Council Directive (EU) 2015/652 of 20 April 2015 laying down calculation methods and reporting requirements pursuant to Directive 98/70/EC of the European Parliament and of the Council relating to the quality of petrol and diesel fuels
2015/652 • 32015L0652
Legal Acts - L
- 176 Inbound citations:
- •
- 1 Cited paragraphs:
- •
- 84 Outbound citations:
25.4.2015
EN
Official Journal of the European Union
L 107/26
COUNCIL DIRECTIVE (EU) 2015/652
of 20 April 2015
laying down calculation methods and reporting requirements pursuant to Directive 98/70/EC of the European Parliament and of the Council relating to the quality of petrol and diesel fuels
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 98/70/EC of the European Parliament and of the Council of 13 October 1998 relating to the quality of petrol and diesel fuels and amending Council Directive 93/12/EEC (1), and in particular Article 7a(5) thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1)
The method for calculating greenhouse gas emissions of fuels and other energy from non-biological sources to be established pursuant to Article 7a(5) of Directive 98/70/EC should yield reporting of sufficient accuracy, so that the Commission can critically assess the performance of suppliers in meeting their obligations under Article 7a(2) of that Directive. The calculation method should ensure accuracy, while having due regard for the complexity of the associated administrative requirements. At the same time, it should incentivise suppliers to reduce the greenhouse gas intensity of the fuel they supply. Careful consideration should also be given to the impact of the calculation method on refineries in the Union. Hence, the calculation method should be based on average greenhouse gas intensities that represent an industry average value which is typical for a particular fuel. This would have the advantage of reducing the administrative burden on suppliers and Member States. At this stage, the proposed calculation method should not require differentiation of the greenhouse gas intensity of fuel on the basis of the source of the raw material, as this would affect current investments in certain refineries in the Union.
(2)
Reporting requirements for suppliers which are small and medium-sized enterprises (SMEs) as defined in Commission Recommendation 2003/361/EC (2) should be minimised as far as possible in the context of Article 7a(1) of Directive 98/70/EC. Similarly, importers of petrol and diesel refined outside the Union should not be obliged to provide detailed information about the sources of the crude oils used to make those fuels, as this information may not be available or may be difficult to obtain.
(3)
In order to incentivise further greenhouse gas emission reductions, savings claimed from upstream emission reductions (UERs), including from flaring and venting, should be included in the calculation of suppliers' life cycle greenhouse gas emissions. In order to facilitate the claiming of UERs by suppliers, the use of various emission schemes should be allowed for calculating and certifying emission reductions. Only UER projects which start after the date of the establishment of the fuel baseline standard set out in Article 7a(5)(b) of Directive 98/70/EC, i.e. 1 January 2011, should be eligible.
(4)
Weighted average greenhouse gas default values representing the crude oils consumed in the Union provide a simple calculation method by which suppliers may determine the greenhouse gas content of the fuel they supply.
(5)
UERs should be estimated and validated in accordance with principles and standards identified in International Standards, and in particular ISO 14064, ISO 14065 and ISO 14066.
(6)
It is furthermore appropriate to facilitate the implementation by Member States of legislation on UERs, including from flaring and venting. To this end, non-legislative guidance should be prepared under the auspices of the Commission on approaches to quantify, verify, validate, monitor and report such UERs (including reductions in flaring and venting at production sites) prior to the end of the transposition period set in Article 7 of this Directive.
(7)
Article7a(5)(b) of Directive 98/70/EC requires the establishment of a method to determine the fuel baseline standard based on the life cycle greenhouse gas emissions per unit of energy from fossil fuels in 2010. The fuel baseline standard should be based on the quantities of diesel, petrol, non-road gas oil, liquefied petroleum gas (LPG) and compressed natural gas (CNG) consumed using data officially reported by the Member States to the United Nations Framework Convention on Climate Change (UNFCCC) in 2010. The fuel baseline standard should not be the fossil fuel comparator that is used for calculating greenhouse gas savings from biofuels, which should remain as set out in Annex IV to Directive 98/70/EC.
(8)
Since the composition of the relevant fossil fuel mix changes little from year to year, the aggregate variation in the greenhouse gas intensity of the fossil fuels from year to year will also be small. It is therefore appropriate that the fuel baseline standard be based on the 2010 Union average consumption data as reported by the Member States to the UNFCCC.
(9)
The fuel baseline standard should represent an average upstream greenhouse gas intensity and the intensity of the fuel of a refinery of average complexity for fossil fuels. Hence, the fuel baseline standard should be calculated using the respective average fuel default values. The fuel baseline standard should remain unchanged for the period up until 2020, in order to provide regulatory certainty to suppliers in respect of their obligations to reduce the greenhouse gas intensity of the fuels they supply.
(10)
Article 7a(5)(d) of Directive 98/70/EC provides for the adoption of a method to calculate the contribution of electric road vehicles to reduce life cycle greenhouse gas emissions. Pursuant to that Article, the calculation method should be compatible with Article 3(4) of Directive 2009/28/EC of the European Parliament and of the Council (3). To ensure this compatibility, the same adjustment factor should be used for the powertrain efficiency.
(11)
Electricity supplied for use in road transport may be reported by suppliers, as laid down in Article 7a(1) of Directive 98/70/EC, as part of their annual reports to the Member States. In order to limit administrative costs, it is appropriate that the calculation method be based on an estimate rather than on an actual measurement of the consumption of electricity in an electric road vehicle or motorcycle for the purpose of supplier reporting.
(12)
It is appropriate to include a detailed approach for estimating the quantity and the greenhouse gas intensity of biofuels in cases where processing of a biofuel and a fossil fuel occurs during the same process. A specific method is needed because the resulting quantity of the biofuel is not measurable, such as during co-hydro treatment of vegetable oils with a fossil fuel. Article 7d(1) of Directive 98/70/EC stipulates that the life cycle greenhouse gas emissions of biofuels are, for the purposes of Article 7a and Article 7b(2) of that Directive, to be calculated with the same method. Therefore, the certification of greenhouse gas emissions by recognised voluntary schemes is as valid for the purposes of Article 7a as it is for the purposes of Article 7b(2) of Directive 98/70/EC.
(13)
The supplier reporting requirement laid down in Article 7a(1) of Directive 98/70/EC should be supplemented by a harmonised format and harmonised definitions of the data to be reported. A harmonisation of the definitions of data is needed for the proper execution of the greenhouse gas intensity calculation linked to an individual supplier's reporting obligations, as the data form key inputs into the calculation method harmonised pursuant to Article 7a(5)(a) of Directive 98/70/EC. These data include the supplier's identification, the quantity of fuel or energy placed on the market and the fuel or energy type placed on the market.
(14)
The supplier reporting requirement laid down in Article 7a(1) of Directive 98/70/EC should be supplemented by harmonised reporting requirements, a reporting format and harmonised definitions for Member State reporting to the Commission pertaining to the greenhouse gas performance of fuels consumed in the Union. In particular, these reporting requirements will enable the updating of the fossil fuel comparator described in point 19 of Part C of Annex IV to Directive 98/70/EC and point 19 of Part C of Annex V to Directive 2009/28/EC, and they will facilitate the reporting required pursuant to Articles 8(3) and 9(2) of Directive 98/70/EC as well as the updating of the calculation method to technical and scientific progress, in order to ensure that it meets its intended purpose. These data should include the quantity of fuel or energy placed on the market and fuel or energy type, the place of purchase and the origin of the fuel or energy placed on the market.
(15)
It is appropriate for Member States to allow suppliers to fulfil their reporting requirements by relying on equivalent data being collected pursuant to other Union or national legislation so as to reduce the administrative burden, provided that the reporting is conducted in accordance with the requirements set out in Annex IV and the definitions laid down in Annexes I and III.
(16)
In order to facilitate reporting by groups of suppliers pursuant to Article 7a(4) of Directive 98/70/EC, Article 7a(5)(c) of that Directive allows for the establishment of any necessary rules. It is desirable to facilitate such reporting in order to avoid disruption to physical fuel movements, since different suppliers place different fuels of differing proportions on the market, and hence may have to deploy different levels of resources to meet the greenhouse gas reduction target. It is therefore necessary to harmonise the definitions of the suppliers' identification, the quantity of fuel or energy placed on the market, the fuel or energy type, the place of purchase and the origin of the fuel or energy placed on the market. Furthermore, to avoid double counting in joint supplier reporting pursuant to Article 7a(4), it is appropriate to harmonise the implementation of the calculation and reporting method in the Member States, including the reporting to the Commission, so that the requisite information from a group of suppliers relates to a specific Member State.
(17)
Pursuant to Article 8(3) of Directive 98/70/EC, Member States are to submit an annual report of national fuel quality data for the preceding calendar year in accordance with the format established in Commission Decision 2002/159/EC (4). To cover the amendments introduced to Directive 98/70/EC by Directive 2009/30/EC of the European Parliament and of the Council (5), and the subsequent additional reporting requirements on the Member States, and in the interest of effectiveness and harmonisation, it is necessary to clarify which information should be reported, and to adopt a format for the submission of data by suppliers and Member States.
(18)
The Commission presented a draft measure to the Committee established by Directive 98/70/EC on 23 February 2012. The Committee was unable to adopt an opinion by the necessary qualified majority. It is therefore appropriate for the Commission to present a proposal to the Council pursuant to Article 5a(4) of Council Decision 1999/468/EC (6),
HAS ADOPTED THIS DIRECTIVE:
Article 1
Subject matter — Scope
1. This Directive lays down rules on calculation methods and reporting requirements in accordance with Directive 98/70/EC.
2. This Directive applies to fuels used to propel road vehicles, non-road mobile machinery (including inland waterway vessels when not at sea), agricultural and forestry tractors, recreational craft when not at sea and electricity for use in road vehicles.
Article 2
Definitions
For the purposes of this Directive, and in addition to the definitions already contained in Directive 98/70/EC, the following definitions apply:
(1)
‘upstream emissions’ means all greenhouse gas emissions occurring prior to the raw material entering a refinery or a processing plant where the fuel, as referred to in Annex I, was produced;
(2)
‘natural bitumen’ means any source of refinery raw material that:
(a)
has an American Petroleum Institute (API) gravity of 10 degrees or less when situated in a reservoir formation at the place of extraction as defined pursuant to the testing method of the American Society for Testing and Materials (ASTM) (7) D287;
(b)
has an annual average viscosity at reservoir temperature greater than that calculated by the equation: Viscosity (Centipoise) = 518,98e-0,038T, where T is the temperature in Celsius;
(c)
falls within the definition for tar sands under combined nomenclature (CN) code 2714 as outlined in Council Regulation (EEC) No 2658/87 (8); and
(d)
where the mobilisation of the source of the raw material is achieved by mining extraction or thermally enhanced gravity drainage where the thermal energy is mainly derived from sources other than the feedstock source itself;
(3)
‘oil shale’ means any source of refinery raw material as situated in a rock formation containing solid kerogen and falling within the definition for oil shale under CN code 2714 as outlined in Regulation (EEC) No 2658/87. Mobilisation of the source of the raw material is achieved by mining extraction or thermally enhanced gravity drainage;
(4)
‘fuel baseline standard’ means a fuel baseline standard based on the life cycle greenhouse gas emissions per unit of energy from fossil fuels in 2010;
(5)
‘conventional crude’ means any refinery raw material exhibiting an API gravity that is higher than 10 degrees when situated in a reservoir formation at its place of origin as measured per testing method ASTM D287, and not falling within the definition for CN code 2714 as set out in Regulation (EEC) No 2658/87.
Article 3
Method for calculating the greenhouse gas intensity of fuels and energy supplied other than biofuels and reporting by suppliers
1. For the purposes of Article 7a(2) of Directive 98/70/EC, Member States shall ensure that suppliers use the calculation method set out in Annex I to this Directive to determine the greenhouse gas intensity of the fuels they supply.
2. For the purposes of the second subparagraph of Article 7a(1) and of Article 7a(2) of Directive 98/70/EC, Member States shall require suppliers to report data using the definitions and the calculation method set out in Annex I to this Directive. The data shall be reported annually using the template set out in Annex IV to this Directive.
3. For the purposes of Article 7a(4) of Directive 98/70/EC, any Member State shall ensure that a group of suppliers choosing to be considered as a single supplier meets its obligation under Article 7a(2) within that Member State.
4. For suppliers that are SMEs, Member States shall apply the simplified method set out in Annex I to this Directive.
Article 4
Calculation of fuel baseline standard and greenhouse gas intensity reduction
For the purposes of verifying compliance by suppliers with their obligation under Article 7a(2) of Directive 98/70/EC, Member States shall require suppliers to compare their achieved reductions of life cycle greenhouse gas emissions from fuels and from electricity to the fuel baseline standard set out in Annex II to this Directive.
Article 5
Reporting by Member States
1. When submitting reports to the Commission under Article 8(3) of Directive 98/70/EC, Member States shall provide the Commission with data related to compliance with Article 7a of that Directive, as defined in Annex III to this Directive.
2. Member States shall use the ReportNet tools of the European Environment Agency provided pursuant to Regulation (EC) No 401/2009 of the European Parliament and of the Council (9) for the submission of the data set out in Annex III to this Directive. The data shall be transmitted by the Member States by means of electronic data transfer to the Central Data Repository managed by the European Environment Agency.
3. The data shall be provided annually using the template set out in Annex IV. Member States shall notify the Commission of the date of transmission and the contact name of the competent authority responsible for verifying and reporting the data to the Commission.
Article 6
Penalties
Member States shall lay down the rules on penalties applicable to infringements of national provisions adopted pursuant to this Directive and shall take all measures necessary to ensure that they are implemented. The penalties provided for must be effective, proportionate and dissuasive. Member States shall notify those provisions to the Commission by 21 April 2017 and shall notify it without delay of any subsequent amendment affecting them.
Article 7
Transposition
1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 21 April 2017 at the latest. They shall immediately inform the Commission thereof.
2. When Member States adopt those measures, they shall contain a reference to this Directive or shall be accompanied by such a reference on the occasion of their official publication. The methods of making such reference shall be laid down by Member States.
3. Member States shall communicate to the Commission the text of the main measures of national law which they adopt in the field covered by this Directive.
Article 8
Entry into force
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 9
Addressees
This Directive is addressed to the Member States.
Done at Luxembourg, 20 April 2015.
For the Council
The President
J. DŪKLAVS
(1) OJ L 350, 28.12.1998, p. 58.
(2) Commission Recommendation 2003/361/EC of 6 May 2003 concerning the definition of micro, small and medium-sized enterprises (OJ L 124, 20.5.2003, p. 36).
(3) Directive 2009/28/EC of the European Parliament and of the Council of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC (OJ L 140, 5.6.2009, p. 16).
(4) Commission Decision 2002/159/EC of 18 February 2002 on a common format for the submission of summaries of national fuel quality data (OJ L 53, 23.2.2002, p. 30).
(5) Directive 2009/30/EC of the European Parliament and of the Council of 23 April 2009 amending Directive 98/70/EC as regards the specification of petrol, diesel and gas-oil and introducing a mechanism to monitor and reduce greenhouse gas emissions and amending Council Directive 1999/32/EC as regards the specification of fuel used by inland waterway vessels and repealing Directive 93/12/EEC (OJ L 140, 5.6.2009, p. 88).
(6) Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission (OJ L 184, 17.7.1999, p. 23).
(7) American Society for Testing and Materials: http://www.astm.org/index.shtml
(8) Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).
(9) Regulation (EC) No 401/2009 of the European Parliament and of the Council of 23 April 2009 on the European Environment Agency and the European Environment Information and Observation Network (OJ L 126, 21.5.2009, p. 13).
ANNEX I
METHOD FOR THE CALCULATION AND REPORTING OF THE LIFE CYCLE GREENHOUSE GAS INTENSITY OF FUELS AND ENERGY BY SUPPLIERS
Part 1
Calculation of a supplier's greenhouse gas intensity of fuels and energy
The greenhouse gas intensity for fuels and energy is expressed in terms of grams of carbon dioxide equivalent per mega joule of fuel (gCO2eq/MJ).
1.
The greenhouse gases taken into account for the purposes of calculating the greenhouse gas intensity of fuel is carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4). For the purpose of calculating CO2 equivalence, emissions of those gases are valued in terms of CO2 equivalent emissions, as follows:
CO2: 1;
CH4: 25;
N2O: 298
2.
Emissions from the manufacture of machinery and equipment utilised in extraction, production, refining and consumption of fossil fuels are not taken into account in the greenhouse gas calculation.
3.
A supplier's greenhouse gas intensity from the life cycle greenhouse gas emissions of all fuels and energy supplied shall be calculated in accordance with the formula below:
where:
(a)
‘#’ means the supplier's identification (i.e. the identification of the entity liable to pay excise duty) defined in Commission Regulation (EC) No 684/2009 (1) as the Trader Excise Number (System for Exchange of Excise Data (SEED) registration number or value added tax (VAT) identification number in point 5(a) of Table 1 of Annex I to that Regulation for Destination Type codes 1 to 5 and 8), which is also the entity liable to pay the excise duty in accordance with Article 8 of Council Directive 2008/118/EC (2) at the time that excise duty became chargeable in accordance with Article 7(2) of Directive 2008/118/EC. If this identification is not available, Member States shall ensure that an equivalent means of identification is established in accordance with a national excise duty reporting scheme;
(b)
‘x’ means the fuel and energy types falling within the scope of this Directive as expressed in point17(c) of Table 1 of Annex I to Regulation (EC) No 684/2009. If these data are not available, Member States shall collect equivalent data in accordance with a nationally established excise duty reporting scheme;
(c)
‘MJx’ means the total energy supplied and converted from reported volumes of fuel ‘x’ expressed in mega joules. This is calculated as follows:
(i)
The quantity of each fuel per fuel type
It is derived from data reported pursuant to points 17(d), (f) and (o) of Table 1 of Annex I to Regulation (EC) No 684/2009. Biofuel quantities are converted to their lower-heat-value energy content pursuant to the energy densities set out in Annex III to Directive 2009/28/EC. Quantities of fuels from non-biological origin are converted to their lower-heat-value energy content pursuant to energy densities set out in Appendix 1 to the Joint Research Centre-EUCAR-CONCAWE (JEC) (3) Well-to-Tank report (version 4) of July 2013 (4);
(ii)
Simultaneous co-processing of fossil fuels and biofuels
Processing includes any modification during the life cycle of a fuel or energy supplied causing a change to the molecular structure of the product. The addition of denaturant does not fall under this processing. The quantity of biofuels co-processed with fuels from non-biological origin reflects the post-processing state of the biofuel. The quantity of the co-processed biofuel is determined according to the energy balance and efficiency of the co-processing process as set out in point 17 of Part C of Annex IV to Directive 98/70/EC.
Where multiple biofuels are blended with fossil fuels, the quantity and type of each biofuel is taken into account in the calculation and reported by suppliers to the Member States.
The quantity of biofuel supplied that does not meet the sustainability criteria referred to in Article 7b(1) of Directive 98/70/EC is counted as fossil fuel.
E85 petrol-ethanol blend shall be calculated as a separate fuel for the purpose of Article 6 of Regulation (EC) No 443/2009 of the European Parliament and of the Council (5).
If quantities are not collected pursuant to Regulation (EC) No 684/2009, Member States shall collect equivalent data in accordance with a nationally established excise duty reporting scheme;
(iii)
Quantity of electricity consumed
This is the amount of electricity consumed in road vehicles or motorcycles where a supplier reports this amount of energy to the relevant authority in each Member State in accordance with the following formula:
Electricity consumed = distance travelled (km) × electricity consumption efficiency (MJ/km);
(d)
Upstream emission reduction (UER)
‘UER’ is the upstream emission reduction of greenhouse gases claimed by a supplier, measured in gCO2eq if quantified and reported in accordance with the following requirements:
(i)
Eligibility
UERs shall only be applied to the upstream emission's part of the average default values for petrol, diesel, CNG or LPG.
UERs originating from any country may be counted as a reduction in greenhouse gas emissions against fuels from any feedstock source supplied by any supplier.
UERs shall only be counted if they are associated with projects that have started after 1 January 2011.
It is not necessary to prove that UERs would not have taken place without the reporting requirement set out in Article 7a of Directive 98/70/EC;
(ii)
Calculation
UERs shall be estimated and validated in accordance with principles and standards identified in International Standards, and in particular ISO 14064, ISO 14065 and ISO 14066.
The UERs and baseline emissions are to be monitored, reported and verified in accordance with ISO 14064 and providing results of equivalent confidence of Commission Regulation (EU) No 600/2012 (6) and Commission Regulation (EU) No 601/2012 (7). The verification of methods for estimating UERs must be done in accordance with ISO 14064-3 and the organisation verifying this must be accredited in accordance with ISO 14065;
(e)
‘GHGix’ is the greenhouse gas intensity of fuel or energy ‘x’ expressed in gCO2eq/MJ. Suppliers shall calculate the greenhouse gas intensity of each fuel or energy as follows:
(i)
Greenhouse gas intensity of fuels from a non-biological origin is the ‘weighted life cycle greenhouse gas intensity’ per fuel type listed in the last column of the table under point 5 of Part 2 of this Annex;
(ii)
Electricity is calculated as described in point 6 of Part 2;
(iii)
Greenhouse gas intensity of biofuels
The greenhouse gas intensity of biofuels meeting the sustainability criteria referred to in Article 7b(1) of Directive 98/70/EC is calculated in accordance with Article 7d of that Directive. In case data on the life cycle greenhouse gas emissions of biofuels was obtained in accordance with an agreement or scheme that has been the subject of a decision pursuant to Article 7c(4) of Directive 98/70/EC covering Article 7b(2) of that Directive, this data is also to be used to establish the greenhouse gas intensity of biofuels under Article 7b(1) of that Directive. The greenhouse gas intensity for biofuels not meeting the sustainability criteria referred to in Article 7b(1) of Directive 98/70/EC is equal to the greenhouse intensity of the respective fossil fuel derived from conventional crude oil or gas;
(iv)
Simultaneous co-processing of fuels from non-biological origin and biofuels
The greenhouse gas intensity of biofuels co-processed with fossil fuels shall reflect the post-processing state of the biofuel;
(f)
‘AF’ represents the adjustment factors for powertrain efficiencies:
Predominant conversion technology
Efficiency factor
Internal combustion engine
1
Battery electric powertrain
0,4
Hydrogen fuel cell electric powertrain
0,4
Part 2
Reporting by suppliers for fuels other than biofuels
1. UERs of fossil fuels
In order for UERs to be eligible for the purposes of the reporting and calculation method, suppliers shall report the following to the authority designated by the Member States:
(a)
the starting date of the project, which must be after 1 January 2011;
(b)
the annual emission reductions in gCO2eq;
(c)
the duration for which the claimed reductions occurred;
(d)
the project location closest to the source of the emissions in latitude and longitude coordinates in degrees to the fourth decimal place;
(e)
the baseline annual emissions prior to installation of reduction measures and annual emissions after the reduction measures have been implemented in gCO2eq/MJ of feedstock produced;
(f)
the non-reusable certificate number uniquely identifying the scheme and the claimed greenhouse gas reductions;
(g)
the non-reusable number uniquely identifying the calculation method and the associated scheme;
(h)
where the project relates to oil extraction, the average annual historical and reporting year gas-to-oil ratio (GOR) in solution, reservoir pressure, depth and well production rate of the crude oil.
2. Origin
‘Origin’ means the feedstock trade name listed in point 7 of Part 2 of this Annex, but only where suppliers hold the necessary information by virtue of:
(a)
being a person or undertaking importing crude oil from third countries or receiving a crude oil delivery from another Member State pursuant to Article 1 of Council Regulation (EC) No 2964/95 (8); or
(b)
arrangements to share information agreed with other suppliers.
In all other cases, origin shall refer to whether the fuel is of EU or non-EU origin.
The information collected and reported by suppliers to the Member States concerning the origin of fuels shall be confidential, but this shall not prevent the publication by the Commission of general information or information in summary form which does not contain details relating to individual undertakings;
For biofuels, origin means the biofuel production pathway set out in Annex IV to Directive 98/70/EC.
Where multiple feedstocks are used, suppliers shall report on the quantity in metric tonnes of finished product of each feedstock produced in the respective processing facility during the reporting year.
3. Place of purchase
‘Place of purchase’ means the country and name of the processing facility where the fuel or energy underwent the last substantial transformation used to confer the origin of the fuel or energy in accordance with Commission Regulation (EEC) No 2454/93 (9).
4. SMEs
By way of derogation for suppliers that are SMEs, ‘origin’ and ‘place of purchase’ is either EU or non-EU, as appropriate, irrespective of whether they import crude oil or they supply petroleum oils and oils obtained from bituminous materials.
5. Average life cycle greenhouse gas intensity default values for fuels other than biofuels and electricity
Raw material source and process
Fuel placed on the market
Life cycle GHG intensity (gCO2eq/MJ)
Weighted life cycle GHG intensity (gCO2eq/MJ)
Conventional crude
Petrol
93,2
93,3
Natural Gas-to-Liquid
94,3
Coal-to-Liquid
172
Natural bitumen
107
Oil shale
131,3
Conventional crude
Diesel or gasoil
95
95,1
Natural Gas-to-Liquid
94,3
Coal-to-Liquid
172
Natural bitumen
108,5
Oil shale
133,7
Any fossil sources
Liquefied Petroleum Gas in a spark ignition engine
73,6
73,6
Natural Gas, EU mix
Compressed Natural Gas in a spark ignition engine
69,3
69,3
Natural Gas, EU mix
Liquefied Natural Gas in a spark ignition engine
74,5
74,5
Sabatier reaction of hydrogen from non-biological renewable energy electrolysis
Compressed synthetic methane in a spark ignition engine
3,3
3,3
Natural gas using steam reforming
Compressed Hydrogen in a fuel cell
104,3
104,3
Electrolysis fully powered by non-biological renewable energy
Compressed Hydrogen in a fuel cell
9,1
9,1
Coal
Compressed Hydrogen in a fuel cell
234,4
234,4
Coal with Carbon Capture and Storage of process emissions
Compressed Hydrogen in a fuel cell
52,7
52,7
Waste plastic derived from fossil feedstocks
Petrol, diesel or gasoil
86
86
6. Electricity
For the reporting by energy suppliers of electricity consumed by electric vehicles and motorcycles, Member States should calculate national average life cycle default values in accordance with appropriate International Standards.
Alternatively, Member States may permit their suppliers to establish greenhouse gas intensity values (gCO2eq/MJ) for electricity from data reported by Member States on the basis of:
(a)
Regulation (EC) No 1099/2008 of the European Parliament and of the Council (10);
(b)
Regulation (EU) No 525/2013 of the European Parliament and of the Council (11); or
(c)
Commission Delegated Regulation (EU) No 666/2014 (12).
7. Feedstock trade name
Country
Feedstock trade name
API
Sulphur (wt %)
Abu Dhabi
Al Bunduq
38,5
1,1
Abu Dhabi
Mubarraz
38,1
0,9
Abu Dhabi
Murban
40,5
0,8
Abu Dhabi
Zakum (Lower Zakum/Abu Dhabi Marine)
40,6
1
Abu Dhabi
Umm Shaif (Abu Dhabi Marine)
37,4
1,5
Abu Dhabi
Arzanah
44
0
Abu Dhabi
Abu Al Bu Khoosh
31,6
2
Abu Dhabi
Murban Bottoms
21,4
Not available (NA)
Abu Dhabi
Top Murban
21
NA
Abu Dhabi
Upper Zakum
34,4
1,7
Algeria
Arzew
44,3
0,1
Algeria
Hassi Messaoud
42,8
0,2
Algeria
Zarzaitine
43
0,1
Algeria
Algerian
44
0,1
Algeria
Skikda
44,3
0,1
Algeria
Saharan Blend
45,5
0,1
Algeria
Hassi Ramal
60
0,1
Algeria
Algerian Condensate
64,5
NA
Algeria
Algerian Mix
45,6
0,2
Algeria
Algerian Condensate (Arzew)
65,8
0
Algeria
Algerian Condensate (Bejaia)
65,0
0
Algeria
Top Algerian
24,6
NA
Angola
Cabinda
31,7
0,2
Angola
Takula
33,7
0,1
Angola
Soyo Blend
33,7
0,2
Angola
Mandji
29,5
1,3
Angola
Malongo (West)
26
NA
Angola
Cavala-1
42,3
NA
Angola
Sulele (South-1)
38,7
NA
Angola
Palanca
40
0,14
Angola
Malongo (North)
30
NA
Angola
Malongo (South)
25
NA
Angola
Nemba
38,5
0
Angola
Girassol
31,3
NA
Angola
Kuito
20
NA
Angola
Hungo
28,8
NA
Angola
Kissinje
30,5
0,37
Angola
Dalia
23,6
1,48
Angola
Gimboa
23,7
0,65
Angola
Mondo
28,8
0,44
Angola
Plutonio
33,2
0,036
Angola
Saxi Batuque Blend
33,2
0,36
Angola
Xikomba
34,4
0,41
Argentina
Tierra del Fuego
42,4
NA
Argentina
Santa Cruz
26,9
NA
Argentina
Escalante
24
0,2
Argentina
Canadon Seco
27
0,2
Argentina
Hidra
51,7
0,05
Argentina
Medanito
34,93
0,48
Armenia
Armenian Miscellaneous
NA
NA
Australia
Jabiru
42,3
0,03
Australia
Kooroopa (Jurassic)
42
NA
Australia
Talgeberry (Jurassic)
43
NA
Australia
Talgeberry (Up Cretaceous)
51
NA
Australia
Woodside Condensate
51,8
NA
Australia
Saladin-3 (Top Barrow)
49
NA
Australia
Harriet
38
NA
Australia
Skua-3 (Challis Field)
43
NA
Australia
Barrow Island
36,8
0,1
Australia
Northwest Shelf Condensate
53,1
0
Australia
Jackson Blend
41,9
0
Australia
Cooper Basin
45,2
0,02
Australia
Griffin
55
0,03
Australia
Buffalo Crude
53
NA
Australia
Cossack
48,2
0,04
Australia
Elang
56,2
NA
Australia
Enfield
21,7
0,13
Australia
Gippsland (Bass Strait)
45,4
0,1
Azerbaijan
Azeri Light
34,8
0,15
Bahrain
Bahrain Miscellaneous
NA
NA
Belarus
Belarus Miscellaneous
NA
NA
Benin
Seme
22,6
0,5
Benin
Benin Miscellaneous
NA
NA
Belize
Belize Light Crude
40
NA
Belize
Belize Miscellaneous
NA
NA
Bolivia
Bolivian Condensate
58,8
0,1
Brazil
Garoupa
30,5
0,1
Brazil
Sergipano
25,1
0,4
Brazil
Campos Basin
20
NA
Brazil
Urucu (Upper Amazon)
42
NA
Brazil
Marlim
20
NA
Brazil
Brazil Polvo
19,6
1,14
Brazil
Roncador
28,3
0,58
Brazil
Roncador Heavy
18
NA
Brazil
Albacora East
19,8
0,52
Brunei
Seria Light
36,2
0,1
Brunei
Champion
24,4
0,1
Brunei
Champion Condensate
65
0,1
Brunei
Brunei LS Blend
32
0,1
Brunei
Brunei Condensate
65
NA
Brunei
Champion Export
23,9
0,12
Cameroon
Kole Marine Blend
34,9
0,3
Cameroon
Lokele
21,5
0,5
Cameroon
Moudi Light
40
NA
Cameroon
Moudi Heavy
21,3
NA
Cameroon
Ebome
32,1
0,35
Cameroon
Cameroon Miscellaneous
NA
NA
Canada
Peace River Light
41
NA
Canada
Peace River Medium
33
NA
Canada
Peace River Heavy
23
NA
Canada
Manyberries
36,5
NA
Canada
Rainbow Light and Medium
40,7
NA
Canada
Pembina
33
NA
Canada
Bells Hill Lake
32
NA
Canada
Fosterton Condensate
63
NA
Canada
Rangeland Condensate
67,3
NA
Canada
Redwater
35
NA
Canada
Lloydminster
20,7
2,8
Canada
Wainwright-Kinsella
23,1
2,3
Canada
Bow River Heavy
26,7
2,4
Canada
Fosterton
21,4
3
Canada
Smiley-Coleville
22,5
2,2
Canada
Midale
29
2,4
Canada
Milk River Pipeline
36
1,4
Canada
Ipl-Mix Sweet
40
0,2
Canada
Ipl-Mix Sour
38
0,5
Canada
Ipl Condensate
55
0,3
Canada
Aurora Light
39,5
0,4
Canada
Aurora Condensate
65
0,3
Canada
Reagan Field
35
0,2
Canada
Synthetic Canada
30,3
1,7
Canada
Cold Lake
13,2
4,1
Canada
Cold Lake Blend
26,9
3
Canada
Canadian Federated
39,4
0,3
Canada
Chauvin
22
2,7
Canada
Gcos
23
NA
Canada
Gulf Alberta L & M
35,1
1
Canada
Light Sour Blend
35
1,2
Canada
Lloyd Blend
22
2,8
Canada
Peace River Condensate
54,9
NA
Canada
Sarnium Condensate
57,7
NA
Canada
Saskatchewan Light
32,9
NA
Canada
Sweet Mixed Blend
38
0,5
Canada
Syncrude
32
0,1
Canada
Rangeland — South L & M
39,5
0,5
Canada
Northblend Nevis
34
NA
Canada
Canadian Common Condensate
55
NA
Canada
Canadian Common
39
0,3
Canada
Waterton Condensate
65,1
NA
Canada
Panuke Condensate
56
NA
Canada
Federated Light and Medium
39,7
2
Canada
Wabasca
23
NA
Canada
Hibernia
37,3
0,37
Canada
BC Light
40
NA
Canada
Boundary
39
NA
Canada
Albian Heavy
21
NA
Canada
Koch Alberta
34
NA
Canada
Terra Nova
32,3
NA
Canada
Echo Blend
20,6
3,15
Canada
Western Canadian Blend
19,8
3
Canada
Western Canadian Select
20,5
3,33
Canada
White Rose
31,0
0,31
Canada
Access
22
NA
Canada
Premium Albian Synthetic Heavy
20,9
NA
Canada
Albian Residuum Blend (ARB)
20,03
2,62
Canada
Christina Lake
20,5
3
Canada
CNRL
34
NA
Canada
Husky Synthetic Blend
31,91
0,11
Canada
Premium Albian Synthetic (PAS)
35,5
0,04
Canada
Seal Heavy (SH)
19,89
4,54
Canada
Suncor Synthetic A (OSA)
33,61
0,178
Canada
Suncor Synthetic H (OSH)
19,53
3,079
Canada
Peace Sour
33
NA
Canada
Western Canadian Resid
20,7
NA
Canada
Christina Dilbit Blend
21,0
NA
Canada
Christina Lake Dilbit
38,08
3,80
Chad
Doba Blend (Early Production)
24,8
0,14
Chad
Doba Blend (Later Production)
20,8
0,17
Chile
Chile Miscellaneous
NA
NA
China
Taching (Daqing)
33
0,1
China
Shengli
24,2
1
China
Beibu
NA
NA
China
Chengbei
17
NA
China
Lufeng
34,4
NA
China
Xijiang
28
NA
China
Wei Zhou
39,9
NA
China
Liu Hua
21
NA
China
Boz Hong
17
0,282
China
Peng Lai
21,8
0,29
China
Xi Xiang
32,18
0,09
Colombia
Onto
35,3
0,5
Colombia
Putamayo
35
0,5
Colombia
Rio Zulia
40,4
0,3
Colombia
Orito
34,9
0,5
Colombia
Cano-Limon
30,8
0,5
Colombia
Lasmo
30
NA
Colombia
Cano Duya-1
28
NA
Colombia
Corocora-1
31,6
NA
Colombia
Suria Sur-1
32
NA
Colombia
Tunane-1
29
NA
Colombia
Casanare
23
NA
Colombia
Cusiana
44,4
0,2
Colombia
Vasconia
27,3
0,6
Colombia
Castilla Blend
20,8
1,72
Colombia
Cupiaga
43,11
0,082
Colombia
South Blend
28,6
0,72
Congo (Brazzaville)
Emeraude
23,6
0,5
Congo (Brazzaville)
Djeno Blend
26,9
0,3
Congo (Brazzaville)
Viodo Marina-1
26,5
NA
Congo (Brazzaville)
Nkossa
47
0,03
Congo (Kinshasa)
Muanda
34
0,1
Congo (Kinshasa)
Congo/Zaire
31,7
0,1
Congo (Kinshasa)
Coco
30,4
0,15
Côte d'Ivoire
Espoir
31,4
0,3
Côte d'Ivoire
Lion Cote
41,1
0,101
Denmark
Dan
30,4
0,3
Denmark
Gorm
33,9
0,2
Denmark
Danish North Sea
34,5
0,26
Dubai
Dubai (Fateh)
31,1
2
Dubai
Margham Light
50,3
0
Ecuador
Oriente
29,2
1
Ecuador
Quito
29,5
0,7
Ecuador
Santa Elena
35
0,1
Ecuador
Limoncoha-1
28
NA
Ecuador
Frontera-1
30,7
NA
Ecuador
Bogi-1
21,2
NA
Ecuador
Napo
19
2
Ecuador
Napo Light
19,3
NA
Egypt
Belayim
27,5
2,2
Egypt
El Morgan
29,4
1,7
Egypt
Rhas Gharib
24,3
3,3
Egypt
Gulf of Suez Mix
31,9
1,5
Egypt
Geysum
19,5
NA
Egypt
East Gharib (J-1)
37,9
NA
Egypt
Mango-1
35,1
NA
Egypt
Rhas Budran
25
NA
Egypt
Zeit Bay
34,1
0,1
Egypt
East Zeit Mix
39
0,87
Equatorial Guinea
Zafiro
30,3
NA
Equatorial Guinea
Alba Condensate
55
NA
Equatorial Guinea
Ceiba
30,1
0,42
Gabon
Gamba
31,8
0,1
Gabon
Mandji
30,5
1,1
Gabon
Lucina Marine
39,5
0,1
Gabon
Oguendjo
35
NA
Gabon
Rabi-Kouanga
34
0,6
Gabon
T'Catamba
44,3
0,21
Gabon
Rabi
33,4
0,06
Gabon
Rabi Blend
34
NA
Gabon
Rabi Light
37,7
0,15
Gabon
Etame Marin
36
NA
Gabon
Olende
17,6
1,54
Gabon
Gabonian Miscellaneous
NA
NA
Georgia
Georgian Miscellaneous
NA
NA
Ghana
Bonsu
32
0,1
Ghana
Salt Pond
37,4
0,1
Guatemala
Coban
27,7
NA
Guatemala
Rubelsanto
27
NA
India
Bombay High
39,4
0,2
Indonesia
Minas (Sumatron Light)
34,5
0,1
Indonesia
Ardjuna
35,2
0,1
Indonesia
Attaka
42,3
0,1
Indonesia
Suri
18,4
0,2
Indonesia
Sanga Sanga
25,7
0,2
Indonesia
Sepinggan
37,9
0,9
Indonesia
Walio
34,1
0,7
Indonesia
Arimbi
31,8
0,2
Indonesia
Poleng
43,2
0,2
Indonesia
Handil
32,8
0,1
Indonesia
Jatibarang
29
0,1
Indonesia
Cinta
33,4
0,1
Indonesia
Bekapai
40
0,1
Indonesia
Katapa
52
0,1
Indonesia
Salawati
38
0,5
Indonesia
Duri (Sumatran Heavy)
21,1
0,2
Indonesia
Sembakung
37,5
0,1
Indonesia
Badak
41,3
0,1
Indonesia
Arun Condensate
54,5
NA
Indonesia
Udang
38
0,1
Indonesia
Klamono
18,7
1
Indonesia
Bunya
31,7
0,1
Indonesia
Pamusian
18,1
0,2
Indonesia
Kerindigan
21,6
0,3
Indonesia
Melahin
24,7
0,3
Indonesia
Bunyu
31,7
0,1
Indonesia
Camar
36,3
NA
Indonesia
Cinta Heavy
27
NA
Indonesia
Lalang
40,4
NA
Indonesia
Kakap
46,6
NA
Indonesia
Sisi-1
40
NA
Indonesia
Giti-1
33,6
NA
Indonesia
Ayu-1
34,3
NA
Indonesia
Bima
22,5
NA
Indonesia
Padang Isle
34,7
NA
Indonesia
Intan
32,8
NA
Indonesia
Sepinggan — Yakin Mixed
31,7
0,1
Indonesia
Widuri
32
0,1
Indonesia
Belida
45,9
0
Indonesia
Senipah
51,9
0,03
Iran
Iranian Light
33,8
1,4
Iran
Iranian Heavy
31
1,7
Iran
Soroosh (Cyrus)
18,1
3,3
Iran
Dorrood (Darius)
33,6
2,4
Iran
Rostam
35,9
1,55
Iran
Salmon (Sassan)
33,9
1,9
Iran
Foroozan (Fereidoon)
31,3
2,5
Iran
Aboozar (Ardeshir)
26,9
2,5
Iran
Sirri
30,9
2,3
Iran
Bahrgansar/Nowruz (SIRIP Blend)
27,1
2,5
Iran
Bahr/Nowruz
25,0
2,5
Iran
Iranian Miscellaneous
NA
NA
Iraq
Basrah Light (Pers. Gulf)
33,7
2
Iraq
Kirkuk (Pers. Gulf)
35,1
1,9
Iraq
Mishrif (Pers. Gulf)
28
NA
Iraq
Bai Hasson (Pers. Gulf)
34,1
2,4
Iraq
Basrah Medium (Pers. Gulf)
31,1
2,6
Iraq
Basrah Heavy (Pers. Gulf)
24,7
3,5
Iraq
Kirkuk Blend (Pers. Gulf)
35,1
2
Iraq
N. Rumalia (Pers. Gulf)
34,3
2
Iraq
Ras el Behar
33
NA
Iraq
Basrah Light (Red Sea)
33,7
2
Iraq
Kirkuk (Red Sea)
36,1
1,9
Iraq
Mishrif (Red Sea)
28
NA
Iraq
Bai Hasson (Red Sea)
34,1
2,4
Iraq
Basrah Medium (Red Sea)
31,1
2,6
Iraq
Basrah Heavy (Red Sea)
24,7
3,5
Iraq
Kirkuk Blend (Red Sea)
34
1,9
Iraq
N. Rumalia (Red Sea)
34,3
2
Iraq
Ratawi
23,5
4,1
Iraq
Basrah Light (Turkey)
33,7
2
Iraq
Kirkuk (Turkey)
36,1
1,9
Iraq
Mishrif (Turkey)
28
NA
Iraq
Bai Hasson (Turkey)
34,1
2,4
Iraq
Basrah Medium (Turkey)
31,1
2,6
Iraq
Basrah Heavy (Turkey)
24,7
3,5
Iraq
Kirkuk Blend (Turkey)
34
1,9
Iraq
N. Rumalia (Turkey)
34,3
2
Iraq
FAO Blend
27,7
3,6
Kazakhstan
Kumkol
42,5
0,07
Kazakhstan
CPC Blend
44,2
0,54
Kuwait
Mina al Ahmadi (Kuwait Export)
31,4
2,5
Kuwait
Magwa (Lower Jurassic)
38
NA
Kuwait
Burgan (Wafra)
23,3
3,4
Libya
Bu Attifel
43,6
0
Libya
Amna (high pour)
36,1
0,2
Libya
Brega
40,4
0,2
Libya
Sirtica
43,3
0,43
Libya
Zueitina
41,3
0,3
Libya
Bunker Hunt
37,6
0,2
Libya
El Hofra
42,3
0,3
Libya
Dahra
41
0,4
Libya
Sarir
38,3
0,2
Libya
Zueitina Condensate
65
0,1
Libya
El Sharara
42,1
0,07
Malaysia
Miri Light
36,3
0,1
Malaysia
Tembungo
37,5
NA
Malaysia
Labuan Blend
33,2
0,1
Malaysia
Tapis
44,3
0,1
Malaysia
Tembungo
37,4
0
Malaysia
Bintulu
26,5
0,1
Malaysia
Bekok
49
NA
Malaysia
Pulai
42,6
NA
Malaysia
Dulang
39
0,037
Mauritania
Chinguetti
28,2
0,51
Mexico
Isthmus
32,8
1,5
Mexico
Maya
22
3,3
Mexico
Olmeca
39
NA
Mexico
Altamira
16
NA
Mexico
Topped Isthmus
26,1
1,72
Netherlands
Alba
19,59
NA
Neutral Zone
Eocene (Wafra)
18,6
4,6
Neutral Zone
Hout
32,8
1,9
Neutral Zone
Khafji
28,5
2,9
Neutral Zone
Burgan (Wafra)
23,3
3,4
Neutral Zone
Ratawi
23,5
4,1
Neutral Zone
Neutral Zone Mix
23,1
NA
Neutral Zone
Khafji Blend
23,4
3,8
Nigeria
Forcados Blend
29,7
0,3
Nigeria
Escravos
36,2
0,1
Nigeria
Brass River
40,9
0,1
Nigeria
Qua Iboe
35,8
0,1
Nigeria
Bonny Medium
25,2
0,2
Nigeria
Pennington
36,6
0,1
Nigeria
Bomu
33
0,2
Nigeria
Bonny Light
36,7
0,1
Nigeria
Brass Blend
40,9
0,1
Nigeria
Gilli Gilli
47,3
NA
Nigeria
Adanga
35,1
NA
Nigeria
Iyak-3
36
NA
Nigeria
Antan
35,2
NA
Nigeria
OSO
47
0,06
Nigeria
Ukpokiti
42,3
0,01
Nigeria
Yoho
39,6
NA
Nigeria
Okwori
36,9
NA
Nigeria
Bonga
28,1
NA
Nigeria
ERHA
31,7
0,21
Nigeria
Amenam Blend
39
0,09
Nigeria
Akpo
45,17
0,06
Nigeria
EA
38
NA
Nigeria
Agbami
47,2
0,044
Norway
Ekofisk
43,4
0,2
Norway
Tor
42
0,1
Norway
Statfjord
38,4
0,3
Norway
Heidrun
29
NA
Norway
Norwegian Forties
37,1
NA
Norway
Gullfaks
28,6
0,4
Norway
Oseberg
32,5
0,2
Norway
Norne
33,1
0,19
Norway
Troll
28,3
0,31
Norway
Draugen
39,6
NA
Norway
Sleipner Condensate
62
0,02
Oman
Oman Export
36,3
0,8
Papua New Guinea
Kutubu
44
0,04
Peru
Loreto
34
0,3
Peru
Talara
32,7
0,1
Peru
High Cold Test
37,5
NA
Peru
Bayovar
22,6
NA
Peru
Low Cold Test
34,3
NA
Peru
Carmen Central-5
20,7
NA
Peru
Shiviyacu-23
20,8
NA
Peru
Mayna
25,7
NA
Philippines
Nido
26,5
NA
Philippines
Philippines Miscellaneous
NA
NA
Qatar
Dukhan
41,7
1,3
Qatar
Qatar Marine
35,3
1,6
Qatar
Qatar Land
41,4
NA
Ras Al Khaimah
Rak Condensate
54,1
NA
Ras Al Khaimah
Ras Al Khaimah Miscellaneous
NA
NA
Russia
Urals
31
2
Russia
Russian Export Blend
32,5
1,4
Russia
M100
17,6
2,02
Russia
M100 Heavy
16,67
2,09
Russia
Siberian Light
37,8
0,4
Russia
E4 (Gravenshon)
19,84
1,95
Russia
E4 Heavy
18
2,35
Russia
Purovsky Condensate
64,1
0,01
Russia
Sokol
39,7
0,18
Saudi Arabia
Light (Pers. Gulf)
33,4
1,8
Saudi Arabia
Heavy (Pers. Gulf) (Safaniya)
27,9
2,8
Saudi Arabia
Medium (Pers. Gulf) (Khursaniyah)
30,8
2,4
Saudi Arabia
Extra Light (Pers. Gulf) (Berri)
37,8
1,1
Saudi Arabia
Light (Yanbu)
33,4
1,2
Saudi Arabia
Heavy (Yanbu)
27,9
2,8
Saudi Arabia
Medium (Yanbu)
30,8
2,4
Saudi Arabia
Berri (Yanbu)
37,8
1,1
Saudi Arabia
Medium (Zuluf/Marjan)
31,1
2,5
Sharjah
Mubarek Sharjah
37
0,6
Sharjah
Sharjah Condensate
49,7
0,1
Singapore
Rantau
50,5
0,1
Spain
Amposta Marina North
37
NA
Spain
Casablanca
34
NA
Spain
El Dorado
26,6
NA
Syria
Syrian Straight
15
NA
Syria
Thayyem
35
NA
Syria
Omar Blend
38
NA
Syria
Omar
36,5
0,1
Syria
Syrian Light
36
0,6
Syria
Souedie
24,9
3,8
Thailand
Erawan Condensate
54,1
NA
Thailand
Sirikit
41
NA
Thailand
Nang Nuan
30
NA
Thailand
Bualuang
27
NA
Thailand
Benchamas
42,4
0,12
Trinidad and Tobago
Galeota Mix
32,8
0,3
Trinidad and Tobago
Trintopec
24,8
NA
Trinidad and Tobago
Land/Trinmar
23,4
1,2
Trinidad and Tobago
Calypso Miscellaneous
30,84
0,59
Tunisia
Zarzaitine
41,9
0,1
Tunisia
Ashtart
29
1
Tunisia
El Borma
43,3
0,1
Tunisia
Ezzaouia-2
41,5
NA
Turkey
Turkish Miscellaneous
NA
NA
Ukraine
Ukraine Miscellaneous
NA
NA
United Kingdom
Auk
37,2
0,5
United Kingdom
Beatrice
38,7
0,05
United Kingdom
Brae
33,6
0,7
United Kingdom
Buchan
33,7
0,8
United Kingdom
Claymore
30,5
1,6
United Kingdom
S.V. (Brent)
36,7
0,3
United Kingdom
Tartan
41,7
0,6
United Kingdom
Tern
35
0,7
United Kingdom
Magnus
39,3
0,3
United Kingdom
Dunlin
34,9
0,4
United Kingdom
Fulmar
40
0,3
United Kingdom
Hutton
30,5
0,7
United Kingdom
N.W. Hutton
36,2
0,3
United Kingdom
Maureen
35,5
0,6
United Kingdom
Murchison
38,8
0,3
United Kingdom
Ninian Blend
35,6
0,4
United Kingdom
Montrose
40,1
0,2
United Kingdom
Beryl
36,5
0,4
United Kingdom
Piper
35,6
0,9
United Kingdom
Forties
36,6
0,3
United Kingdom
Brent Blend
38
0,4
United Kingdom
Flotta
35,7
1,1
United Kingdom
Thistle
37
0,3
United Kingdom
S.V. (Ninian)
38
0,3
United Kingdom
Argyle
38,6
0,2
United Kingdom
Heather
33,8
0,7
United Kingdom
South Birch
38,6
NA
United Kingdom
Wytch Farm
41,5
NA
United Kingdom
Cormorant North
34,9
0,7
United Kingdom
Cormorant South (Cormorant ‘A’)
35,7
0,6
United Kingdom
Alba
19,2
NA
United Kingdom
Foinhaven
26,3
0,38
United Kingdom
Schiehallion
25,8
NA
United Kingdom
Captain
19,1
0,7
United Kingdom
Harding
20,7
0,59
US Alaska
ANS
NA
NA
US Colorado
Niobrara
NA
NA
US New Mexico
Four Corners
NA
NA
US North Dakota
Bakken
NA
NA
US North Dakota
North Dakota Sweet
NA
NA
US Texas
WTI
NA
NA
US Texas
Eagle Ford
NA
NA
US Utah
Covenant
NA
NA
US Federal OCS
Beta
NA
NA
US Federal OCS
Carpinteria
NA
NA
US Federal OCS
Dos Cuadras
NA
NA
US Federal OCS
Hondo
NA
NA
US Federal OCS
Hueneme
NA
NA
US Federal OCS
Pescado
NA
NA
US Federal OCS
Point Arguello
NA
NA
US Federal OCS
Point Pedernales
NA
NA
US Federal OCS
Sacate
NA
NA
US Federal OCS
Santa Clara
NA
NA
US Federal OCS
Sockeye
NA
NA
Uzbekistan
Uzbekistan Miscellaneous
NA
NA
Venezuela
Jobo (Monagas)
12,6
2
Venezuela
Lama Lamar
36,7
1
Venezuela
Mariago
27
1,5
Venezuela
Ruiz
32,4
1,3
Venezuela
Tucipido
36
0,3
Venezuela
Venez Lot 17
36,3
0,9
Venezuela
Mara 16/18
16,5
3,5
Venezuela
Tia Juana Light
32,1
1,1
Venezuela
Tia Juana Med 26
24,8
1,6
Venezuela
Officina
35,1
0,7
Venezuela
Bachaquero
16,8
2,4
Venezuela
Cento Lago
36,9
1,1
Venezuela
Lagunillas
17,8
2,2
Venezuela
La Rosa Medium
25,3
1,7
Venezuela
San Joaquin
42
0,2
Venezuela
Lagotreco
29,5
1,3
Venezuela
Lagocinco
36
1,1
Venezuela
Boscan
10,1
5,5
Venezuela
Leona
24,1
1,5
Venezuela
Barinas
26,2
1,8
Venezuela
Sylvestre
28,4
1
Venezuela
Mesa
29,2
1,2
Venezuela
Ceuta
31,8
1,2
Venezuela
Lago Medio
31,5
1,2
Venezuela
Tigre
24,5
NA
Venezuela
Anaco Wax
41,5
0,2
Venezuela
Santa Rosa
49
0,1
Venezuela
Bombai
19,6
1,6
Venezuela
Aguasay
41,1
0,3
Venezuela
Anaco
43,4
0,1
Venezuela
BCF-Bach/Lag17
16,8
2,4
Venezuela
BCF-Bach/Lag21
20,4
2,1
Venezuela
BCF-21,9
21,9
NA
Venezuela
BCF-24
23,5
1,9
Venezuela
BCF-31
31
1,2
Venezuela
BCF Blend
34
1
Venezuela
Bolival Coast
23,5
1,8
Venezuela
Ceuta/Bach 18
18,5
2,3
Venezuela
Corridor Block
26,9
1,6
Venezuela
Cretaceous
42
0,4
Venezuela
Guanipa
30
0,7
Venezuela
Lago Mix Med.
23,4
1,9
Venezuela
Larosa/Lagun
23,8
1,8
Venezuela
Menemoto
19,3
2,2
Venezuela
Cabimas
20,8
1,8
Venezuela
BCF-23
23
1,9
Venezuela
Oficina/Mesa
32,2
0,9
Venezuela
Pilon
13,8
2
Venezuela
Recon (Venez)
34
NA
Venezuela
102 Tj (25)
25
1,6
Venezuela
Tjl Cretaceous
39
0,6
Venezuela
Tia Juana Pesado (Heavy)
12,1
2,7
Venezuela
Mesa-Recon
28,4
1,3
Venezuela
Oritupano
19
2
Venezuela
Hombre Pintado
29,7
0,3
Venezuela
Merey
17,4
2,2
Venezuela
Lago Light
41,2
0,4
Venezuela
Laguna
11,2
0,3
Venezuela
Bach/Cueta Mix
24
1,2
Venezuela
Bachaquero 13
13
2,7
Venezuela
Ceuta — 28
28
1,6
Venezuela
Temblador
23,1
0,8
Venezuela
Lagomar
32
1,2
Venezuela
Taparito
17
NA
Venezuela
BCF-Heavy
16,7
NA
Venezuela
BCF-Medium
22
NA
Venezuela
Caripito Blend
17,8
NA
Venezuela
Laguna/Ceuta Mix
18,1
NA
Venezuela
Morichal
10,6
NA
Venezuela
Pedenales
20,1
NA
Venezuela
Quiriquire
16,3
NA
Venezuela
Tucupita
17
NA
Venezuela
Furrial-2 (E. Venezuela)
27
NA
Venezuela
Curazao Blend
18
NA
Venezuela
Santa Barbara
36,5
NA
Venezuela
Cerro Negro
15
NA
Venezuela
BCF22
21,1
2,11
Venezuela
Hamaca
26
1,55
Venezuela
Zuata 10
15
NA
Venezuela
Zuata 20
25
NA
Venezuela
Zuata 30
35
NA
Venezuela
Monogas
15,9
3,3
Venezuela
Corocoro
24
NA
Venezuela
Petrozuata
19,5
2,69
Venezuela
Morichal 16
16
NA
Venezuela
Guafita
28,6
0,73
Vietnam
Bach Ho (White Tiger)
38,6
0
Vietnam
Dai Hung (Big Bear)
36,9
0,1
Vietnam
Rang Dong
37,7
0,5
Vietnam
Ruby
35,6
0,08
Vietnam
Su Tu Den (Black Lion)
36,8
0,05
Yemen
North Yemeni Blend
40,5
NA
Yemen
Alif
40,4
0,1
Yemen
Maarib Lt.
49
0,2
Yemen
Masila Blend
30-31
0,6
Yemen
Shabwa Blend
34,6
0,6
Any
Oil shale
NA
NA
Any
Shale oil
NA
NA
Any
Natural Gas: piped from source
NA
NA
Any
Natural Gas: from LNG
NA
NA
Any
Shale gas: piped from source
NA
NA
Any
Coal
NA
NA
(1) Commission Regulation (EC) No 684/2009 of 24 July 2009 implementing Council Directive 2008/118/EC as regards the computerised procedures for the movement of excise goods under suspension of excise duty (OJ L 197, 29.7.2009, p. 24).
(2) Council Directive 2008/118/EC of 16 December 2008 concerning the general arrangements for excise duty and repealing Directive 92/12/EEC (OJ L 9, 14.1.2009, p. 12).
(3) The JEC consortium brings together the European Commission Joint Research Centre (JRC), EUCAR (European Council for Automotive R&D) and CONCAWE (the oil companies' European association for environment, health and safety in refining and distribution).
(4) http://iet.jrc.ec.europa.eu/about-jec/sites/about-jec/files/documents/report_2013/wtt_report_v4_july_2013_final.pdf
(5) Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community's integrated approach to reduce CO2 emissions from light-duty vehicles (OJ L 140, 5.6.2009, p. 1).
(6) Commission Regulation (EU) No 600/2012 of 21 June 2012 on the verification of greenhouse gas emission reports and tonne-kilometre reports and the accreditation of verifiers pursuant to Directive 2003/87/EC of the European Parliament and of the Council (OJ L 181, 12.7.2012, p. 1).
(7) Commission Regulation (EU) No 601/2012 of 21 June 2012 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council (OJ L 181, 12.7.2012, p. 30).
(8) Council Regulation (EC) No 2964/95 of 20 December 1995 introducing registration for crude oil imports and deliveries in the Community (OJ L 310, 22.12.1995, p. 5).
(9) Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1).
(10) Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (OJ L 304, 14.11.2008, p. 1).
(11) Regulation (EU) No 525/2013 of the European Parliament and of the Council of 21 May 2013 on a mechanism for monitoring and reporting greenhouse gas emissions and for reporting other information at national and Union level relevant to climate change and repealing Decision No 280/2004/EC (OJ L 165, 18.6.2013, p. 13).
(12) Commission Delegated Regulation (EU) No 666/2014 of 12 March 2014 establishing substantive requirements for a Union inventory system and taking into account changes in the global warming potentials and internationally agreed inventory guidelines pursuant to Regulation (EU) No 525/2013 of the European Parliament and of the Council (OJ L 179, 19.6.2014, p. 26).
ANNEX II
CALCULATION OF THE FUEL BASELINE STANDARD OF FOSSIL FUELS
Calculation method
(a)
The fuel baseline standard is calculated based on Union average fossil fuel consumption of petrol, diesel, gasoil, LPG and CNG, as follows:
where:
‘x’ represents the different fuels and energy falling within the scope of this Directive and as defined in the table below;
‘GHGix’ is the greenhouse gas intensity of the annual supply sold on the market of fuel ‘x’ or energy falling within the scope of this Directive expressed in gCO2eq/MJ. The values for fossil fuels presented in point 5 of Part 2 of Annex I are used;
‘MJx’ is the total energy supplied and converted from reported volumes of fuel ‘x’ expressed in mega joules.
(b)
Consumption data
The consumption data used for calculation of the value is as follows:
Fuel
Energy Consumption (MJ)
Source
diesel
7 894 969 × 106
2010 Member States reporting to the UNFCCC
non-road gasoil
240 763 × 106
petrol
3 844 356 × 106
LPG
217 563 × 106
CNG
51 037 × 106
Greenhouse gas intensity
The fuel baseline standard for 2010 shall be: 94,1 gCO2eq/MJ
ANNEX III
MEMBER STATE REPORTING TO THE COMMISSION
1.
By 31 December each year, Member States are to report the data listed in point 3. These data must be reported for all fuel and energy placed on the market in each Member State. Where multiple biofuels are blended with fossil fuels, the data for each biofuel must be provided.
2.
The data listed in point 3 are to be reported separately for fuel or energy placed on the market by suppliers within a given Member State (including joint suppliers operating in a single Member State).
3.
For each fuel and energy, Member States are to report the following data to the Commission, as aggregated according to point 2 and as defined in Annex I:
(a)
fuel or energy type;
(b)
volume or quantity of fuel or electricity;
(c)
greenhouse gas intensity;
(d)
UERs;
(e)
origin;
(f)
place of purchase.
ANNEX IV
TEMPLATE FOR REPORTING INFORMATION FOR CONSISTENCY OF THE REPORTED DATA
Fuel — Single Suppliers
Entry
Joint Reporting (YES/NO)
Country
Supplier1
Fuel type7
Fuel CN code7
Quantity2
Average GHG intensity
Upstream Emission Reduction5
Reduction on 2010 average
by litres
by energy
1
CN code
GHG intensity4
Feedstock
CN code
GHG intensity4
sustainable (YES/NO)
Component F.1 (Fossil Fuel Component)
Component B.1 (Biofuel Component)
Component F.n (Fossil Fuel Component)
Component B.m (Biofuel Component)
k
CN code2
GHG intensity4
Feedstock
CN code2
GHG intensity4
sustainable (YES/NO)
Component F.1 (Fossil Fuel Component)
Component B.1 (Biofuel Component)
Component F.n (Fossil Fuel Component)
Component B.m (Biofuel Component)
Fuel — Joint Suppliers
Entry
Joint Reporting (YES/NO)
Country
Supplier1
Fuel type7
Fuel CN code7
Quantity2
Average GHG intensity
Upstream Emission Reduction5
Reduction on 2010 average
by litres
by energy
I
YES
YES
Subtotal
CN code
GHG intensity4
Feedstock
CN code
GHG intensity4
sustainable (YES/NO)
Component F.1 (Fossil Fuel Component)
Component B.1 (Biofuel Component)
Component F.n (Fossil Fuel Component)
Component B.m (Biofuel Component)
x
YES
YES
Subtotal
CN code2
GHG intensity4
Feedstock
CN code2
GHG intensity4
sustainable (YES/NO)
Component F.1 (Fossil Fuel Component)
Component B.1 (Biofuel Component)
Component F.n (Fossil Fuel Component)
Component B.m (Biofuel Component)
Electricity
Joint Reporting
Country
Supplier1
Energy type7
Quantity6
GHG intensity
Reduction on 2010 average
by energy
NO
Joint Supplier Information
Country
Supplier1
Energy type7
Quantity6
GHG intensity
Reduction on 2010 average
by energy
YES
YES
Subtotal
Origin — Single Suppliers8
Entry 1
component F.1
Entry 1
component F.n
Entry k
component F.1
Entry k
component F.n
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Entry 1
component B.1
Entry 1
component B.m
Entry k
component B.1
Entry k
component B.m
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Origin — Joint Suppliers8
Entry l
component F.1
Entry l
component F.n
Entry X
component F.1
Entry X
component F.n
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Feedstock Trade Name
API gravity3
Tonnes
Entry l
component B.1
Entry l
component B.m
Entry X
component B.1
Entry X
component B.m
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Bio Pathway
API gravity3
Tonnes
Place of Purchase9
Entry
Component
Refinery/ Processing Facility Names
Country
Refinery/ Processing Facility Names
Country
Refinery/ Processing Facility Names
Country
Refinery/ Processing Facility Names
Country
Refinery/ Processing Facility Names
Country
Refinery/ Processing Facility Names
Country
1
F.1
1
F.n
1
B.1
1
B.m
k
F.1
k
F.n
k
B.1
k
B.m
l
F.1
l
F.n
l
B.1
l
B.m
X
F.1
X
F.n
X
B.1
X
B.m
Total energy reported and reduction achieved per Member State
Volume (by energy)10
GHG intensity
Reduction on 2010 average
Format Notes
The template for supplier reporting is identical to the template for Member State reporting.
Shaded cells do not have to be filled in.
1.
Supplier identification is defined in point 3(a) of Part 1 of Annex I;
2.
Quantity of fuel is defined in point 3(c) of Part 1 of Annex I;
3.
American Petroleum Institute (API) gravity is defined pursuant to testing method ASTM D287;
4.
Greenhouse gas intensity is defined in point 3(e) of Part 1 of Annex I;
5.
UER is defined in point 3(d) of Part 1 of Annex I; reporting specifications are defined in point 1 of Part 2 of Annex I;
6.
Quantity of electricity is defined in point 6 of Part 2 of Annex I;
7.
Fuel types and corresponding CN codes are defined in point 3(b) of Part 1 of Annex I;
8.
Origin is defined in points 2 and 4 of Part 2 of Annex I;
9.
Place of Purchase is defined in points 3 and 4 of Part 2 of Annex I;
10.
Total quantity of energy (fuel and electricity) consumed.