Commission Directive 2002/17/EC of 21 February 2002 amending Directive 90/128/EEC relating to plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance)
2002/17/EC • 32002L0017
Legal Acts - L
- 4 Inbound citations:
- •
- 0 Cited paragraphs:
- •
- 17 Outbound citations:
Avis juridique important
Commission Directive 2002/17/EC of 21 February 2002 amending Directive 90/128/EEC relating to plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance) Official Journal L 058 , 28/02/2002 P. 0019 - 0024
Commission Directive 2002/17/EC of 21 February 2002 amending Directive 90/128/EEC relating to plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance) THE COMMISSION OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Community, Having regard to Council Directive 89/109/EEC of 21 December 1988 on the approximation of the laws of the Member States relating to materials and articles intended to come into contact with foodstuffs(1), and in particular Article 3 thereof, After consulting the Scientific Committee on Food, Whereas: (1) On the basis of the new information available to the Scientific Committee on Food, certain monomers provisionally permitted at national level as well as other monomers requested for use following the adoption of Commission Directive 90/128/EEC of 23 February 1990 relating to plastic materials and articles intended to come into contact with foodstuffs(2), as last amended by Directive 2001/62/EC(3), may be included in the Community list of permitted substances in Annex II to Directive 90/128/EEC. (2) Annex III to Directive 90/128/EEC contains an incomplete list of additives which may be used in the manufacture of plastics materials and articles. That list should be amended so as to include other additives evaluated by the Scientific Committee on Food. (3) For certain substances, the restrictions already established at Community level should be amended on the basis of the information available. (4) The current list of additives is an incomplete list inasmuch as it does not contain all the substances, which are currently accepted in one or more Member States. Accordingly, these substances continue to be regulated by national laws only pending a decision on inclusion in the Community list. (5) This Directive establishes specifications for only a few substances. The other substances, which may require specifications, therefore remain regulated in this respect by national laws only pending a decision at Community level. (6) Directive 90/128/EEC should therefore be amended accordingly. (7) The measures provided for in this Directive are in accordance with the opinion of the Standing Committee on Foodstuffs, HAS ADOPTED THIS DIRECTIVE: Article 1 Annexes II, III, V and VI to Directive 90/128/EEC are amended as set out in the Annex to this Directive. Article 2 Member States shall adopt and publish, by 28 February 2003 at the latest, the provisions necessary to comply with this Directive. They shall forthwith inform the Commission thereof. They shall apply those provisions in such a way as to: (a) permit the trade in and use of plastic materials and articles intended to come into contact with foodstuffs and complying with this Directive, from 1 March 2003; (b) prohibit the manufacture and importation into the Community of plastic materials and articles intended to come into contact with foodstuffs and which do not comply with this Directive, from 1 March 2004. However, for materials and articles which contain divinylbenzene and do not comply with the restriction set in this Directive, Member States shall prohibit their manufacture and importation into the Community as from 1 March 2003. When Member States adopt these provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made. Article 3 This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Communities. Article 4 This Directive is addressed to the Member States. Done at Brussels, 21 February 2002. For the Commission David Byrne Member of the Commission (1) OJ L 40, 11.2.1989, p. 38. (2) OJ L 75, 21.3.1990, p. 19. (3) OJ L 221, 17.8.2001, p. 18. ANNEX The Annexes to Directive 90/128/EEC are amended as follows: 1. Annex II is amended as follows: (a) In point 8: (i) The definition of QM(T) is replaced by the following: "QM(T) = Maximum permitted quantity of the "residual" substance in the material or article expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the quantity of the substance in the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;" (ii) the following text is inserted after QM(T): "QMA = Maximum permitted quantity of the "residual" substance in the finished material or article expressed as mg per 6 dm2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method; QMA(T) = Maximum permitted quantity of the "residual" substance in the material or article expressed as mg of total of moiety or substance(s) indicated per 6 dm2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;" (iii) The definitions of SML and SML(T) are replaced by the following: "SML = Specific migration limit in food or in food simulant, unless it is specified otherwise. For the purpose of this Directive the specific migration of the substance should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method; SML(T) = Specific migration limit in food or in food simulant expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the specific migration of the substances should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method." (b) Section A is amended as follows: (i) The following monomers and other starting substances are inserted: >TABLE> (ii) For the following monomers and other starting substances the content of the column "Restrictions and/or specifications" is replaced by the following: >TABLE> (iii) The following monomers and other starting substances are transferred from Section B to Section A: >TABLE> 2. Annex III is amended as follows: (a) The table of Section A is amended as follows: (i) The following additives are inserted: >TABLE> (ii) For the following additives the content of column "Restriction and/or specifications" is replaced by the following: >TABLE> (iii) The following additive is deleted >TABLE> (b) The table of Section B is amended as follows: (i) The following additives are inserted: >TABLE> (ii) For the following additives the content of column "Restriction and/or specifications" is replaced by the following: >TABLE> 3. Annex V is amended as follows: The following specifications are inserted in the table of Part B: >TABLE> 4. Annex VI is amended as follows: (a) The notes (12) and (13) are replaced by the following: "(12) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 36720, 36800, 36840 and 92000. (13) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 39090 and 39120." (b) The following notes are added: "(23) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 13620, 36840, 40320 and 87040. (24) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 13720 and 40580. (25) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 16650 and 51570. (26) QM(T) in this specific case means that the restriction shall not be exceeded by the sum of the residual quantities of the following substances mentioned as PM/REF. Nos: 14950, 15700, 16240, 16570, 16600, 16630, 18640, 19110, 22332, 22420, 22570, 25210, 25240, 25270."
Commission Directive 2002/17/EC
of 21 February 2002
amending Directive 90/128/EEC relating to plastic materials and articles intended to come into contact with foodstuffs
(Text with EEA relevance)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Council Directive 89/109/EEC of 21 December 1988 on the approximation of the laws of the Member States relating to materials and articles intended to come into contact with foodstuffs(1), and in particular Article 3 thereof,
After consulting the Scientific Committee on Food,
Whereas:
(1) On the basis of the new information available to the Scientific Committee on Food, certain monomers provisionally permitted at national level as well as other monomers requested for use following the adoption of Commission Directive 90/128/EEC of 23 February 1990 relating to plastic materials and articles intended to come into contact with foodstuffs(2), as last amended by Directive 2001/62/EC(3), may be included in the Community list of permitted substances in Annex II to Directive 90/128/EEC.
(2) Annex III to Directive 90/128/EEC contains an incomplete list of additives which may be used in the manufacture of plastics materials and articles. That list should be amended so as to include other additives evaluated by the Scientific Committee on Food.
(3) For certain substances, the restrictions already established at Community level should be amended on the basis of the information available.
(4) The current list of additives is an incomplete list inasmuch as it does not contain all the substances, which are currently accepted in one or more Member States. Accordingly, these substances continue to be regulated by national laws only pending a decision on inclusion in the Community list.
(5) This Directive establishes specifications for only a few substances. The other substances, which may require specifications, therefore remain regulated in this respect by national laws only pending a decision at Community level.
(6) Directive 90/128/EEC should therefore be amended accordingly.
(7) The measures provided for in this Directive are in accordance with the opinion of the Standing Committee on Foodstuffs,
HAS ADOPTED THIS DIRECTIVE:
Article 1
Annexes II, III, V and VI to Directive 90/128/EEC are amended as set out in the Annex to this Directive.
Article 2
Member States shall adopt and publish, by 28 February 2003 at the latest, the provisions necessary to comply with this Directive. They shall forthwith inform the Commission thereof.
They shall apply those provisions in such a way as to:
(a) permit the trade in and use of plastic materials and articles intended to come into contact with foodstuffs and complying with this Directive, from 1 March 2003;
(b) prohibit the manufacture and importation into the Community of plastic materials and articles intended to come into contact with foodstuffs and which do not comply with this Directive, from 1 March 2004. However, for materials and articles which contain divinylbenzene and do not comply with the restriction set in this Directive, Member States shall prohibit their manufacture and importation into the Community as from 1 March 2003.
When Member States adopt these provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
Article 3
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Communities.
Article 4
This Directive is addressed to the Member States.
Done at Brussels, 21 February 2002.
For the Commission
David Byrne
Member of the Commission
(1) OJ L 40, 11.2.1989, p. 38.
(2) OJ L 75, 21.3.1990, p. 19.
(3) OJ L 221, 17.8.2001, p. 18.
ANNEX
The Annexes to Directive 90/128/EEC are amended as follows:
1. Annex II is amended as follows:
(a) In point 8:
(i) The definition of QM(T) is replaced by the following: "QM(T) = Maximum permitted quantity of the "residual" substance in the material or article expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the quantity of the substance in the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;"
(ii) the following text is inserted after QM(T): "QMA = Maximum permitted quantity of the "residual" substance in the finished material or article expressed as mg per 6 dm2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
QMA(T) = Maximum permitted quantity of the "residual" substance in the material or article expressed as mg of total of moiety or substance(s) indicated per 6 dm2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;"
(iii) The definitions of SML and SML(T) are replaced by the following: "SML = Specific migration limit in food or in food simulant, unless it is specified otherwise. For the purpose of this Directive the specific migration of the substance should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
SML(T) = Specific migration limit in food or in food simulant expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the specific migration of the substances should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method."
(b) Section A is amended as follows:
(i) The following monomers and other starting substances are inserted: >TABLE>
(ii) For the following monomers and other starting substances the content of the column "Restrictions and/or specifications" is replaced by the following: >TABLE>
(iii) The following monomers and other starting substances are transferred from Section B to Section A: >TABLE>
2. Annex III is amended as follows:
(a) The table of Section A is amended as follows:
(i) The following additives are inserted: >TABLE>
(ii) For the following additives the content of column "Restriction and/or specifications" is replaced by the following: >TABLE>
(iii) The following additive is deleted >TABLE>
(b) The table of Section B is amended as follows:
(i) The following additives are inserted: >TABLE>
(ii) For the following additives the content of column "Restriction and/or specifications" is replaced by the following: >TABLE>
3. Annex V is amended as follows: The following specifications are inserted in the table of Part B: >TABLE>
4. Annex VI is amended as follows:
(a) The notes (12) and (13) are replaced by the following: "(12) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 36720, 36800, 36840 and 92000.
(13) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 39090 and 39120."
(b) The following notes are added: "(23) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 13620, 36840, 40320 and 87040.
(24) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 13720 and 40580.
(25) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration levels of the following substances mentioned as PM/REF. Nos: 16650 and 51570.
(26) QM(T) in this specific case means that the restriction shall not be exceeded by the sum of the residual quantities of the following substances mentioned as PM/REF. Nos: 14950, 15700, 16240, 16570, 16600, 16630, 18640, 19110, 22332, 22420, 22570, 25210, 25240, 25270."