Commission Implementing Regulation (EU) No 136/2012 of 16 February 2012 concerning the authorisation of sodium bisulphate as feed additive for pets and other non-food producing animals Text with EEA relevance
136/2012 • 32012R0136
Legal Acts - Regulations
- Inbound citations: 3
- •
- Cited paragraphs: 0
- •
- Outbound citations: 4
17.2.2012
EN
Official Journal of the European Union
L 46/33
COMMISSION IMPLEMENTING REGULATION (EU) No 136/2012
of 16 February 2012
concerning the authorisation of sodium bisulphate as feed additive for pets and other non-food producing animals
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (1), and in particular Article 9(2) thereof,
Whereas:
(1)
Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation.
(2)
(3)
The application concerns the authorisation of sodium bisulphate as a feed additive for pets and other non-food producing animals, to be classified in the additive categories ‘technological additives’ and ‘sensory additives’.
(4)
The European Food Safety Authority (‘the Authority’) concluded in its opinion of 13 October 2011 (2) that, under the proposed conditions of use, sodium bisulphate does not have an adverse effect on animal health, human health or the environment, and that its use is considered efficacious as acidity regulator in feed for pets and other non food-producing animals, and as flavouring substance in feed for pets. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
(5)
The assessment of sodium bisulphate shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of this preparation should be authorised as specified in the Annexes to this Regulation.
(6)
The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health,
HAS ADOPTED THIS REGULATION:
Article 1
The preparation specified in Annex I, belonging to the additive category ‘technological additives’ and to the functional group ‘acidity regulator’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 2
The preparation specified in Annex II, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 3
This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 16 February 2012.
For the Commission
The President
José Manuel BARROSO
(1) OJ L 268, 18.10.2003, p. 29.
(2) EFSA Journal 2011; 9(11):2415.
ANNEX I
Identification number of the additive
Name of the holder of authorisation
Additive
Composition, chemical formula, description, analytical method
Species or category of animal
Maximum age
Minimum content
Maximum content
Other provisions
End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of technological additives. Functional group: acidity regulators
1j514ii
—
Sodium bisulphate
Additive composition
Sodium bisulphate: ≥ 95,2 %
Characterisation of the active substance
Sodium bisulphate CAS No 7681-38-1
NaHSO4
Na 19,15 %
SO4 80,01 %
Produced by chemical synthesis
Method of analysis (1)
Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution.
Pets and other non-food producing animals
—
—
5 000
1.
In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.
2.
For safety: breathing protection, eye protection and gloves shall be used during handling.
3.
The mixture of different sources of sodium bisulphate must not exceed the maximum permitted level in complete feedingstuff of 5 000 mg/kg complete feedingstuff.
8 March 2022
(1) Details of the analytical methods are available at the following address of the Reference Laboratory: http://irmm.jrc.ec.europa.eu/EURLs/EURL_feed_additives/Pages/index.aspx
ANNEX II
Identification number of the additive
Name of the holder of authorisation
Additive
Composition, chemical formula, description, analytical method
Species or category of animal
Maximum age
Minimum content
Maximum content
Other provisions
End of period of authorisation
mg/kg of complete feedingstuff with a moisture content of 12 %
Category of sensory additives. Functional group: flavouring compounds
1j514ii
—
Sodium bisulphate
Additive composition
Sodium bisulphate: ≥ 95,2 %
Characterisation of the active substance
Sodium bisulphate CAS No 7681-38-1
NaHSO4
Na 19,15 %
SO4 80,01 %
Produced by chemical synthesis
Method of analysis (1)
Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution.
Pets
—
—
5 000
1.
In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.
2.
For safety: breathing protection, eye protection and gloves shall be used during handling.
3.
The mixture of different sources of sodium bisulphate must not exceed the maximum permitted level in complete feedingstuff of 5 000 mg/kg complete feedingstuff.
8 March 2022
(1) Details of the analytical methods are available at the following address of the Reference Laboratory: http://irmm.jrc.ec.europa.eu/EURLs/EURL_feed_additives/Pages/index.aspx
LEXI - AI Legal Assistant
