulation (EEC) No 690/92 (4), which can therefore be repealed;

Whereas the measures provided for in this Regulation are in accordance with the opinion of the Management Committee for Milk and Milk Products,

HAS ADOPTED THIS REGULATION:

Article 1

The reference method of analysis figuring in the Annex shall be applied to ensure that cheese which must be made exclusively from ewes' milk, goats' milk or buffalos' milk or from a mixture of ewes', goats' and buffalos' milk does not in fact contain cows' milk casein.

Cows' milk casein shall be held to be present, if the apparent cows' milk casein content of the sample to be analysed is equal to or higher than the content of the reference sample containing 1 % cows' milk described in the Annex.

Article 2

Routine methods for the detection of cows' milk casein in cheeses referred to in Article 1 may be used under the following conditions:

- the detection limit must be 0,5 % or lower,

- false-positive results must not occur. If this cannot be excluded, any sample giving a positive result has to be analysed using the reference method,

- cows' milk casein must be detectable with the required sensitivity even after long ripening periods, as may occur under usual commercial conditions. If this requirement is not fulfilled for a certain type of cheese referred to in Article 1, that cheese must be analysed using the reference method.

Article 3

Regulation (EEC) No 690/92 is repealed. References to Regulation (EEC) No 690/92 shall be understood as references to the present Regulation.

Article 4

This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Communities.

It shall apply from 1 October 1996.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 June 1996.

For the Commission

Franz FISCHLER

Member of the Commission

(1) OJ No L 148, 28. 6. 1968, p. 13.

(2) OJ No L 307, 20. 12. 1995, p. 10.

(3) OJ No L 58, 11. 3. 1971, p. 1.

(4) OJ No L 74, 20. 3. 1992, p. 23.

ANNEX

REFERENCE METHOD FOR THE DETECTION OF COWS' MILK AND CASEINATE IN CHEESES FROM EWES' MILK, GOATS' MILK OR BUFFALOS' MILK OR MIXTURES OF EWES', GOATS' AND BUFFALOS' MILK

1. Scope

Detection of cows' milk and caseinate in cheeses made from ewes' milk, goats' milk, buffalos' milk or mixtures of ewes', goats' and buffalos' milk by isoelectric focusing of ã-caseins after plasminolysis.

2. Field of application

The method is suitable for sensitive and specific detection of native and heat-treated cows' milk and caseinate in fresh and ripened cheeses made from ewes' milk, goats' milk, buffalos' milk or mixtures of ewes', goats' and buffalos' milk. It is not suitable for the detection of milk and cheese adulteration by heat-treated bovine whey protein concentrates.

3. Principle of the method

3.1. Isolation of caseins from cheese and the reference standards.

3.2. Dissolving of the isolated caseins and submitting to plasmin (EC.3.4.21.7) cleavage.

3.3. Isoelectric focusing of plasmin-treated caseins in the presence of urea and staining of proteins.

3.4. Evaluation of stained ã3 and ã2-casein patterns (evidence of cows' milk) by comparison of the pattern obtained from the sample with those obtained in the same gel from the reference standards containing 0 % and 1 % cows' milk.

4. Reagents

Unless otherwise indicated, analytical grade chemicals must be used. Water must be double-distilled or of equivalent purity.

Note: The following details apply to laboratory prepared polyacrylamide gels containing urea, of dimensions 265 × 125 × 0,25 mm. Where other sizes and types of gel are used, the separation conditions may have to be adjusted.

Isoelectric focusing

4.1. Reagents for production of the urea containing polyacrylamide gels

4.1.1. Stock gel solution

Dissolve:

4,85 g acrylamide

0,15g N, N'-methylene-bis-acrylamide (BIS)

48,05 g urea

15,00 g glycerol (87 % w/w),

in water and make up to 100 ml and store in a brown glass bottle in the refrigerator.

Note: A commercially available preblended acrylamide/BIS solution can be used in preference to the quoted fixed weights of the neurotoxic acrylamides. Where such a solution contains 30 % w/v acrylamide and 0,8 % w/v BIS, a volume of 16,2 ml must be used for the formulation instead of the fixed weights. The shelf life of the stock solution is a maximum of 10 days; if its conductivity is more than 5 ìS, de-ionize by stirring with 2 g Amberlite MB-3 for 30 minutes, then filter through a 0,45 ìm membrane.

4.1.2. Gel solution

Prepare a gel solution by mixing additives and ampholytes with the stock gel solution (see 4.1.1).

9,0 ml stock solution

24 mg ß-alanine

500 ìl ampholyte pH 3,5 - 9,5 (1)

250 ìl ampholyte pH 5-7 (2)

250 ìl ampholyte pH 6-8 (3).

Mix the gel solution and de-gas for two to three minutes in an ultrasonic bath or in vacuo.

Note: Prepare the gel solution immediately prior to pouring it (see 6.2).

4.1.3. Catalyst solutions

4.1.3.1. N, N, N' N' - tetramethylethylenediamine (Temed).

4.1.3.2. 40 % w/v ammonium persulphate (PER):

Dissolve 800 mg PER in water and make up to 2 ml.

Note: Always use freshly prepared PER solution.

4.2. Contact fluid

Kerosene or liquid paraffin

4.3. Anode solution

Dissolve 5,77 g phosphoric acid (85 % w/w) in water and dilute to 100 ml.

4.4. Cathode solution

Dissolve 2,00 g sodium hydroxide in water and dilute to 100 ml with water.

Sample preparation

4.5. Reagents for protein isolation

4.5.1. Dilute acetic acid (25,0 ml of glacial acetic acid made up to 100 ml with water)

4.5.2. Dichloromethane

4.5.3. Acetone

4.6. Protein dissolving buffer

Dissolve

5,75 g glycerol (87 % w/w)

24,03 g urea

250 mg dithiothreitol,

in water and make up to 50 ml

Note: Store in a refrigerator, maximum shelf-life one week.

4.7. Reagents for plasmin cleavage of caseins

4.7.1. Ammonium carbonate buffer

Titrate a 0,2 mol/l ammonium hydrogencarbonate solution (1,58 g/100 ml water) containing 0,05 mol/l ethylenediaminetetraacetic acid (EDTA, 1,46 g/100 ml), with a 0,2 mol/l ammonium carbonate solution (1,92 g/100 ml water) containing 0,05 mol/l EDTA to ph 8.

4.7.2. Bovine plasmin (EC. 3.4.21.7), activity at least 5 U/ml.

4.7.3. å-Aminocaproic acid solution for enzyme inhibition

Dissolve 2,624 g å-aminocaproic acid (6 amino-n-hexanoic acid) in 100 ml of 40 % (v/v) ethanol.

4.8. Standards

4.8.1. Certified reference standards of a mixture of renneted ewes' and goats' skimmed milk containing 0 % and 1 % of cows' milk are available from the Commission's Institute for Reference Materials and Measurements, B-2440 Geel, Belgium.

4.8.2. Preparation of laboratory interim-standards of buffalos' renneted milk containing 0 % and 1 % of cows' milk

Skimmed milk is prepared by centrifuging of either buffalo or bovine raw bulk milk at 37 °C at 2 500 g for 20 minutes. After cooling the tube and contents rapidly to 6 to 8 °C, the upper fat layer is removed completely. For the preparation of the 1 % standard add 5,00 ml of bovine skimmed milk to a 495 ml of buffalos' skimmed milk in a 1 l beaker, adjust the pH to 6,4 by the addition of dilute lactic acid (10 % w/v). Adjust the temperature to 35 °C and add 100 ìl of calf rennet (rennet activity 1: 10 000, c. 3 000 U/ml), stir for 1 minute and then leave the beaker covered with an aluminium foil at 35 °C for one hour to allow formation of the curd. After the curd has formed, the whole renneted milk is freeze-dried without prior homogenization or draining of the whey. After freeze-drying it is finely ground to produce a homogeneous powder. For the preparation of the 0 % standard, carry out the same procedure using genuine buffalo skimmed milk. The standards must be stored at - 20 °C.

Note: It is advisable to check the purity of the buffalos' milk by isoelectric focusing of the plasmin-treated caseins before preparation of the standards.

Reagents for protein staining

4.9. Fixative

Dissolve 150 g trichloroacetic acid in water and make up to 1 000 ml.

4.10. Destaining solution

Dilute 500 ml methanol and 200 ml glacial acetic acid to 2 000 ml with distilled water.

Note: Prepare the destaining solution fresh every day; it can be prepared by mixing equal volumes of stock solutions of 50 % (v/v) methanol and 20 % (v/v) glacial acetic acid.

4.11. Staining solutions

4.11.1. Staining solution (stock solution 1)

Dissolve 3,0 g Coomassie Brilliant Blue G-250 (C.I. 42655) in 1 000 ml 90 % (v/v) methanol using a magnetic stirrer (approximately 45 minutes), filter through two medium-speed folded filters.

4.11.2. Staining solution (stock solution 2)

Dissolve 5,0 g copper sulphate pentahydrate in 1 000 ml 20 % (v/v) acetic acid.

4.11.3. Staining solution (working solution)

Mix together 125 ml of each of the stock solutions (4.11.1, 4.11.2) immediately prior to staining.

Note: The staining solution should be prepared on the day that it is used.

5. Equipment

5.1. Glass plates (265 × 125 × 4 mm); rubber roller (width 15 cm); levelling table

5.2. Gel carrier sheet (265 × 125 mm).

5.3. Covering sheet (280 × 125 mm). Stick on strip of adhesive tape (280 × 6 × 0,25 mm) to each long edge (see Figure 1).

5.4. Electrofocusing chamber with cooling plate (e.g. 265 × 125 mm) and suitable power supply (≥ 2,5 kV) or automatic electrophoresis device.

5.5. Circulation cryostat, thermostatically controlled at 12 ± 0,5 °C.

5.6. Centrifuge, adjustable to 3 000 g.

5.7. Electrode strips (≥ 265 mm long).

5.8. Plastic dropping bottles for the anode and cathode solutions.

5.9. Sample applicators (10 × 5 mm, viscose or low protein-absorption filter paper).

5.10. Stainless steel scissors, scalpels and tweezers.

5.11. Stainless steel or glass staining and destaining dishes (e.g. 280 × 150 mm instrument trays).

5.12. Adjustable rod homogenizer (10 mm shaft diameter), rpm range 8 000 to 20 000.

5.13. Magnetic stirrer.

5.14. Ultrasonic bath.

5.15. Film welder.

5.16. 25 ìl micropipettes.

5.17. Vacuum concentrator or freeze-dryer.

5.18. Thermostatically controlled water bath adjustable to 35 and 40 ± 1 °C with shaker.

5.19. Densitometer equipment reading at ë = 634 nm.

6. Procedure

6.1. Sample preparation

6.1.1. Isolation of caseins

Weigh the amount equivalent to 5 g dry mass of cheese or the reference standards into a 100 ml centrifuge tube, add 60 distilled water and homogenize with a rod homogenizer (8 000 to 10 000 rpm). Adjust to pH 4,6 with dil. acetic acid (4.5.1) and centrifuge (5 minutes, 3 000 g). Decant the fat and whey, homogenize the residue at 20 000 rpm in 40 ml distilled water adjusted to pH 4,5 with dil. acetic acid (4.5.1), add 20 ml dichloromethane (4.5.2), homogenize again and centrifuge (5 minutes, 3 000 g). Remove the casein layer that lies between the aqueous and organic phases (see Figure 2) with a spatula and decant off both phases. Rehomogenize the casein in 40 ml distilled water (see above) and 20 ml dichloromethane (4.5.2) and centrifuge. Repeat this procedure until both extraction phases are colourless (two to three times). Homogenize the protein residue with 50 ml acetone (4.5.3) and filter through a medium-speed folded filter paper. Wash the residue on the filter with two separate 25 ml portions of acetone each time and allow to dry in the air or a stream of nitrogen, then pulverize finely in a mortar.

Note: Dry casein isolates should be kept at -20 °C.

6.1.2. Plasmin cleavage of ß-caseins to intensify ã-caseins

Disperse 25 mg of isolated caseins (6.1.1) in 0,5 ml ammonium carbonate buffer (4.7.1) and homogenize for 20 minutes by e.g. using ultrasonic treatment. Heat to 40 °C and add 10 ìl plasmin (4.7.2), mix and incubate for one hour at 40 °C with continuous shaking. To inhibit the enzyme add 20 ìl å-aminocaproic acid solution (4.7.3), then add 200 mg of solid urea and 2 mg of dithiothreitol.

Note: To obtain more symmetry in the focused casein bands it is advisable to freeze-dry the solution after adding the å-aminocaproic acid and then dissolving the residues in 0,5 ml protein dissolving buffer (4.6).

6.2. Preparation of the urea containing polyacrylamide gels

With the aid of a few drops of water roll the gel carrier sheet (5.2) onto a glass plate (5.1), removing any extraneous water with paper towel or tissue. Roll the cover sheet (5.3) with spacers (0,25 mm) onto another glass plate in the same way. Lay the plate horizontally on a levelling table.

Add 10 ìl Temed (4.1.3.1) to the prepared and de-aerated gel solution (4.1.2), stir and add 10 ìl PER-solution (4.1.3.2), mix thoroughly and immediately pour out evenly onto the centre of the cover sheet. Place one edge of the gel carrier plate (sheet side down) on the cover sheet plate and lower it slowly so that a gel film forms between the sheets and spreads out regularly and free of bubbles (Figure 3). Carefully lower the gel carrier plate completely using a thin spatula and place three more glass plates on top of it to act as weights. After polymerization is complete (about 60 minutes) remove the gel polymerized onto the gel carrier sheet along with the cover sheet by tipping the glass plates. Clean the reverse of the carrier sheet carefully to remove gel residues and urea. Weld the gel sandwich into a film tube and store in a refrigerator (maximum six weeks).

Note: The cover sheet with the spacers can be re-used. The polyacrylamide gel can be cut to smaller sizes, recommended when there are few samples or if an automatic electrophoresis device is used (two gels, size 4,5 × 5 cm).

6.3. Isoelectric focusing

Set the cooling thermostat to 12 °C. Wipe off the reverse of the gel carrier sheet with kerosene, then drip a few drops of kerosene (4.2) onto the centre of the cooling block. Then roll the gel sandwich, carrier side down, onto it, taking care to avoid bubbles. Wipe off any excess kerosene and remove the cover sheet. Soak the electrode strips with the electrode solutions (4.3, 4.4), cut to gel length and place in the positions provided (distance of electrodes 9,5 cm).

Conditions for isoelectric focusing:

6.3.1. Gel size 265 × 125 × 0,25 mm

>TABLE>

Note: If thickness or width of the gels are changed, the values for current and power have to be suitably adjusted (e.g. double the values for electric current and power if a 265 × 125 × 0,5 mm gel is used).

6.3.2. Example of a voltage programme for an automatic electrophoresis device (2 gels of 5,0 × 4,5 cm), electrodes without strips applied directly to the gel.

>TABLE>

Place sample applicator in step 2 at 0 Vh.

Remove sample applicator in step 2 at 30 Vh.

6.4. Protein staining

6.4.1. Protein fixation

Remove the electrode strips immediately after turning off the power and put the gel immediately into a staining / destaining dish filled with 200 ml fixative (4.9); leave for 15 minutes, shaking continuously.

6.4.2. Washing and staining the gel plate

Thoroughly drain off the fixative and wash the gel plate twice for 30 seconds each time with 100 ml destaining solution (4.10). Pour off the destaining solution and fill the dish with 250 ml staining solution (4.11.3); allow to stain for 45 minutes with gentle shaking.

6.4.3. Destaining the gel plate

Pour off the staining solution, wash the gel plate twice using a 100 ml destaining solution (4.10) each time, then shake with 200 ml destaining solution for 15 minutes and repeat the destaining step at least two or three times until the background is clear and uncoloured. Then rinse the gel plate with distilled water (2 × 2 minutes) and dry in the air (2 to 3 hours) or with a hairdryer (10 to 15 minutes).

Note 1: Carry out fixing, washing, staining and destaining at 20 °C. Do not use elevated temperatures.

Note 2: If more sensitive silver staining (e.g. Silver Staining Kit, Protein, Pharmacia Biotech, Code No 17-1150-01) is preferred, plasmin-treated casein samples have to be diluted to 5 mg/ml.

7. Evaluation

Evaluation is performed by comparing the protein patterns of the unknown sample with reference standards on the same gel. Detection of cows' milk in cheeses from ewes' milk, goats' milk and buffalos' milk and mixtures of ewes', goats' and buffalos' milk is done via the ã3- and ã2-caseins, whose isoelectric points range between pH 6,5 and pH 7,5 (Figures 4 a, b, Figure 5). The detection limit is less than 0,5 %.

7.1. Visual estimation

For visual evaluation of the amount of bovine milk it is advisable to adjust the concentrations of samples and standards to obtain the same level of intensity of the ovine, caprine and/or buffalo ã2- and ã3-caseins (see 'ã2 E,G,B` and 'ã3 E,G,B` in figures 4 a, b and Figure 5). After which the amount of bovine milk (less than, equal to or greater than 1 %) in the unknown sample can be judged directly by comparing the intensity of the bovine ã3- and ã2-caseins (see 'ã3 C` and 'ã2 C` in Figures 4 a, b and Figure 5) to those of the 0 % and 1 % reference standards (ewe, goat) or, laboratory interim-standards (buffalo).

7.2. Densitometric estimation

If available, apply densitometry (5.19) for the determination of the peak area ratio of bovine to ovine, caprine and/or buffalo ã2- and ã3-caseins (see Figure 5). Compare this value to ã2- and ã3-casein peak area ratio of the 1 % reference standard (ewe, goat) or laboratory interim-standard (buffalo) analysed on the same gel.

Note: The method is operating satisfactorily, if there is a clear positive signal for both bovine ã2- and ã3-caseins in the 1 % reference standard but not in the 0 % reference standard. If not, optimize the procedure following the details of the method precisely.

A sample is judged as being positive, if both bovine ã2- and ã3-caseins or the corresponding peak area ratios are equal to or greater than the level of the 1 % reference standard.

8. References

1. Addeo F., Moio L., Chianese L., Stingo C., Resmini P., Berner I., Krause I., Di Luccia A., Bocca A.: Use of plasmin to increase the sensitivity of the detection of bovine milk in ovine and/or caprine cheese by gel isoelectric focusing of ã2-caseins. Milchwissenschaft 45, 708-711 (1990).

2. Addeo F., Nicolai M.A., Chianese L., Moio L., Spagna Musso S., Bocca A., Del Giovine L.: A control method to detect bovine milk in ewe and water buffalo cheese using immunoblotting. Milchwissenschaft 50, 83-85 (1995).

3. Krause I., Berner I., Klostermeyer H.: Sensitive detection of cow milk in ewe and goat milk and cheese by carrier ampholyte - and carrier ampholyte/immobilized pH gradient - isoelectric focusing of ã-caseins using plasmin as signal amplifier. in: Electrophoresis-Forum 89 (B. J. Radola, ed.) pp 389-393, Bode-Verlag, München (1989).

4. Krause I., Belitz H.-D., Kaiser K.-P.: Nachweis von Kuhmilch in Schaf- und Ziegenmilch bzw. -käse durch isoelektrische Fokussierung in harnstoffhaligen Polyacrylamidgelen. Z. Lebensm. Unters. Forsch. 174, 195-199 (1982).

5. Radola B.J.: Ultrathin-layer isoelectric focusing in 50-100 ìm polyacrylamide gels on silanised glass plates or polyester films. Electrophoresis 1, 43-56 (1980).

>REFERENCE TO A FILM>

Figure 1: Schematic drawing of the covering sheet

>REFERENCE TO A FILM>

Figure 2: Casein layer floating between aqueous and organic phases after centrifugation

>REFERENCE TO A FILM>

Figure 3: Flapping technique for casting of ultrathin polyacrylamide gels

a = spacer tape (0,25 mm); b = covering sheet (5.3); c, e = glass plates (5.1); d = gel solution (4.1.2); f = gel carrier sheet (5.2)

>REFERENCE TO A FILM>

Figure 4a: Isoelectric focusing of plasmin-treated caseins from ewes' and goats' milk cheese containing different amounts of cows' milk.

% CM = percentage of cows' milk, C = cow, E = ewe, G = goat

Upper half of the IEF gel is shown.

>REFERENCE TO A FILM>

Figure 4b: Isoelectric focusing of plasmin treated caseins from cheese made from mixtures of ewes', goats' and buffalos' milk containing different amounts of cows' milk.

% CM = percentage of cows' milk; 1+ = sample containing 1 % of cows' milk and spiked with pure bovine casein at the middle of the track. C = cow, E = ewe, G = goat, B = buffalo.

Total separation distance of the IEF gel is shown.

>REFERENCE TO A FILM>

Figure 5: Superposition of densitograms of standards (STD) and cheese samples made from a mixture of ewes' and goats' milk after isoelectric focusing.

a,b = standards containing 0 and 1 % of cows' milk; c-g = cheese samples containing 0, 1, 2, 3 and 7 % of cows' milk. C = cow, E = ewe, G = goat.

Upper half of the IEF gel was scanned at ë = 634 nm.

(1) The products Ampholine® pH 3,5-9,5 (Pharmacia) and Resolyte® pH 5-7 and pH 6-8 (BDH, Merck) have proved particularly suitable for obtaining the required separation of ã-caseins.