2.3.2005

EN

Official Journal of the European Union

L 56/8

COMMISSION REGULATION (EC) No 356/2005

of 1 March 2005

laying down detailed rules for the marking and identification of passive fishing gear and beam trawls

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Regulation (EEC) No 2847/93 of 12 October 1993 establishing a control system applicable to the common fisheries policy (1), and in particular Articles 5(c) and 20a(3) thereof,

Whereas:

(1)

The monitoring and inspection of fishing activities, in particular of certain technical conservation measures, specifying inter alia, mesh sizes, limitations of fishing times and other characteristics of passive fishing gear is necessary. For this purpose, the fishing gear used by fishing vessels should be easy to identify and to check. In order to ensure compliance with those requirements, detailed rules should be laid down for the marking and identification of certain fishing gear utilised in Community waters.

(2)

It is appropriate, for a proper implementation of the present regulation, that the use of fishing gears which does not comply with the requirements it lays down is prohibited, as well as the carrying on board of gears which do not comply with certain provisions of the Regulation.

(3)

The measures provided for in this Regulation are in accordance with the opinion of the Management Committee for Fishery and Aquaculture,

HAS ADOPTED THIS REGULATION:

CHAPTER I

GENERAL PROVISIONS

Article 1

Subject matter

This Regulation lays down detailed rules for the marking and identification of passive fishing gear and beam trawls.

Article 2

Scope

1. This Regulation shall apply to vessels fishing in Community waters.

2. This Regulation shall not apply within the 12 nautical miles measured from the base lines of the Coastal Member State.

Article 3

Definitions

For the purposes of this Regulation, the following definitions shall apply:

(a)

‘passive gear’ means:

(i)

longlines;

(ii)

gillnets, entangling nets, trammel nets, drifting gillnets which may consist of one or more separate nets which are rigged with top, bottom and connecting ropes, and may be equipped with anchoring, floating and navigational gear;

(b)

‘beam trawls’ mean trawls which are towed from outrigger booms.

Article 4

Prohibition

1. It shall be prohibited to use for fishing passive gear, buoys and beam trawls which are not marked and identifiable in accordance with the provisions of this Regulation.

2. It shall be prohibited to carry on board:

(a)

beams of a beam trawl which do not display the external registration letters and numbers in accordance with Article 5;

(b)

passive gear which is not labelled in accordance with Article 7;

(c)

buoys which are not marked in accordance with Article 10.

CHAPTER II

BEAM TRAWLS

Article 5

Responsibilities concerning beam trawls

The master of a fishing vessel or his representative shall ensure that each assembled beam of a beam trawl carried on board or used for fishing shall clearly display the external registration letters and numbers of the vessel to which they belong on the beam or shoes of each beam.

CHAPTER III

PASSIVE GEAR

Article 6

Responsibilities concerning passive gear

The master of a fishing vessel or his representative shall ensure that each passive gear — carried on board or used for fishing is clearly marked and identifiable, in accordance with the provisions of this Chapter.

Article 7

Display of identification

Each passive gear used for fishing shall permanently display the external registration letters and numbers displayed on the hull of the vessel to which they belong:

(a)

on a label attached to the upper first row at both ends of each passive gear;

(b)

for passive gear extending more than one nautical mile, on labels attached to the upper first row of the passive gear at regular intervals not exceeding one nautical mile so that no part of the passive gear extending more than one nautical mile shall be left unmarked.

Article 8

Labels

1. Each label shall be:

(a)

made of durable material;

(b)

securely fitted to the gear;

(c)

at least 65 millimetres broad;

(d)

at least 75 millimetres long.

2. The letters and numbers displayed on each label shall not be effaced, altered or allowed to become illegible.

CHAPTER IV

BUOYS

Article 9

Responsibilities concerning buoys

The master of a fishing vessel or his representative shall ensure that two end marker buoys and intermediary marker buoys, rigged in accordance with the Annex, are fixed to each passive gear used for fishing and are deployed in accordance with the provisions of this Chapter.

Article 10

Display of identification

1. Each end marker buoy and intermediary buoy shall display the external registration letters and numbers displayed on the hull of the vessel to which they belong as follows:

(a)

letters and numbers shall be displayed as high above the water as possible so as to be clearly visible;

(b)

in a colour contrasting with the surface on which they are displayed.

2. The letters and numbers displayed on the marker buoy shall not be effaced, altered or allowed to become illegible.

Article 11

Cords

1. The cords linking the buoys to the passive gear shall be of submersible material, or shall be weighted down.

2. The cords linking the end marker buoys to each gear shall be fixed at the ends of that gear.

Article 12

End marker buoys

1. End marker buoys shall be deployed so that each end of the gear may be determined at any time.

2. The mast of each end marker buoy shall have a height of at least 1,5 metres above the sea level measured from the top of the float.

3. End marker buoys shall be coloured, but may not be red or green.

4. Each end marker buoy shall include:

(a)

one or two rectangular flag(s) whose side measures at least 40 centimetres; where two flags are required on the same buoy, the distance between them shall be at least 20 centimetres; the distance between the water and the first flag shall be at least 80 centimetres; flags indicating the extremities of the same net shall be of the same colour, which may not be white, and of the same size;

(b)

one or two lights, which shall be yellow and give one flash each five-second (F1 Y5s) and be visible from a distance of at least two nautical miles;

(c)

a top sign on the top of the buoy which shall be a sphere of a diameter of at least 25 centimetres topped with one or two luminous band which shall be neither red nor green and shall be at least 6 centimetres broad. A spherical radar reflector may be used as the mark on top of the buoy;

(d)

radar reflectors giving an echo of at least two nautical miles.

Article 13

Fixing of end marker buoys

End marker buoys shall be fixed to passive gear in the following way:

(a)

the buoy in the western sector (meaning the half compass circle from south through west to and including north) shall be rigged with two flags, two striped luminous bands, two lights and a label in accordance with Article 8;

(b)

the buoy in the eastern sector (meaning the half compass circle from north through east to and including the south) shall be rigged with one flag one striped luminous band, one light and a label in accordance with Article 8.

The label shall contain the information contained in Article 10.

Article 14

Intermediary marker buoys

1. Intermediary marker buoys shall be fixed to passive gear extending more than 1 nautical mile.

2. Intermediary marker buoys shall be deployed at distances of not more than 1 nautical mile so that no part of the gear extending 1 nautical mile or more shall be left unmarked.

3. Intermediary marker buoys shall have the same characteristics as those of the end marker buoy in the eastern sector except for the following:

(a)

the flags shall be white;

(b)

every fifth intermediary marker buoys shall be fitted with a radar reflector giving an echo at least two nautical miles.

CHAPTER V

FINAL PROVISION

Article 15

This Regulation shall enter into force on the seventh day following its publication in the Official Journal of the European Union.

It shall apply from 1 October 2005.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 1 March 2005.

For the Commission

Joe BORG

Member of the Commission

(1) OJ L 261, 20.10.1993, p. 1. Regulation as last amended by Regulation (EC) No 1954/2003 (OJ L 289, 7.11.2003, p. 1).

ANNEX

CHARACTERISTICS OF END MARKER AND INTERMEDIARY MARKER BUOYS