Avis juridique important

Council Directive 77/311/EEC of 29 March 1977 on the approximation of the laws of the Member States relating to the driver-perceived noise level of wheeled agricultural or forestry tractors Official Journal L 105 , 28/04/1977 P. 0001 - 0009 Finnish special edition: Chapter 13 Volume 7 P. 0016 Greek special edition: Chapter 13 Volume 6 P. 0022 Swedish special edition: Chapter 13 Volume 7 P. 0016 Spanish special edition: Chapter 13 Volume 7 P. 0026 Portuguese special edition Chapter 13 Volume 7 P. 0026

COUNCIL DIRECTIVE of 29 March 1977 on the approximation of the laws of the Member States relating to the driver-perceived noise level of wheeled agricultural or forestry tractors (77/311/EEC) THE COUNCIL OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof, Having regard to the proposal from the Commission, Having regard to the opinion of the European Parliament (1), Having regard to the opinion of the Economic and Social Committee (2), Whereas, in order to implement the procedure for EEC type-approval which was the subject of Council Directive 74/150/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to the type-approval of wheeled agricultural or forestry tractors (3), provisions should be adopted to ensure safe working conditions and, in particular, the protection of the hearing of agricultural workers driving such tractors; Whereas these provisions are particularly necessary as only in two Member States does the law lay down detailed provisions concerning the driver-perceived noise level of the abovementioned tractors; Whereas the disparities in the abovementioned national laws are likely to hinder trade within the Community and thus impede the establishment and the functioning of the common market, HAS ADOPTED THIS DIRECTIVE: Article 1 1. For the purposes of this Directive, "agricultural or forestry tractor" means any motor vehicle, fitted with wheels or endless tracks and having at least two axles, the main function of which lies in its tractive power and which is specially designed to tow, push, carry or power certain tools, machinery or trailers intended for agricultural or forestry use. It may be equipped to carry a load and passengers. 2. This Directive shall apply only to tractors defined in paragraph 1 which are fitted with pneumatic tyres and have two axles and a maximum design speed of between 6 and 25 km/h. (1)OJ No C 127, 18.10.1974, p. 34. (2)OJ No C 125, 16.10.1974, p. 30. (3)OJ No L 84, 28.3.1974, p. 10. Article 2 1. No Member State may refuse to grant EEC type-approval or national type-approval or prohibit the sale, registration or entry into service of any tractor on grounds relating to the driver-perceived noise level if this level is within the following limits: 90 dB (A) in accordance with Annex I, or 86 dB (A) in accordance with Annex II. For a transitional period expiring on a date to be fixed before 1 October 1981 in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC, the above limits for tests in accordance with 3.2.1.1 of Annex I and 3.2.2.1 of Annex II shall be increased by 6 dB (A). 2. For a transitional period expiring on a date to be fixed before 1 October 1981 in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC, Member States may authorize the national type-approval, sale, registration or entry into service of tractors without cab if their noise level is within the following limits: 96 dB (A) in accordance with Annex I, or 92 dB (A) in accordance with Annex II. Article 3 For the purposes of this Directive, "cab" means any structure built of rigid components, transparent or not, which totally encloses the driver and isolates him from the outside, and is capable of being kept permanently closed during service. Article 4 Member States shall take all necessary measures to ensure that in both the sales presentation and advertising there is nothing to suggest that the tractors have features regarding the driver-perceived noise level which they do not in fact possess. Article 5 Any amendments necessary to adapt the requirements of the Annexes to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC. Article 6 1. Member States shall bring into force the provisions necessary to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof. 2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission. Article 7 This Directive is addressed to the Member States. Done at Brussels, 29 March 1977. For the Council The President G. KAUFMAN ANNEX I APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT 1. UNIT OF MEASUREMENT AND MEASURING APPARATUS 1.1. Unit of measurement Noise level shall be measured in dB with A-weighting, expressed as dB (A). 1.2. Measuring apparatus Driver-perceived noise level shall be measured by means of a sound-level meter as described in the first edition of Publication 179/1965 of the International Electrotechnical Commission. In the case of variable readings, the average of the maximum values must be taken. 2. CONDITIONS OF MEASUREMENT Measurements shall be made under the following conditions: 2.1. the tractor must be unladen, i.e. without optional accessories, but must include coolant, lubricant, full fuel tank, tools and driver. The latter may not wear any abnormally thick clothing, scarf or hat. There may be no object on the tractor likely to distort the noise level; 2.2. the tyres must be inflated to the pressure recommended by the tractor manufacturer, the engine, transmission and drive axles must be at normal running temperature and radiator blinds when fitted must be kept open during measurements; 2.3. if it is liable to affect the noise level, extra equipment powered by the engine or self-powered such as windscreen wipers, warm air fan or power take-off, for example, may not be in operation when measurements are being made ; parts which normally operate at the same time as the engine, such as the engine cooling fan, for example, must be in operation when measurements are being made; 2.4. the test area must be in an open and sufficiently silent location ; it may take the form, for instance, of an open space of 50-metre radius, having a central part with a radius of at least 20 m which is practically level, or of a level section having a solid track with as flat a surface and as few gullies as possible. The track must be as clean and dry as possible (e.g. free of gravel, leaves, snow, etc.). Slopes and irregularities are acceptable only if the variations in noise level caused by them lie within the error tolerances of the measuring equipment; 2.5. the surface of the track must be such as not to cause excessive tyre noise; 2.6. the weather must be fine and dry with little or no wind. The driver-perceived ambient noise level due to the wind or other sources of noise must be at least 10 dB (A) below the noise level of the tractor; 2.7. if a vehicle is used for measurements, it must be towed or driven at sufficient distance from the tractor to avoid all interference. During measurements no object interfering with the measurements or reflective surfaces may be located within 20 m of each side of the test track and less than 20 m to the front or rear of the tractor. This condition can be considered fulfilled if the variations in noise level thus caused remain within the error tolerances ; if not, the measurements must be discontinued for the duration of the interference; 2.8. all measurements in a given series must be carried out on the same track. 3. METHOD OF MEASUREMENT 3.1. The microphone must be located 250 mm to the side of the centre plane of the seat, the side being that on which the higher noise level is encountered. The microphone diaphragm must face forward and the centre of the microphone must be 790 mm above and 150 mm forward of the seat reference point described in Annex III. Excessive vibration of the microphone must be avoided. 3.2. The maximum noise level in dB (A) shall be determined as follows: 3.2.1. all openings (e.g. doors, windows) in tractors having a closed series-produced cab structure must be closed during an initial series of measurements. 3.2.1.1. During a second series of measurements they must be left open, provided that when open they do not create a road safety hazard, but fold-down or fold-up windscreens must remain closed; 3.2.2. noise must be measured using slow sound-level meter response at the load corresponding to the maximum noise in the gear giving the forward speed nearest to 7 725 km/h. The governor control lever must be fully open. Starting with no load, the load applied must be increased until the maximum noise level is found. After each increase of load, time must be allowed for the noise level to stabilize before making the measurement; 3.2.3. noise must be measured using slow sound-level meter response at the load corresponding to the maximum noise in any gear other than that referred to in 3.2.2 in which the noise level recorded is at least 1 dB (A) above that recorded in the gear referred to in 3.2.2. The governor control lever must be fully open. Starting with no load, the load applied must be increased until the maximum noise level is found. After each increase of load, time must be allowed for the noise level to stabilize before making the measurement; 3.2.4. noise must be measured at the maximum design speed of the unladen tractor. 3.3. The test report shall include noise-level measurements carried out under the following conditions: 3.3.1. in the gear giving the speed nearest to 7 725 km/h; 3.3.2. in any gear, if the conditions described in 3.2.3 are fulfilled; 3.3.3. at maximum design speed. 4. ASSESSMENT CRITERIA The measurements described in 3.2.1, 3.2.2, 3.2.3 and 3.2.4 may not exceed the values laid down in Article 2. ANNEX II APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT 1. UNIT OF MEASUREMENT AND MEASURING APPARATUS 1.1. Unit of measurement Noise level shall be measured in dB with A-weighting, expressed as dB (A). 1.2. Measuring apparatus Driver-perceived noise level shall be measured by means of a sound-level meter as described in the first edition of publication 179/1965 of the International Electrotechnical Commission. In the case of variable readings, the average of the maximum values must be taken. 2. CONDITIONS OF MEASUREMENT Measurements shall be made under the following conditions: 2.1. the tractor must be unladen, i.e. without optional accessories, but must include coolant, lubricant, full fuel tank, tools and driver. The latter may not wear any abnormally thick clothing, scarf or hat. There may be no object on the tractor likely to distort the noise level; 2.2. the tyres must be inflated to the pressure recommended by the tractor manufacturer, the engine, transmission and drive axles must be at normal running temperature and, if the engine has cooling louvres, these must remain completely open; 2.3. if it is liable to affect the noise level, extra equipment powered by the engine or self-powered such as windscreen wipers, warm air fan or power take-off, for example, may not be in operation when measurements are being made ; parts which normally operate at the same time as the engine, such as the engine cooling fan, for example, must be in operation when measurements are being made; 2.4. the test area must be in an open and sufficiently silent location : it may take the form, for instance, of an open space of 50-metre radius, having a central part with a radius of at least 20 m which is practically level, or of a level section having a solid track with as flat a surface and as few gullies as possible. The track must be as clean and dry as possible (e.g. free of gravel, leaves, snow, etc.). Slopes and irregularities are acceptable only if the variations in noise level caused by them lie within the error tolerances of the measuring equipment; 2.5. the surface of the track must be such as not to cause excessive tyre noise; 2.6. the weather must be fine and dry with little or no wind. The driver-perceived ambient noise level due to the wind or other sources of noise must be at least 10 dB (A) below the noise level of the tractor; 2.7. if a vehicle is used for measurements, it must be towed or driven at sufficient distance from the tractor to avoid all interference. During measurements no object interfering with the measurements or reflective surfaces may be located within 20 m of each side of the test track and less than 20 m to the front or rear of the tractor. This condition can be considered fulfilled if the variations in noise level thus caused remain within the error tolerances ; if not, the measurements must be discontinued for the duration of the interference; 2.8. all measurements in a given series must be carried out on the same track. 3. METHOD OF MEASUREMENT 3.1. The microphone must be located 250 mm to the side of the central plane of the seat, the side being that on which the higher noise level is encountered. The microphone diaphragm must face forward and the centre of the microphone shall be 790 mm above and 150 mm forward of the seat reference point described in Annex III. Excessive vibration of the microphone must be avoided. 3.2. Noise level shall be determined as follows: 3.2.1. the tractor must travel along the section at the same test speed at least three times for at least 10 seconds; 3.2.2. all openings (e.g. doors, windows) in tractors having a closed series-produced cab structure must be closed during an initial series of measurements. 3.2.2.1. During a second series of measurements they must be left open, provided that when open they do not create a road safety hazard, but fold-down or fold-up windscreens must remain closed; 3.2.3. 3.2.3. noise must be measured at the maximum rpm using slow sound-level meter response i.e. in the gear giving the speed nearest to 7 725 km/h at the rated rpm. The tractor must be unladen when measurements are being made. 4. ASSESSMENT CRITERIA The measurements described in 3.2.2 and 3.2.3 may not exceed the values laid down in Article 2. ANNEX III DETERMINATION OF SEAT REFERENCE POINT 1. DEFINITION 1.1. The seat reference point (S) shall be the point in the central longitudinal plane of the seat where the tangential plane of the lower backrest and a horizontal plane intersect. This horizontal plane cuts the lower surface of the seat-pan board 150 mm in front of the seat reference point. 2. DETERMINATION OF SEAT REFERENCE POINT 2.1. The reference point shall be obtained using the device illustrated in figures 1 and 2 of the Appendix to this Annex, which makes it possible to simulate loading by a human occupant. 2.2. The seat must be set at the mid point of the range allowed for vertical adjustment, this adjustment being independent of the horizontal adjustment. For purposes of determining the microphone location referred to in section 3 of Annexes I and II, the seat must be at or as near as possible to the mid point of the horizontal adjustment range. 3. DESCRIPTION OF THE DEVICE 3.1. The device referred to in 2.1 shall consist of a seat-pan board and two backrest boards. 3.2. The lower backrest board shall be jointed in the region of the ischium humps (A) and loin (B), the joint (B) being adjustable in height (see figure 2). 4. SETTING UP THE DEVICE The device shall be set up as follows: 4.1. the device shall be positioned on the seat; 4.2. it shall then be loaded with a force of 550 N at a point 50 mm in front of joint (A), and the two backrest boards shall be lightly pressed tangentially against the backrest; 4.3. if it is not possible to determine a definite tangent to the lower area of the backrest, the lower backrest board in vertical position must be lightly pressed against the backrest; 4.4. in the case of seats with a suspension adjustable to the driver's weight, the suspension shall be set so that the seat is at a point equidistant from its two extreme positions. APPENDIX >PIC FILE= "T0010799"> >PIC FILE= "T0010800">

COUNCIL DIRECTIVE of 29 March 1977 on the approximation of the laws of the Member States relating to the driver-perceived noise level of wheeled agricultural or forestry tractors (77/311/EEC)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,

Having regard to the proposal from the Commission,

Having regard to the opinion of the European Parliament (1),

Having regard to the opinion of the Economic and Social Committee (2),

Whereas, in order to implement the procedure for EEC type-approval which was the subject of Council Directive 74/150/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to the type-approval of wheeled agricultural or forestry tractors (3), provisions should be adopted to ensure safe working conditions and, in particular, the protection of the hearing of agricultural workers driving such tractors;

Whereas these provisions are particularly necessary as only in two Member States does the law lay down detailed provisions concerning the driver-perceived noise level of the abovementioned tractors;

Whereas the disparities in the abovementioned national laws are likely to hinder trade within the Community and thus impede the establishment and the functioning of the common market,

HAS ADOPTED THIS DIRECTIVE:

Article 1

1. For the purposes of this Directive, "agricultural or forestry tractor" means any motor vehicle, fitted with wheels or endless tracks and having at least two axles, the main function of which lies in its tractive power and which is specially designed to tow, push, carry or power certain tools, machinery or trailers intended for agricultural or forestry use. It may be equipped to carry a load and passengers.

2. This Directive shall apply only to tractors defined in paragraph 1 which are fitted with pneumatic tyres and have two axles and a maximum design speed of between 6 and 25 km/h. (1)OJ No C 127, 18.10.1974, p. 34. (2)OJ No C 125, 16.10.1974, p. 30. (3)OJ No L 84, 28.3.1974, p. 10.

1. No Member State may refuse to grant EEC type-approval or national type-approval or prohibit the sale, registration or entry into service of any tractor on grounds relating to the driver-perceived noise level if this level is within the following limits:

90 dB (A) in accordance with Annex I, or

86 dB (A) in accordance with Annex II.

For a transitional period expiring on a date to be fixed before 1 October 1981 in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC, the above limits for tests in accordance with 3.2.1.1 of Annex I and 3.2.2.1 of Annex II shall be increased by 6 dB (A).

2. For a transitional period expiring on a date to be fixed before 1 October 1981 in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC, Member States may authorize the national type-approval, sale, registration or entry into service of tractors without cab if their noise level is within the following limits:

96 dB (A) in accordance with Annex I, or

92 dB (A) in accordance with Annex II.

Article 3

For the purposes of this Directive, "cab" means any structure built of rigid components, transparent or not, which totally encloses the driver and isolates him from the outside, and is capable of being kept permanently closed during service.

Article 4

Member States shall take all necessary measures to ensure that in both the sales presentation and advertising there is nothing to suggest that the tractors have features regarding the driver-perceived noise level which they do not in fact possess.

Any amendments necessary to adapt the requirements of the Annexes to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 74/150/EEC.

Article 6

1. Member States shall bring into force the provisions necessary to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.

2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.

Article 7

This Directive is addressed to the Member States.

Done at Brussels, 29 March 1977.

For the Council

The President

G. KAUFMAN

ANNEX I APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT

1. UNIT OF MEASUREMENT AND MEASURING APPARATUS 1.1. Unit of measurement

Noise level shall be measured in dB with A-weighting, expressed as dB (A).

1.2. Measuring apparatus

Driver-perceived noise level shall be measured by means of a sound-level meter as described in the first edition of Publication 179/1965 of the International Electrotechnical Commission.

In the case of variable readings, the average of the maximum values must be taken.

2. CONDITIONS OF MEASUREMENT

Measurements shall be made under the following conditions: 2.1. the tractor must be unladen, i.e. without optional accessories, but must include coolant, lubricant, full fuel tank, tools and driver. The latter may not wear any abnormally thick clothing, scarf or hat. There may be no object on the tractor likely to distort the noise level;

2.2. the tyres must be inflated to the pressure recommended by the tractor manufacturer, the engine, transmission and drive axles must be at normal running temperature and radiator blinds when fitted must be kept open during measurements;

2.3. if it is liable to affect the noise level, extra equipment powered by the engine or self-powered such as windscreen wipers, warm air fan or power take-off, for example, may not be in operation when measurements are being made ; parts which normally operate at the same time as the engine, such as the engine cooling fan, for example, must be in operation when measurements are being made;

2.4. the test area must be in an open and sufficiently silent location ; it may take the form, for instance, of an open space of 50-metre radius, having a central part with a radius of at least 20 m which is practically level, or of a level section having a solid track with as flat a surface and as few gullies as possible. The track must be as clean and dry as possible (e.g. free of gravel, leaves, snow, etc.). Slopes and irregularities are acceptable only if the variations in noise level caused by them lie within the error tolerances of the measuring equipment;

2.5. the surface of the track must be such as not to cause excessive tyre noise;

2.6. the weather must be fine and dry with little or no wind. The driver-perceived ambient noise level due to the wind or other sources of noise must be at least 10 dB (A) below the noise level of the tractor;

2.7. if a vehicle is used for measurements, it must be towed or driven at sufficient distance from the tractor to avoid all interference. During measurements no object interfering with the measurements or reflective surfaces may be located within 20 m of each side of the test track and less than 20 m to the front or rear of the tractor. This condition can be considered fulfilled if the variations in noise level thus caused remain within the error tolerances ; if not, the measurements must be discontinued for the duration of the interference;

2.8. all measurements in a given series must be carried out on the same track.

3. METHOD OF MEASUREMENT 3.1. The microphone must be located 250 mm to the side of the centre plane of the seat, the side being that on which the higher noise level is encountered.

The microphone diaphragm must face forward and the centre of the microphone must be 790 mm above and 150 mm forward of the seat reference point described in Annex III. Excessive vibration of the microphone must be avoided.

3.2. The maximum noise level in dB (A) shall be determined as follows: 3.2.1. all openings (e.g. doors, windows) in tractors having a closed series-produced cab structure must be closed during an initial series of measurements. 3.2.1.1. During a second series of measurements they must be left open, provided that when open they do not create a road safety hazard, but fold-down or fold-up windscreens must remain closed;

3.2.2. noise must be measured using slow sound-level meter response at the load corresponding to the maximum noise in the gear giving the forward speed nearest to 7 725 km/h.

The governor control lever must be fully open. Starting with no load, the load applied must be increased until the maximum noise level is found. After each increase of load, time must be allowed for the noise level to stabilize before making the measurement;

3.2.3. noise must be measured using slow sound-level meter response at the load corresponding to the maximum noise in any gear other than that referred to in 3.2.2 in which the noise level recorded is at least 1 dB (A) above that recorded in the gear referred to in 3.2.2.

The governor control lever must be fully open. Starting with no load, the load applied must be increased until the maximum noise level is found. After each increase of load, time must be allowed for the noise level to stabilize before making the measurement;

3.2.4. noise must be measured at the maximum design speed of the unladen tractor.

3.3. The test report shall include noise-level measurements carried out under the following conditions: 3.3.1. in the gear giving the speed nearest to 7 725 km/h;

3.3.2. in any gear, if the conditions described in 3.2.3 are fulfilled;

3.3.3. at maximum design speed.

4. ASSESSMENT CRITERIA

The measurements described in 3.2.1, 3.2.2, 3.2.3 and 3.2.4 may not exceed the values laid down in Article 2.

ANNEX II APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT

1. UNIT OF MEASUREMENT AND MEASURING APPARATUS 1.1. Unit of measurement

Noise level shall be measured in dB with A-weighting, expressed as dB (A).

1.2. Measuring apparatus

Driver-perceived noise level shall be measured by means of a sound-level meter as described in the first edition of publication 179/1965 of the International Electrotechnical Commission.

In the case of variable readings, the average of the maximum values must be taken.

2. CONDITIONS OF MEASUREMENT

Measurements shall be made under the following conditions: 2.1. the tractor must be unladen, i.e. without optional accessories, but must include coolant, lubricant, full fuel tank, tools and driver. The latter may not wear any abnormally thick clothing, scarf or hat. There may be no object on the tractor likely to distort the noise level;

2.2. the tyres must be inflated to the pressure recommended by the tractor manufacturer, the engine, transmission and drive axles must be at normal running temperature and, if the engine has cooling louvres, these must remain completely open;

2.3. if it is liable to affect the noise level, extra equipment powered by the engine or self-powered such as windscreen wipers, warm air fan or power take-off, for example, may not be in operation when measurements are being made ; parts which normally operate at the same time as the engine, such as the engine cooling fan, for example, must be in operation when measurements are being made;

2.4. the test area must be in an open and sufficiently silent location : it may take the form, for instance, of an open space of 50-metre radius, having a central part with a radius of at least 20 m which is practically level, or of a level section having a solid track with as flat a surface and as few gullies as possible. The track must be as clean and dry as possible (e.g. free of gravel, leaves, snow, etc.). Slopes and irregularities are acceptable only if the variations in noise level caused by them lie within the error tolerances of the measuring equipment;

2.5. the surface of the track must be such as not to cause excessive tyre noise;

2.6. the weather must be fine and dry with little or no wind.

The driver-perceived ambient noise level due to the wind or other sources of noise must be at least 10 dB (A) below the noise level of the tractor;

2.7. if a vehicle is used for measurements, it must be towed or driven at sufficient distance from the tractor to avoid all interference. During measurements no object interfering with the measurements or reflective surfaces may be located within 20 m of each side of the test track and less than 20 m to the front or rear of the tractor. This condition can be considered fulfilled if the variations in noise level thus caused remain within the error tolerances ; if not, the measurements must be discontinued for the duration of the interference;

2.8. all measurements in a given series must be carried out on the same track.

3. METHOD OF MEASUREMENT 3.1. The microphone must be located 250 mm to the side of the central plane of the seat, the side being that on which the higher noise level is encountered.

The microphone diaphragm must face forward and the centre of the microphone shall be 790 mm above and 150 mm forward of the seat reference point described in Annex III. Excessive vibration of the microphone must be avoided.

3.2. Noise level shall be determined as follows: 3.2.1. the tractor must travel along the section at the same test speed at least three times for at least 10 seconds;

3.2.2. all openings (e.g. doors, windows) in tractors having a closed series-produced cab structure must be closed during an initial series of measurements. 3.2.2.1. During a second series of measurements they must be left open, provided that when open they do not create a road safety hazard, but fold-down or fold-up windscreens must remain closed;

3.2.3. 3.2.3. noise must be measured at the maximum rpm using slow sound-level meter response i.e. in the gear giving the speed nearest to 7 725 km/h at the rated rpm. The tractor must be unladen when measurements are being made.

4. ASSESSMENT CRITERIA

The measurements described in 3.2.2 and 3.2.3 may not exceed the values laid down in Article 2.

ANNEX III DETERMINATION OF SEAT REFERENCE POINT

1. DEFINITION 1.1. The seat reference point (S) shall be the point in the central longitudinal plane of the seat where the tangential plane of the lower backrest and a horizontal plane intersect. This horizontal plane cuts the lower surface of the seat-pan board 150 mm in front of the seat reference point.

2. DETERMINATION OF SEAT REFERENCE POINT 2.1. The reference point shall be obtained using the device illustrated in figures 1 and 2 of the Appendix to this Annex, which makes it possible to simulate loading by a human occupant.

2.2. The seat must be set at the mid point of the range allowed for vertical adjustment, this adjustment being independent of the horizontal adjustment. For purposes of determining the microphone location referred to in section 3 of Annexes I and II, the seat must be at or as near as possible to the mid point of the horizontal adjustment range.

3. DESCRIPTION OF THE DEVICE 3.1. The device referred to in 2.1 shall consist of a seat-pan board and two backrest boards.

3.2. The lower backrest board shall be jointed in the region of the ischium humps (A) and loin (B), the joint (B) being adjustable in height (see figure 2).

4. SETTING UP THE DEVICE

The device shall be set up as follows: 4.1. the device shall be positioned on the seat;

4.2. it shall then be loaded with a force of 550 N at a point 50 mm in front of joint (A), and the two backrest boards shall be lightly pressed tangentially against the backrest;

4.3. if it is not possible to determine a definite tangent to the lower area of the backrest, the lower backrest board in vertical position must be lightly pressed against the backrest;

4.4. in the case of seats with a suspension adjustable to the driver's weight, the suspension shall be set so that the seat is at a point equidistant from its two extreme positions.

APPENDIX

>PIC FILE= "T0010799"> >PIC FILE= "T0010800">